KVM虚拟化介绍
Posted
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了KVM虚拟化介绍相关的知识，希望对你有一定的参考价值。
cpu虚拟：
- 宿主机：按时间切割
- 虚拟机：用软件虚拟cpu，主要模拟环0（接口，运行在真正cpu上程序）
硬件技术：缓存通过tagged tlb区分虚拟机和宿主机
虚拟化：cpu模拟环0，保持环3 （模拟环0并不高效）
- 完全虚拟化： 宿主机运行于环-1 虚拟机运行于环0
- 半(准)虚拟化 (para-virt)：cpu不用环-1 环0部分虚拟化（区分宿主机跟虚拟机） 环3全部能用
硬件虚拟化cpu 支持（AMD-V/inter-VT）：通过环 -1 实现，宿主机的内核运行在环-1，虚拟机的内核运行在环0上
内存：
1.宿主机：通过MMU 技术映射内存 ，MMU是硬件技术
2.虚拟机： 内存映射需要 shadowMMU 技术来映射虚拟内存地址到真正内存地址，shadowMMU是软件技术
硬件：Intel: EPT, Extended Page Table，AMD: NPT, Nested Page Table 代替shadowMMU映射
硬盘：
1.宿主机：分区，文件系统模式。
2.虚拟机：用文件模拟磁盘，半虚拟化，提升效率，告诉自己的文件系统说当前不是真正意义的磁盘，通过二次转发存到宿主机磁盘。
网络：
1.宿主机：按时间分割。
2.虚拟机：略复杂，不光虚拟网络接口，还要虚拟网络。半虚拟化加速。（透传最快，但是不适合迁移，所以一般都是用半虚拟化）
xen与kvm比较
kvm 硬件依赖
虚拟机需要cpu必须是x86_64架构，必须支持Intel VT或者AMD AMD-v
kvm两类组件：
- (kvm.ko)/dev/kvm：工作为hypervisor，在用户空间可通过系统调用ioctl()与内核中的kvm模块交互，从而完成虚拟机的创建、启动、停止、删除等各种管理功能；
- qemu-kvm进程：工作于用户空间，用于实现IO设备模拟；用于实现一个虚拟机实例；
virsh使用
用户空间管理工具安装
[[email protected] ~]# yum -y install libvirt libvirt-daemon-kvm qemu-kvm virt-manager启动libvirtd
[[email protected] ~]# systemctl start libvirtd
[[email protected] ~]# ss -lntup|grep br
udp UNCONN 0 0 * %virbr0:67 *:* users:(("dnsmasq",pid=1354,fd=3))
[[email protected] ~]# ip addr show virbr0 #默认是nat模式
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
link/ether 52:54:00:2b:4d:cf brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever创建桥设备
[[email protected] ~]# virsh help iface-bridge
[[email protected] ~]# virsh iface-bridge ens34 virbr1
#如果创建失败，手动编辑
[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-virbr1
DEVICE="virbr1"
ONBOOT="no"
TYPE="Bridge"
BOOTPROTO="none"
IPADDR="192.168.1.199"
NETMASK="255.255.255.0"
GATEWAY="192.168.1.1"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
DHCPV6C="no"
STP="on"
DELAY="0"
[[email protected] ~]# ip a virbr1
Command "virbr1" is unknown, try "ip address help".
