多项式全家桶
Posted hs-black
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了多项式全家桶相关的知识，希望对你有一定的参考价值。
多项式全家桶(更新至快速幂)
开始爆肝多项式
1. FFT快速傅里叶变换
流程: 将多项式(Theta (nlog_n))转成点值表示形式 进行卷积, 再(Theta (nlog_n)) 转回来
离散傅里叶变换:
朴素转为点值, 需要将一个一个x带入, 而这里傅里叶搞到了几个可以优化的复数根
利用复数, 在复平面上画出一个单位圆, 将单位圆n等分, 每一个等分点为$omega_n^i $,
接下来将(omega^1_n omega^2_ncdotsomega^n_n) n个根带入, 其中(omega_n^i = cos(frac{k}{n}2pi) + i * sin(frac{k}{n}2pi))
稍等, 还要几个小性质才可以:
性质一: (omega^{2k}_{2n} = omega_n^k)
性质二: (omega_n^{k+frac{n}{2}} = - omega_n^k)
接下来开始快速傅里叶变换:
设A(x) = (a_0 + a_1x + a_2x^2 + cdots + a_{n-1}x^{n-1})
利用分治, 将A按x的指数分为奇偶两部分
(A(x)=(a_0+a_2x^2+cdots + a_{n-2}x^{n-2})+(a_1x+a_3x^3+cdots) $ a_{n-1}x^{n-1})$
设偶部分 (A_1(x) = a_0 + a_2x + a_4x^2 + cdots + a_{n-2}x^{frac{n}{2}-1})
奇部分(A_2(x) = a_1 + a_3x + a_5x^2 + cdots + a_{n-1}x^{frac{n}{2}-1})
则有: (A(x) = A_1(x^2) + x A_2(x^2))
设k < n/2 带入(x = omega^k_n)
(A(omega^k_n) = A_1(omega^{2k}_n) + omega_n^kA_2(omega^{2k}_n))
再带入 (omega^{k+frac{n}{2}}_n)
得(A(omega^{k+frac{n}{2}}_n) = A_1(omega^{2k}_n) -omega_n^kA_2(omega^{2k}_n))
你fa♂现了吗, 分治时, 两个求值一次解决
IDFT: 离散傅里叶逆变换
设((y_0,y_1,cdots,y_{n-1})) 为多项式A(x) = (a_0 + a_1x + a_2x^2 + cdots + a_{n-1}x^{n-1})的离散傅里叶变换
设多项式 B(x) = A(x) = (y_0 + y_1x + y_2x^2 + cdots + y_{n-1}x^{n-1})
将n个单位根的倒数带入得新的离散傅里叶变换
此处略去推导, 得(a_i = frac{z_i}{n})
非递归版fft
每个数递归到底层时的二进制表示恰是原来的表示翻转得到的
如 6(011) 到 3(110)
再加上蝴蝶变换就可以啦
#include<iostream>
#include<cstdio>
#include<cstring>
#include<cmath>
using namespace std;
const int N = 3000600;
template <typename T>
void read(T &x) {
x = 0; bool f = 0;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
if (f) x = -x;
}
struct Complex {
double x, y;
Complex (double xx = 0,double yy = 0) {x=xx,y=yy;}
Complex operator + (Complex &i) const {
return Complex(x + i.x, y + i.y);
}
Complex operator - (Complex &i) const {
return Complex(x - i.x, y - i.y);
}
Complex operator * (Complex &i) const {
return Complex(x * i.x - y * i.y, x * i.y + y * i.x);
}
}A[N], B[N];
const double Pi = acos(-1.0);
int n, m;
int lim = 1, L;
int r[N];
void FFT(Complex *a,int type) {
for (int i = 0;i < lim; i++)
if (r[i] > i) swap(a[r[i]], a[i]);
for (int mid = 1;mid < lim; mid <<= 1) {
Complex T(cos(Pi/mid), type * sin(Pi/mid));
for (int j = 0;j < lim; j += (mid << 1)) {
Complex t(1, 0);
for (int k = 0;k < mid; k++, t = t * T) {
Complex x = a[j + k], y = t * a[mid + j + k];
a[k + j] = x + y;
a[mid + j + k] = x - y;
}
}
}
}
int main() {
read(n), read(m);
for (int i = 0;i <= n; i++) {
int x; read(x);
A[i].x = x;
}
for (int i = 0;i <= m; i++) {
int x; read(x);
B[i].x = x;
}
while (lim <= (n + m)) lim <<= 1, L++;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
FFT(A, 1); FFT(B, 1);
for (int i = 0;i <= lim; i++) A[i] = A[i] * B[i];
FFT(A, -1);
for (int i = 0;i <= n + m; i++)
printf ("%d ", (int)(A[i].x / lim + 0.5));
return 0;
}
2.NTT快速数论变换
直接上代码
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int N = 3e6+6;
const int P = 998244353;
