OpenShift 4.2 离线安装补充记录

Posted 2020-11-21 ericnie

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了OpenShift 4.2 离线安装补充记录相关的知识，希望对你有一定的参考价值。

OpenShift4.2详细安装参考同事王征的安装手册(感谢王征大师的研究和答疑解惑, 大坑文章都已经搞定了，我这里是一些小坑)

https://github.com/wangzheng422/docker_env/blob/master/redhat/ocp4/4.2.disconnect.install.md

因为我这边的环境有些不同，所以这里只是自己的补充记录，详细的需要对照来看.

1.架构

技术图片

启动的虚拟机通过bridge和主机网络在同一个网段，ip规划保持和文档一致

Bootstrap nodes	192.168.7.12
master-0.ocp4.redhat.ren	192.168.7.13
master-1.ocp4.redhat.ren	192.168.7.14
master-2.ocp4.redhat.ren	192.168.7.15
worker-0.ocp4.redhat.ren	192.168.7.16
worker-1.ocp4.redhat.ren	192.168.7.17
worker-2.ocp4.redhat.ren	192.168.7.18

2.网络

我手头的机器是4台NUC,每台4CPU,32G内存，而4.2OCP集群最少需要3台master, 1个bootstrap,1台作为负载均衡，dns解析等工作，再配上几个worker节点，因此需要的机器在6+以上，采用虚拟机后,OpenShift节点启动以后的跨主机网络连接就是一个问题。

经过尝试，采用的是KVM的Bridge模式，具体设置如下。

在每台机器上设置

添加一个br0

[root@base ocp4]# cat /etc/sysconfig/network-scripts/ifcfg-br0 
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.7.1
NETMASK=255.255.255.0
GATEWAY=192.168.7.1
ONBOOT=yes
DEFROUTE=yes
NAME=br0
DEVICE=br0
PREFIX=25

修改现有的网卡加入br0

[root@base ocp4]# cat /etc/sysconfig/network-scripts/ifcfg-eno1 
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
#IPADDR=192.168.7.1
#NETMASK=255.255.255.0
#GATEWAY=192.168.7.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=eno1
UUID=4e9504c6-a5c4-4093-88b8-89a153dd66de
DEVICE=eno1
ONBOOT=yes
BRIDGE=br0

重启网络

systemctl restart network

启动以后验证笔记本还能继续连接

[root@base ocp4]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP group default qlen 1000
    link/ether 00:1f:c6:9c:56:60 brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:c2:c6:f0:c8:78 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 00:1f:c6:9c:56:60 brd ff:ff:ff:ff:ff:ff
    inet 192.168.7.1/25 brd 192.168.7.127 scope global noprefixroute br0
       valid_lft forever preferred_lft forever
    inet6 fe80::e458:f6ff:fea8:b655/64 scope link 
       valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:6d:9d:9f brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000
    link/ether 52:54:00:6d:9d:9f brd ff:ff:ff:ff:ff:ff
12: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:9c:66:29 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fe9c:6629/64 scope link 
       valid_lft forever preferred_lft forever
20: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:88:62:de brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fe88:62de/64 scope link 
       valid_lft forever preferred_lft forever

网络生效后，应该生成的虚拟机可以访问主机网络。

建立虚拟机采用的网络

[root@base data]# cat virt-net.xml
<network>
  <name>br0</name>
  <forward  mode=‘bridge‘>
    <bridge name =‘br0‘/>
  </forward>
</network>

virsh net-define --file virt-net.xml
virsh net-autostart br0
virsh net-start br0

查看一下

[root@base data]# virsh net-list
 Name                 State      Autostart     Persistent
----------------------------------------------------------
 br0                  active     yes           yes
 default              active     yes           yes

3. Yum源设置

参照3.11来设置yum源，但有一点要注意，尽量用3.11的高版本，之前用3.11.16来设置，结果导致podman build镜像到本地有问题，后来替换成3.11.146版本的yum.

[root@base ocp4]# cat /etc/yum.repos.d/base.repo 
[base]
name=base
baseurl=http://192.168.7.1:8080/repo/rhel-7-server-rpms/
enabled=1
gpgcheck=0
[ansible]
name=ansible
baseurl=http://192.168.7.1:8080/repo/rhel-7-server-ansible-2.6-rpms/
enabled=1
gpgcheck=0
[extra]
name=extra
baseurl=http://192.168.7.1:8080/repo/rhel-7-server-extras-rpms/
enabled=1
gpgcheck=0
[ose]
name=ose
baseurl=http://192.168.7.1:8080/repo/rhel-7-server-ose-3.11-rpms/
enabled=1
gpgcheck=0