[[email protected] ~]# ip addr show virbr1
6: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
link/ether 82:8b:a5:4e:fa:87 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.199/24 brd 192.168.1.255 scope global virbr1
valid_lft forever preferred_lft forever
图形化创建：
获取帮助
[[email protected] images]# virsh help所有主机状态查看
[[email protected] images]# virsh list --all
Id 名称 状态
----------------------------------------------------
- c1 关闭启动并连接
[[email protected] images]# virsh start c1 --console #可以用机器名 也可以是id，都是唯一脱离
control+]再次连接
[[email protected] images]# virsh list
Id 名称 状态
----------------------------------------------------
7 c1 running
[[email protected] images]# virsh console c1
连接到域 c1
换码符为 ^]正常关机
[[email protected] images]# virsh shutdown #id强行关机
[[email protected] images]# virsh destroy #id配置文件（基于配置文件做复制）
[[email protected] images]# virsh dumpxml 7 配置文件
[[email protected] images]# cd /etc/libvirt/qemu/
[[email protected] qemu]# ls
c1.xml networks
[[email protected] qemu]# cp c1.xml /root/c2.xml
[[email protected] qemu]# vim /root/c2.xml
<name>c2</name>
<uuid>0cfe85a0-e6b9-41f1-b718-86fb8c620b8c</uuid>
<mac address=‘52:54:00:7a:33:65‘/>
<source file=‘/root/cirros2.img‘/>
[[email protected] qemu]# virsh define /root/c2.xml
[[email protected] qemu]# virsh list --all
Id 名称 状态
----------------------------------------------------
7 c1 running
- c2 关闭
[[email protected] qemu]# virsh start c2
[[email protected] qemu]# virsh list --all
Id 名称 状态
----------------------------------------------------
7 c1 running
8 c2 running磁盘添加
[[email protected] qemu]# qemu-img create -f qcow2 -o preallocation=metadata,size=5G /vms/cirros/newdisk.qcow2
Formatting ‘/vms/cirros/newdisk.qcow2‘, fmt=qcow2 size=5368709120 encryption=off cluster_size=65536 preallocation=‘metadata‘ lazy_refcounts=off
[[email protected] qemu]# virsh attach-disk c2 /vms/cirros/newdisk.qcow2 vdb
成功附加磁盘
查看
[[email protected] ~]# virsh domblklist c2
目标 源
------------------------------------------------
vda /root/cirros2.img
vdb /vms/cirros/newdisk.qcow2拆除磁盘
[[email protected] ~]# virsh detach-disk c2 vdb
成功分离磁盘
[[email protected] ~]# virsh domblklist c2
目标 源
------------------------------------------------
vda /root/cirros2.imgqemu-kvm使用
[[email protected] ~]# ln -sv /usr/libexec/qemu-kvm /usr/bin/创建磁盘获取帮助
[[email protected] ~]# qemu-img info /vms/images/cirros.img
image: /vms/images/cirros.img
file format: qcow2
virtual size: 39M (41126400 bytes)
disk size: 13M
cluster_size: 65536
Format specific information:
compat: 0.10创建磁盘
[[email protected] ~]# qemu-img create -f qcow2 -o preallocation=metadata /vms/centos/centos7.img
[[email protected] ~]# qemu-img create -f qcow2 -o preallocation=metadata,size=5G /vms/centos/centos7.img
Formatting ‘/vms/centos/centos7.img‘, fmt=qcow2 size=5368709120 encryption=off cluster_size=65536 preallocation=‘metadata‘ lazy_refcounts=off查看大小
[[email protected] centos]# ll -h /vms/centos/centos7.img
-rw-r--r--. 1 root root 5.1G 6月 28 03:00 /vms/centos/centos7.img
[[email protected] centos]# du -h centos7.img
1.3M centos7.img #实际大小查看虚拟磁盘信息
[[email protected] centos]# qemu-img info centos7.img
image: centos7.img
file format: qcow2
virtual size: 5.0G (5368709120 bytes)
disk size: 1.3M
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false图形化启动
[[email protected] vms]# qemu-kvm -name centos -m 512 -cpu host -smp 1,cores=2 -drive file=/vms/centos/centos7.img,if=virtio,media=disk,cache=writeback,format=qcow2 -drive file=/vms/iso/centos-75.iso,media=cdrom -boot order=dc,once=d -vnc :0
[[email protected] vms]# yum -y install tigervnc
虚拟网络创建：（每一个虚拟都要创建2个网络接口，一个在宿主机上一个连接虚拟机）
[[email protected] vms]# brctl addbr br-int
[[email protected] vms]# ip link set br-int up
[[email protected] vms]# ip a
12: br-int: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN qlen 1000
link/ether 3e:3a:9f:29:61:6f brd ff:ff:ff:ff:ff:ff
inet6 fe80::3c3a:9fff:fe29:616f/64 scope link
valid_lft forever preferred_lft forever需要一个脚本
[[email protected] vms]# vim /etc/qemu-ifup
#!/bin/bash
#
bridge=br-int
if [ -n "$1" ];then
ip link set $1 up
sleep 1
brctl addif $bridge $1
[ $? -eq 0 ] && exit 0 || exit 1
else
echo "Error: no interface specified."