const int G = 3;
const int Gi = (P+1)/G;
inline int read(void) {
int x = 0, f = 1;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=-1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+c-'0';
return x * f;
}
int n, m, r[N], L;
ll A[N], B[N];
int lim = 1;
ll pow(ll di,ll mi) {
ll ans = 1, a = di;
while (mi) {
if (mi & 1) ans = ans * a % P;
a = a * a % P;
mi >>= 1;
}
return ans;
}
void NTT(ll *a, int tag) {
for (int i = 0;i < lim; i++)
if (i < r[i]) swap(a[i], a[r[i]]);
for (int mid = 1;mid < lim ;mid <<= 1) {
ll wn = pow(tag == 1 ? G : Gi, (P-1) / (mid << 1));
for (int j = 0;j < lim; j += (mid << 1)) {
ll w = 1;
for (int k = 0;k < mid ; k++, w = (w * wn) % P) {
ll x = a[j+k], y = w * a[j+k+mid] % P;
a[j+k] = (x + y) % P;
a[j+k+mid] = (x - y + P) % P;
}
}
}
}
int main() {
n = read(), m = read();
for (int i = 0;i <= n; i++) A[i] = read();
for (int j = 0;j <= m; j++) B[j] = read();
while (lim <= n + m) L++, lim <<= 1;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
NTT(A, 1), NTT(B, 1);
for (int i = 0;i <= lim; i++) A[i] = (A[i] * B[i]) % P;
NTT(A, -1);
ll inv = pow(lim, P-2);
for (int i = 0;i <= n + m; i++)
printf ("%d ", A[i] * inv % P);
return 0;
}
3.多项式求逆
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3;
const int Gi = (P+1)/G;
const int N = 3e5+5;
template <typename T>
void read(T &x) {
x = 0; int f = 1;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=-1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1) + c-'0';
x *= f;
}
ll A[N], n, lim = 1, L;
int r[N];
ll pow(ll di,ll mi) {
ll ans = 1;
while (mi) {
if (mi & 1) ans = (ans * di) % P;
di = (di * di) % P;
mi >>= 1;
}
return ans;
}
void NTT(ll *a, int type) {
for (int i = 0;i < lim; i++)
if (i < r[i]) swap(a[i], a[r[i]]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = pow(type == 1 ? G : Gi, (P-1)/(mid<<1));
for (int j = 0;j < lim;j += (mid << 1)) {
ll w = 1;
for (int k = 0;k < mid; k++, w = (w * wn) % P) {
ll x = a[j+k], y = w * a[j+k+mid] % P;
a[j+k] = (x + y) % P, a[j+k+mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = pow(lim, P-2);
for (int i = 0;i < lim; i++)
a[i] = a[i] * inv % P;
}
ll B[N], C[N];
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = pow(a[0], P-2);
return;
}
work((deg+1)>>1, a, b);
lim = 1, L = 0;
while (lim < (deg<<1)) lim <<= 1, L++;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
for (int i = 0;i < deg; i++) C[i] = a[i];
for (int i = deg;i < lim; i++) C[i] = 0;
NTT(C, 1), NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = ((ll)2 - C[i] * b[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
int main() {
read(n);
for (int i = 0;i < n; i++) read(A[i]);
work(n, A, B);
for (int i = 0;i < n; i++) printf ("%lld ", B[i]);
return 0;
}4.分治FFT
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3, Gi = (P+1) / G;
const int N = 405000;
ll fpw(ll di, ll mi) {
ll res = 1;
while (mi) {
if (mi & 1) res = res * di % P;
di = di * di % P;