4.启动虚拟机和安装过程

指定bridge网络启动，调整了网络和ram的大小

virt-install --name=ocp4-bootstrap --vcpus=4 --ram=8192 --disk path=/data/kvm/ocp4-bootstrap.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/bootstrap-static.iso   

virt-install --name=ocp4-master0 --vcpus=4 --ram=16384 --disk path=/data/kvm/ocp4-master0.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/master-0.iso 

virt-install --name=ocp4-master1 --vcpus=4 --ram=16384 --disk path=/data/kvm/ocp4-master1.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/master-1.iso 

virt-install --name=ocp4-master2 --vcpus=4 --ram=16384 --disk path=/data/kvm/ocp4-master2.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/master-2.iso 

virt-install --name=ocp4-worker0 --vcpus=4 --ram=8192 --disk path=/data/kvm/ocp4-worker0.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/worker-0.iso 

virt-install --name=ocp4-worker1 --vcpus=4 --ram=8192 --disk path=/data/kvm/ocp4-worker1.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/worker-1.iso 

virt-install --name=ocp4-worker2 --vcpus=4 --ram=8192 --disk path=/data/kvm/ocp4-worker2.qcow2,bus=virtio,size=120 --os-variant rhel8.0 --network bridge=br0,model=virtio --boot menu=on --cdrom /data/ocp4/worker-2.iso

等大概5分钟时间bootstrap会ready, 可以ready以后在建立其他虚拟机

技术图片

等待一段时间后

技术图片

在helper节点上通过命令查看安装进度

openshift-install wait-for bootstrap-complete --log-level debug

处理完存储后，还是在helper节点

[root@helper ocp4]# openshift-install wait-for install-complete
INFO Waiting up to 30m0s for the cluster at https://api.ocp4.redhat.ren:6443 to initialize... 
INFO Waiting up to 10m0s for the openshift-console route to be created... 
INFO Install complete!                            
INFO To access the cluster as the system:admin user when using ‘oc‘, run ‘export KUBECONFIG=/root/ocp4/auth/kubeconfig‘ 
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.ocp4.redhat.ren 
INFO Login to the console with user: kubeadmin, password: WRTp9-avPVu-IMWLX-KiIQ2

5. 关于bootstrap节点不ready问题

刚开始的时候，haproxy界面中bootstrap一直不ready,登录到helper上去 sudo -i, podman images看到镜像为空。

查看192.168.7.1的registry服务，发现shake hand error.