exit 1
fi
[[email protected] vms]# chmod a+x /etc/qemu-ifup设置网络为桥接 启动2个实例
[[email protected] images]# qemu-kvm -name c1 -m 256 -smp 2 -drive file=/vms/images/cirros1.img,media=disk,if=virtio,format=qcow2 -net nic,model=virtio,macaddr=52:54:00:01:00:00 -net tap,script=/etc/qemu-ifup -vnc :0 -daemonize
[[email protected] images]# qemu-kvm -name c2 -m 256 -smp 2 -drive file=/vms/images/cirros2.img,media=disk,if=virtio,format=qcow2 -net nic,model=virtio,macaddr=52:54:00:01:00:01 -net tap,script=/etc/qemu-ifup -vnc :1 -daemonize宿主机上留2个ip（另外两个在虚拟机中）
[[email protected] images]# brctl show
bridge name bridge id STP enabled interfaces
br-int 8000.1eeb8ad38953 no tap0
tap1
virbr0 8000.5254002b4dcf yes virbr0-nic
virbr1 8000.000000000000 yes
[[email protected] images]# ifconfig
tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::6c2d:5fff:fe37:7495 prefixlen 64 scopeid 0x20<link>
ether 6e:2d:5f:37:74:95 txqueuelen 1000 (Ethernet)
RX packets 8 bytes 1132 (1.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 15 bytes 1448 (1.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tap1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::1ceb:8aff:fed3:8953 prefixlen 64 scopeid 0x20<link>
ether 1e:eb:8a:d3:89:53 txqueuelen 1000 (Ethernet)
RX packets 7 bytes 800 (800.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0虚拟机：
宿主机设置网络：
[[email protected] images]# ifconfig br-int 10.1.1.254/24 up相当于这三个网络在同一物理环境中
dhcp
[[email protected] images]# yum install dnsmasq
#创建ip队
[[email protected] images]# ip link add vethy.1 type veth peer name vethy.2
[[email protected]ost images]# ifconfig vethy.1 up
一半添加到交换机中
[[email protected] images]# brctl addif br-int vethy.1
[[email protected] images]# brctl show
bridge name bridge id STP enabled interfaces
br-int 8000.1eeb8ad38953 no tap0
tap1
vethy.1
另外一半添加到一个名称空间中,并且启动dhcp
[[email protected] images]# ip netns add dhcpsrv
[[email protected] images]# ip link set dev vethy.2 netns dhcpsrv
[[email protected] images]# ip netns exec dhcpsrv ifconfig vethy.2 10.1.1.253/24 up
[[email protected] images]# ip netns exec dhcpsrv ifconfig vethy.2
vethy.2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.1.1.253 netmask 255.255.255.0 broadcast 10.1.1.255
inet6 fe80::8ee:dcff:fe38:9eaf prefixlen 64 scopeid 0x20<link>
ether 0a:ee:dc:38:9e:af txqueuelen 1000 (Ethernet)
RX packets 8 bytes 648 (648.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[[email protected] images]# ip netns exec dhcpsrv dnsmasq -F 10.1.1.11,10.1.1.100 -O 3,10.1.1.254
重启虚拟机
以上是关于KVM虚拟化介绍的主要内容，如果未能解决你的问题，请参考以下文章