mi >>= 1;
}
return res;
}
int lim, L;
ll r[N];
void NTT(ll *a,int type) {
for (int i = 0;i < lim; i++)
if (i < r[i]) swap(a[i], a[r[i]]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = fpw(type == 1 ? G : Gi, (P-1) / (mid<<1));
for (int i = 0;i < lim; i += mid << 1) {
ll w = 1;
for (int j = 0;j < mid; j++, w = w * wn % P) {
ll x = a[j + i], y = a[mid + i + j] * w % P;
a[i + j] = (x + y) % P;
a[i + j + mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = fpw(lim, P-2);
for (int i = 0;i < lim; i++) a[i] = a[i] * inv % P;
}
ll a[N], f[N], b[N], g[N];
void solve(int l,int R) {
if (l == R) return;
int mid = (l + R) >> 1;
solve(l, mid); lim = 1, L = 0;
int len = R - l + 1;
for (int i = l;i <= mid; i++) a[i-l] = f[i];
for (int i = 0;i < len; i++) b[i] = g[i];
len += mid - l + 1;
while (lim <= len) lim <<= 1, L++;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1)<<(L-1));
NTT(a, 1), NTT(b, 1);
for (int i = 0;i < lim; i++) a[i] = a[i] * b[i] % P;
NTT(a, -1);
for (int i = mid + 1;i <= R; i++) f[i] = (f[i] + a[i-l]) % P;
for (int i = 0;i < lim; i++) a[i] = b[i] = 0;
solve(mid + 1, R);
}
int read(void) {
int x = 0; char c = getchar();
while (!isdigit(c)) c=getchar();
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
return x;
}
int n;
int main() {
n = read();
for (int i = 1;i < n; i++) g[i] = read();
f[0] = 1;
solve(0, n - 1);
for (int i = 0;i < n; i++) printf ("%lld ", f[i]);
return 0;
}5.多项式ln：
#include<iostream>
#include<cstring>
#include<cstdio>
#define ll long long
using namespace std;
const int N = 505000;
const int P = 998244353;
const int G = 3;
const int Gi = (P+1) / G;
int read(void) {
int x = 0; bool f = 0;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
return f ? -x : x;
}
ll fpw(ll di,ll mi) {
ll ans = 1;
while (mi) {
if (mi & 1) ans = ans * di % P;
di = di * di % P;
mi >>= 1;
}
return ans;
}
ll A[N], B[N], C[N];
int r[N], n, lim, L;
void NTT(ll *a, int type) {
for (int i = 0;i < lim; i++)
if (i < r[i]) swap(a[i], a[r[i]]);
for (int j = 1;j < lim; j <<= 1) {
ll wn = fpw(type == 1 ? G : Gi, (P-1) / (j<<1));
for (int k = 0;k < lim; k += j << 1) {
ll w = 1;
for (int p = 0;p < j; p++, w = w * wn % P) {
ll x = a[p+k], y = a[p+k+j] * w % P;
a[p+k] = (x + y) % P;
a[p+k+j] = (x - y + P) % P;
}
}
}
if (~type) return;
ll inv = fpw(lim, P-2);
for (int i = 0;i < lim; i++)
a[i] = a[i] * inv % P;
}
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = fpw(a[0], P-2);
return;
}
work((deg+1)>>1, a, b);
lim = 1, L = 0;
while (lim < (deg<<1)) lim <<= 1, L++;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1)<<(L-1));
for (int i = 0;i < deg; i++) C[i] = a[i];
for (int i = deg;i < lim; i++) C[i] = 0;
NTT(C, 1); NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = ((ll)2 - C[i] * b[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
int m;
void qiudoor(void) {
for (int i = 1;i < n; i++) A[i-1] = A[i] * i % P;
A[n-1] = 0;
}
void jinitaimei(void) {