需要更新install-config.yaml中的additionalTrustBundle,和/etc/crts/redhat.ren.crt 一致

install-config.yaml中需要修改的部分用粗体标出

apiVersion: v1
baseDomain: redhat.ren
compute:
- hyperthreading: Enabled
  name: worker
  replicas: 3
controlPlane:
  hyperthreading: Enabled
  name: master
  replicas: 3
metadata:
  name: ocp4
networking:
  clusterNetworks:
  - cidr: 10.254.0.0/16
    hostPrefix: 24
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  none: {}
pullSecret: ‘{"auths":{"registry.redhat.ren": {"auth": "ZHVtbXk6ZHVtbXk=","email": "noemail@localhost"}}}‘
sshKey: ‘ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCnejC+QkKXqEOj7lSKxpHnnIxPli2iwNveE9apd0QUFgc3xTyaQWyOqbFEsUzR2MnXV36a89DiOVnecVgXZqVDFrDZDRkMLKJTm2U85AExWE0Lmtkxpmyg5OdpFmTBCutpNy2LigG8LTkMPXIgDrfNF+37/BvKzvWdrhR6/dQwqfMGqfRi+PYscD6nUJG5kAzVugalyw8+Sv9CzS+4BMRCZ4EVKu5bB2wl1bw7KCJc+D0nhnc87qGswJquleT7CGi7N2k6/Q1iK80l1KymmwWcwvh+Yf4Nhdk4cxbeSZmPGBQIQMmOUzK0Q4xs3XZd2WvZd/NYj0D83sSCQGXEUkGL root@helper‘
additionalTrustBundle: |
  -----BEGIN CERTIFICATE-----
  MIIDszCCApugAwIBAgIJAPRFC4yzZOpxMA0GCSqGSIb3DQEBCwUAMHAxCzAJBgNV
  BAYTAkNOMQswCQYDVQQIDAJHRDELMAkGA1UEBwwCU1oxGDAWBgNVBAoMD0dsb2Jh
  bCBTZWN1cml0eTEWMBQGA1UECwwNSVQgRGVwYXJ0bWVudDEVMBMGA1UEAwwMKi5y
  ZWRoYXQucmVuMB4XDTE5MTAxODEwMTAzMFoXDTI5MTAxNTEwMTAzMFowcDELMAkG
  A1UEBhMCQ04xCzAJBgNVBAgMAkdEMQswCQYDVQQHDAJTWjEYMBYGA1UECgwPR2xv
  YmFsIFNlY3VyaXR5MRYwFAYDVQQLDA1JVCBEZXBhcnRtZW50MRUwEwYDVQQDDAwq
  LnJlZGhhdC5yZW4wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDA1Mgq
  hGebtpCx93KtaaRw5jDRbxrTdJkZvV6Wyq1BYFRQDKZ3QOcFFOMrLbN7g8Nrw1dl
  zgvKLLc1l4god12RgOiM1fOVODoLIk2Z0x2VFbQ7ZIx0jKdKmaNex/fGd/MoLhij
  dYtAmZokjs7sw0VNkZLlHzPgR9AXYtJp07zUUL1eRWNTOhO8LxDUviOg2eVy31yW
  TrYla1ze7+meTvZs3edr5/dLncZ2PCiyaF6hOEf/t7ev4vA33p6SUY6prgaPaKlb
  PiB8+7ZKsucgXd/ikKoCP/0rMcqRSIrpYuudM8Dff8OGxhfL0ChUx3VkKd2t5T3l
  N3717qj+siuUb7OLAgMBAAGjUDBOMB0GA1UdDgQWBBTwuyzX5stt+Pyrs7VIr508
  1VMR8zAfBgNVHSMEGDAWgBTwuyzX5stt+Pyrs7VIr5081VMR8zAMBgNVHRMEBTAD
  AQH/MA0GCSqGSIb3DQEBCwUAA4IBAQBhhicfn9fY+PAxnVNn7R0PscxbYof4DVv3
  lqkkO6BCLkHUivljxjU7OYpxkva34vSuK1WVZf74Mbif7NkzVS3EG0+b0h+8EcQ+
  Fnv4qyKBfs8LG/V/A0ukAD5AYP098jsj5tmREbnFbMy7UojVEK54w6262iefvg0b
  uT5I0Y3jLljIlsxSbX4tTXjX0X/KHXK4PJ7hqdRLXnD4CgWKHjU6yNQS+sZg83VC
  jsZpKl5eSBqOdXB1CFteZm571/AXlagcyGf9hvK4fV2ybQoOxgkZt9zyUvtm3myb
  S5FAo4B5IvEhkge+jvolj31AWnB4v6GX0TgWotJd52GUpWDJDr5T
  -----END CERTIFICATE-----
imageContentSources:
- mirrors:
  - registry.redhat.ren/ocp4/openshift4
  source: quay.io/openshift-release-dev/ocp-release
- mirrors:
  - registry.redhat.ren/ocp4/openshift4
  source: quay.io/openshift-release-dev/ocp-v4.0-art-dev

6.证书过期问题

登录helper通过命令行去查安装进度

技术图片

需要重新删除openshift-install create ignition-configs 生成的部分。从下面这段重新开始

/bin/rm -rf *.ign .openshift_install_state.json auth bootstrap master0 master1 master2 worker0 worker1 worker2

openshift-install create ignition-configs --dir=/root/ocp4

当然我的问题是各机器的时间不同步，设置完时间同步后问题重新做问题解决。

安装完后访问

https://console-openshift-console.apps.ocp4.redhat.ren

技术图片

在Helper机器上

cd ~/ocp4
export KUBECONFIG=auth/kubeconfig

[root@helper ocp4]# oc get nodes
NAME                       STATUS   ROLES    AGE   VERSION
master-0.ocp4.redhat.ren   Ready    master   71m   v1.14.6+c07e432da
master-1.ocp4.redhat.ren   Ready    master   71m   v1.14.6+c07e432da
master-2.ocp4.redhat.ren   Ready    master   71m   v1.14.6+c07e432da
worker-0.ocp4.redhat.ren   Ready    worker   71m   v1.14.6+c07e432da
worker-1.ocp4.redhat.ren   Ready    worker   71m   v1.14.6+c07e432da
worker-2.ocp4.redhat.ren   Ready    worker   71m   v1.14.6+c07e432da

以上是关于OpenShift 4.2 离线安装补充记录的主要内容，如果未能解决你的问题，请参考以下文章

Openshift 4.4 静态 IP 离线安装系列：准备离线资源

Openshift 4.4 静态 IP 离线安装系列：初始安装

OpenShift 3.11离线环境的jenkins演示

OpenShift 4.2 Service Mesh

OpenShift 4.2 添加RHEL节点

下载 Xcode 4.2 文档以进行离线安装