for (int i = n-1;i >= 1; i--) A[i] = A[i-1] * fpw(i, P-2) % P;
A[0] = 0;
}
int main() {
n = read();
for (int i = 0;i < n; i++) A[i] = read();
work(n, A, B); qiudoor();
lim = 1, L = 0; m = n;
while (lim <= n + m) lim <<= 1, L++;
NTT(A, 1); NTT(B, 1);
for (int i = 0;i < lim; i++) A[i] = A[i] * B[i] % P;
NTT(A, -1);
jinitaimei();
for (int i = 0;i < n; i++) printf ("%lld ", A[i] % P);
return 0;
}6.多项式exp
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3, Gi = (P+1) / G;
const int N = 1005000;
int read(void) {
int x = 0; char c = getchar();
while (!isdigit(c)) c=getchar();
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
return x;
}
ll fpw(ll di, ll mi) {
ll res = 1;
while (mi) {
if (mi & 1) res = res * di % P;
di = di * di % P;
mi >>= 1;
}
return res;
}
int lim, L;
int r[N];
void NTT(ll *a,int type) {
for (int i = 0;i < lim; i++)
if (r[i] > i) swap(a[r[i]], a[i]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = fpw(type == 1 ? G : Gi, (P-1) / (mid << 1));
for (int i = 0;i < lim; i += mid << 1) {
ll w = 1;
for (int j = 0;j < mid; j++, w = w * wn % P) {
int x = a[i + j], y = a[i + j + mid] * w % P;
a[i + j] = (x + y) % P;
a[i + j + mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = fpw(lim, P-2);
for (int i = 0;i < lim; i++) a[i] = a[i] * inv % P;
}
ll a[N], b[N], c[N];
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = fpw(a[0], P-2);
return;
}
work((deg+1) >> 1, a, b);
lim = 1, L = 0;
while (lim < (deg << 1)) lim <<= 1, L++;
for (int i = 0;i < lim ;i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
for (int i = 0;i < deg; i++) c[i] = a[i];
for (int i = deg; i < lim; i++) c[i] = 0;
NTT(b, 1); NTT(c, 1);
for (int i = 0;i < lim; i++)
b[i] = (2 - b[i] * c[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
int n;
void qiudoor(ll *a, int deg) {
for (int i = 1;i < n; i++) a[i-1] = a[i] * i % P;
a[n-1] = 0;
}
ll inv[N];
void init(void) {
inv[1] = 1;
for (int i = 2;i <= n * 2; i++)
inv[i] = (P - P / i * inv[P%i] % P) % P;
}
void jinitaimei(ll *a, int deg) {
for (int i = n-1;i >= 1; i--) a[i] = a[i-1] * inv[i] % P;
a[0] = 0;
}
ll A[N], B[N];
void get_ln(ll *a, ll n) {
for (int i = 0;i < n*2; i++) B[i] = 0;
// put(A, n), put(B, n*2);
work(n, a, B);
qiudoor(a, n);
NTT(a, 1); NTT(B, 1);
for (int i = 0;i < lim; i++) a[i] = a[i] * B[i] % P;
NTT(a, -1); jinitaimei(a, n);
}
void solve(int deg, ll *a, ll *b) {
if (deg == 1) return (void) (b[0] = 1);
solve(deg>>1, a, b);
for (int i = 0;i < deg; i++) A[i] = b[i];
get_ln(A, deg);
A[0] = (a[0] + 1 - A[0] + P) % P;
for (int i = 1;i < deg; i++)
A[i] = (a[i] - A[i] + P) % P;
NTT(A, 1); NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = b[i] * A[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
ll f[N], g[N];
int main() {
n = read(); init();
for (int i = 0;i < n; i++) f[i] = read();
lim = 1;
while (lim <= n) lim <<= 1;
solve(lim, f, g);
for (int i = 0;i < n; i++)
printf ("%d ", g[i]);
return 0;
}7.多项式开根
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3, Gi = (P+1) / G;
const int N = 1005000;
int read(void) {
int x = 0; char c = getchar();
while (!isdigit(c)) c=getchar();
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
return x;
}
ll fpw(ll di, ll mi) {
ll res = 1;
while (mi) {
if (mi & 1) res = res * di % P;
di = di * di % P;
mi >>= 1;
}
return res;
}
int lim, L;
int r[N];
void NTT(ll *a,int type) {
for (int i = 0;i < lim; i++)
if (r[i] > i) swap(a[r[i]], a[i]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = fpw(type == 1 ? G : Gi, (P-1) / (mid << 1));
for (int i = 0;i < lim; i += mid << 1) {
ll w = 1;
for (int j = 0;j < mid; j++, w = w * wn % P) {
int x = a[i + j], y = a[i + j + mid] * w % P;
a[i + j] = (x + y) % P;
a[i + j + mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = fpw(lim, P-2);
for (int i = 0;i < lim; i++) a[i] = a[i] * inv % P;
}
ll a[N], b[N], c[N];
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = fpw(a[0], P-2);
return;
}
work((deg+1) >> 1, a, b);
lim = 1, L = 0;
while (lim < (deg << 1)) lim <<= 1, L++;
for (int i = 0;i < lim ;i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
for (int i = 0;i < deg; i++) c[i] = a[i];
for (int i = deg; i < lim; i++) c[i] = 0;
NTT(b, 1); NTT(c, 1);
for (int i = 0;i < lim; i++)
b[i] = (2 - b[i] * c[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
int n;
void qiudoor(ll *a, int deg) {
for (int i = 1;i < n; i++) a[i-1] = a[i] * i % P;
a[n-1] = 0;
}
ll inv[N];
void init(void) {
inv[1] = 1;
for (int i = 2;i <= n * 2; i++)
inv[i] = (P - P / i * inv[P%i] % P) % P;
}
void jinitaimei(ll *a, int deg) {
for (int i = n-1;i >= 1; i--) a[i] = a[i-1] * inv[i] % P;
a[0] = 0;
}
ll A[N], B[N];
void get_ln(ll *a, ll n) {
for (int i = 0;i < n*2; i++) B[i] = 0;
// put(A, n), put(B, n*2);
work(n, a, B);
qiudoor(a, n);
NTT(a, 1); NTT(B, 1);
for (int i = 0;i < lim; i++) a[i] = a[i] * B[i] % P;
NTT(a, -1); jinitaimei(a, n);
}
void solve(int deg, ll *a, ll *b) {
if (deg == 1) return (void) (b[0] = 1);
solve(deg>>1, a, b);
lim = 1, L = 0;
for (int i = 0;i < deg; i++) A[i] = b[i];
get_ln(A, deg);
A[0] = (a[0] + 1 - A[0] + P) % P;
for (int i = 1;i < deg; i++)
A[i] = (a[i] - A[i] + P) % P;
NTT(A, 1); NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = b[i] * A[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
ll f[N], g[N];
int main() {
n = read(); init();
for (int i = 0;i < n; i++) f[i] = read();
get_ln(f, n);
for (int i = 0;i < n; i++) f[i] = f[i] * inv[2] % P;
lim = 1;
while (lim <= n) lim <<= 1;
solve(lim, f, g);
for (int i = 0;i < n; i++)
printf ("%d ", g[i]);
return 0;
}
8.多项式除法
#include<iostream>
#include<cstdio>
#include<cstring>
#include<algorithm>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3;
const int Gi = (P+1)/G;
const int N = 3e5+5;
template <typename T>
void read(T &x) {
x = 0; int f = 1;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=-1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1) + c-'0';
x *= f;
}
ll A[N], n, lim = 1, L;
int r[N];
ll pow(ll di,ll mi) {
ll ans = 1;
while (mi) {
if (mi & 1) ans = (ans * di) % P;
di = (di * di) % P;
mi >>= 1;
}
return ans;
}
void NTT(ll *a, int type) {
for (int i = 0;i < lim; i++)
if (i < r[i]) swap(a[i], a[r[i]]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = pow(type == 1 ? G : Gi, (P-1)/(mid<<1));
for (int j = 0;j < lim;j += (mid << 1)) {
ll w = 1;
for (int k = 0;k < mid; k++, w = (w * wn) % P) {
ll x = a[j+k], y = w * a[j+k+mid] % P;
a[j+k] = (x + y) % P, a[j+k+mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = pow(lim, P-2);
for (int i = 0;i < lim; i++)
a[i] = a[i] * inv % P;
}
ll B[N], C[N];
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = pow(a[0], P-2);
return;
}
work((deg+1)>>1, a, b);
lim = 1, L = 0;
while (lim < (deg<<1)) lim <<= 1, L++;
for (int i = 0;i < lim; i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
for (int i = 0;i < deg; i++) C[i] = a[i];
for (int i = deg;i < lim; i++) C[i] = 0;
NTT(C, 1), NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = ((ll)2 - C[i] * b[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
ll f[N], g[N], q[N], ff[N], gg[N];
int m;
int main() {
freopen("hs.in","r",stdin);
freopen("hs.out","w",stdout);
read(n), read(m);
for (int i = n;i >= 0; i--) read(f[i]), ff[n-i] = f[i];
for (int j = m;j >= 0; j--) read(g[j]), gg[m-j] = g[j];
for (int i = n - m + 1;i <= n; i++) f[i] = g[i] = 0;
work(n-m+1, g, B);
NTT(B, 1); NTT(f, 1);
for (int i = 0;i < lim; i++) q[i] = f[i] * B[i] % P;
NTT(q, -1);
reverse(q, q + n - m + 1);
for (int i = 0;i <= n - m; i++) printf ("%lld ", q[i]);
lim = 1, L = 0;
while (lim <= n) lim <<= 1, L++;
for (int i = n - m + 1;i < lim; i++) q[i] = 0;
for (int i = 0;i < lim; i++) r[i] = (r[i>>1]>>1) | ((i&1)<<(L-1));
NTT(gg, 1); NTT(q, 1);
for (int i = 0;i < lim; i++) gg[i] = gg[i] * q[i] % P;
NTT(gg, -1);
putchar('
');
for (int i = 0;i < m; i++) printf ("%lld ", (ff[i] - gg[i] + P) % P);
return 0;
}9.拉格朗日插值
#include<iostream>
#include<cstdio>
#include<cstring>
#include<algorithm>
#define ll long long
using namespace std;
const int P = 998244353;
const int N = 3e5+5;
template <typename T>
void read(T &x) {
x = 0; int f = 1;
char c = getchar();
for (;!isdigit(c);c=getchar()) if (c=='-') f=-1;
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1) + c-'0';
x *= f;
}
ll fpw(ll x,ll mi) {
ll res = 1;
while (mi) {
if (mi & 1) res = res * x % P;
x = x * x % P;
mi >>= 1;
}
return res;
}
int x[N], y[N], n, k;
int main() {
read(n), read(k);
for (int i = 1;i <= n; i++) read(x[i]), read(y[i]);
ll res = 0;
for (int i = 1;i <= n; i++) {
ll ans1 = 1, ans2 = 1;
for (int j = 1;j <= n; j++) {
if (j == i) continue;
ans1 = ans1 * (k - x[j]) % P;
ans2 = ans2 * (x[i] - x[j]) % P;
}
res += y[i] * ans1 % P * fpw(ans2, P-2) % P;
}
res %= P;
if (res < 0) res += P;
cout << res << endl;
return 0;
}10. 多项式快速幂
#include<iostream>
#include<cstdio>
#include<cstring>
#define ll long long
using namespace std;
const int P = 998244353;
const int G = 3, Gi = (P+1) / G;
const int N = 1005000;
int read(void) {
int x = 0; char c = getchar();
while (!isdigit(c)) c=getchar();
for (;isdigit(c);c=getchar()) x=(x<<3)+(x<<1)+(c^48);
return x;
}
ll fpw(ll di, ll mi) {
ll res = 1;
while (mi) {
if (mi & 1) res = res * di % P;
di = di * di % P;
mi >>= 1;
}
return res;
}
int lim, L;
int r[N];
void NTT(ll *a,int type) {
for (int i = 0;i < lim; i++)
if (r[i] > i) swap(a[r[i]], a[i]);
for (int mid = 1;mid < lim; mid <<= 1) {
ll wn = fpw(type == 1 ? G : Gi, (P-1) / (mid << 1));
for (int i = 0;i < lim; i += mid << 1) {
ll w = 1;
for (int j = 0;j < mid; j++, w = w * wn % P) {
int x = a[i + j], y = a[i + j + mid] * w % P;
a[i + j] = (x + y) % P;
a[i + j + mid] = (x - y + P) % P;
}
}
}
if (type == 1) return;
ll inv = fpw(lim, P-2);
for (int i = 0;i < lim; i++) a[i] = a[i] * inv % P;
}
ll a[N], b[N], c[N];
void work(int deg, ll *a, ll *b) {
if (deg == 1) {
b[0] = fpw(a[0], P-2);
return;
}
work((deg+1) >> 1, a, b);
lim = 1, L = 0;
while (lim < (deg << 1)) lim <<= 1, L++;
for (int i = 0;i < lim ;i++)
r[i] = (r[i>>1]>>1) | ((i&1) << (L-1));
for (int i = 0;i < deg; i++) c[i] = a[i];
for (int i = deg; i < lim; i++) c[i] = 0;
NTT(b, 1); NTT(c, 1);
for (int i = 0;i < lim; i++)
b[i] = (2 - b[i] * c[i] % P + P) % P * b[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
int n;
void qiudoor(ll *a, int deg) {
for (int i = 1;i < n; i++) a[i-1] = a[i] * i % P;
a[n-1] = 0;
}
ll inv[N];
void init(void) {
inv[1] = 1;
for (int i = 2;i <= n * 2; i++)
inv[i] = (P - P / i * inv[P%i] % P) % P;
}
void jinitaimei(ll *a, int deg) {
for (int i = n-1;i >= 1; i--) a[i] = a[i-1] * inv[i] % P;
a[0] = 0;
}
ll A[N], B[N];
void get_ln(ll *a, ll n) {
for (int i = 0;i < n*2; i++) B[i] = 0;
// put(A, n), put(B, n*2);
work(n, a, B);
qiudoor(a, n);
NTT(a, 1); NTT(B, 1);
for (int i = 0;i < lim; i++) a[i] = a[i] * B[i] % P;
NTT(a, -1); jinitaimei(a, n);
}
void solve(int deg, ll *a, ll *b) {
if (deg == 1) return (void) (b[0] = 1);
solve(deg>>1, a, b);
for (int i = 0;i < deg; i++) A[i] = b[i];
get_ln(A, deg);
A[0] = (a[0] + 1 - A[0] + P) % P;
for (int i = 1;i < deg; i++)
A[i] = (a[i] - A[i] + P) % P;
NTT(A, 1); NTT(b, 1);
for (int i = 0;i < lim; i++)
b[i] = b[i] * A[i] % P;
NTT(b, -1);
for (int i = deg;i < lim; i++) b[i] = 0;
}
ll f[N], g[N];
ll get_k(void) {
ll x = 0; char c = getchar();
while (!isdigit(c)) c=getchar();
for (;isdigit(c);c=getchar()) {
x=(x<<3)+(x<<1)+(c^48);
if (x >= P) x %= P;
}
return x;
}
ll k;
int main() {
n = read(); init(); k = get_k();
for (int i = 0;i < n; i++) f[i] = read();
get_ln(f, n);
for (int i = 0;i < n; i++) f[i] = f[i] * k % P;
lim = 1;
while (lim <= n) lim <<= 1;
solve(lim, f, g);
for (int i = 0;i < n; i++)
printf ("%d ", g[i]);
return 0;
}以上是关于多项式全家桶的主要内容，如果未能解决你的问题，请参考以下文章