libtorch(pytorch c++)教程

Posted 浩瀚之水_csdn

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了libtorch(pytorch c++)教程相关的知识,希望对你有一定的参考价值。

本章简要介绍如何如何用C++实现一个语义分割器模型,该模型具有训练和预测的功能。本文的分割模型架构使用简单的U-Net结构,代码结构参考了qubvel segmentation中的U-Net部分,该项目简称SMP,是基于pytorch实现的开源语义分割项目。本文分享的c++模型几乎完美复现了python的版本。

模型简介

简单介绍一下U-Net模型。U-Net模型的提出是在医学图像分割中,相比于当时的其他模型结构,U-Net的分割能力具有明显优势。一个经典的U-Net结构图如下:

U-Net模型采用典型的编码器-解码器结构,左边的编码部分类似VGG模型,是双卷积+下采样的多次堆叠。U-Net模型右边的解码部分同样是双卷积,但是为了得到接近原始输入图像大小的输出图像,针对编码的下采样实施了对应的上采样。最重要的是,U-Net之所以效果突出,重要原因在于其在解码部分利用了编码环节的特征图,拼接编码和解码的特征图,再对拼接后特征图卷积上采样,重复多次得到解码输出。

编码器——ResNet

本文介绍的编码器使用ResNet网络,同时可以像第五章一样加载预训练权重,即骨干网络为ImageNet预训练的ResNet。话不多说,直接上c++的ResNet代码。

Block搭建

建议看本文代码时打开pytorch的torchvision中的resnet.py,对比阅读。

首先是基础模块,pytorch针对resnet18,resne34和resnet50,resnet101,resnet152进行分类,resnet18与resnet34均使用BasicBlock,而更深的网络使用BottleNeck。我不想使用模板类编程,就直接将两个模块合为一体。声明如下:

class BlockImpl : public torch::nn::Module 
public:
    BlockImpl(int64_t inplanes, int64_t planes, int64_t stride_ = 1,
        torch::nn::Sequential downsample_ = nullptr, int groups = 1, int base_width = 64, bool is_basic = true);
    torch::Tensor forward(torch::Tensor x);
    torch::nn::Sequential downsample nullptr ;
private:
    bool is_basic = true;
    int64_t stride = 1;
    torch::nn::Conv2d conv1 nullptr ;
    torch::nn::BatchNorm2d bn1 nullptr ;
    torch::nn::Conv2d conv2 nullptr ;
    torch::nn::BatchNorm2d bn2 nullptr ;
    torch::nn::Conv2d conv3 nullptr ;
    torch::nn::BatchNorm2d bn3 nullptr ;
;
TORCH_MODULE(Block);

可以发现,其实是直接声明了三个conv结构和一个is_basic标志位判断定义时进行BasicBlock定义还是BottleNeck定义。下面时其定义

BlockImpl::BlockImpl(int64_t inplanes, int64_t planes, int64_t stride_,
    torch::nn::Sequential downsample_, int groups, int base_width, bool _is_basic)

    downsample = downsample_;
    stride = stride_;
	int width = int(planes * (base_width / 64.)) * groups;

    conv1 = torch::nn::Conv2d(conv_options(inplanes, width, 3, stride_, 1, groups, false));
    bn1 = torch::nn::BatchNorm2d(torch::nn::BatchNorm2dOptions(width));
    conv2 = torch::nn::Conv2d(conv_options(width, width, 3, 1, 1, groups, false));
    bn2 = torch::nn::BatchNorm2d(torch::nn::BatchNorm2dOptions(width));
    is_basic = _is_basic;
    if (!is_basic) 
        conv1 = torch::nn::Conv2d(conv_options(inplanes, width, 1, 1, 0, 1, false));
        conv2 = torch::nn::Conv2d(conv_options(width, width, 3, stride_, 1, groups, false));
        conv3 = torch::nn::Conv2d(conv_options(width, planes * 4, 1, 1, 0, 1, false));
        bn3 = torch::nn::BatchNorm2d(torch::nn::BatchNorm2dOptions(planes * 4));
    

    register_module("conv1", conv1);
    register_module("bn1", bn1);
    register_module("conv2", conv2);
    register_module("bn2", bn2);
    if (!is_basic) 
        register_module("conv3", conv3);
        register_module("bn3", bn3);
    

    if (!downsample->is_empty()) 
        register_module("downsample", downsample);
    


torch::Tensor BlockImpl::forward(torch::Tensor x) 
    torch::Tensor residual = x.clone();

    x = conv1->forward(x);
    x = bn1->forward(x);
    x = torch::relu(x);

    x = conv2->forward(x);
    x = bn2->forward(x);

    if (!is_basic) 
        x = torch::relu(x);
        x = conv3->forward(x);
        x = bn3->forward(x);
    

    if (!downsample->is_empty()) 
        residual = downsample->forward(residual);
    

    x += residual;
    x = torch::relu(x);

    return x;

然后不要忘了熟悉的conv_options函数,定义如下:

inline torch::nn::Conv2dOptions conv_options(int64_t in_planes, int64_t out_planes, int64_t kerner_size,
    int64_t stride = 1, int64_t padding = 0, int groups = 1, bool with_bias = true) 
    torch::nn::Conv2dOptions conv_options = torch::nn::Conv2dOptions(in_planes, out_planes, kerner_size);
    conv_options.stride(stride);
    conv_options.padding(padding);
    conv_options.bias(with_bias);
	conv_options.groups(groups);
    return conv_options;

和之前章节中的相比,增加了groups参数,同时with_bias默认打开,使用需要注意修改。

ResNet主体搭建

定义好Block模块后就可以设计ResNet了,c++中ResNet模型声明类似pytorch中的ResNet。但是初始化参数增加一个model_type,辅助判断采用哪种Block。

class ResNetImpl : public torch::nn::Module 
public:
    ResNetImpl(std::vector<int> layers, int num_classes = 1000, std::string model_type = "resnet18",
		int groups = 1, int width_per_group = 64);
    torch::Tensor forward(torch::Tensor x);
    std::vector<torch::Tensor> features(torch::Tensor x);
    torch::nn::Sequential _make_layer(int64_t planes, int64_t blocks, int64_t stride = 1);

private:
    int expansion = 1; bool is_basic = true;
	int64_t inplanes = 64; int groups = 1; int base_width = 64;
    torch::nn::Conv2d conv1 nullptr ;
    torch::nn::BatchNorm2d bn1 nullptr ;
    torch::nn::Sequential layer1 nullptr ;
    torch::nn::Sequential layer2 nullptr ;
    torch::nn::Sequential layer3 nullptr ;
    torch::nn::Sequential layer4 nullptr ;
    torch::nn::Linear fcnullptr;
;
TORCH_MODULE(ResNet);

在实现初始化函数之前,需要实现_make_layer函数。实现好_make_layer函数后再实现ResNet初始化函数,代码如下:

torch::nn::Sequential ResNetImpl::_make_layer(int64_t planes, int64_t blocks, int64_t stride) 

    torch::nn::Sequential downsample;
    if (stride != 1 || inplanes != planes * expansion) 
        downsample = torch::nn::Sequential(
            torch::nn::Conv2d(conv_options(inplanes, planes *  expansion, 1, stride, 0, 1, false)),
            torch::nn::BatchNorm2d(planes *  expansion)
        );
    
    torch::nn::Sequential layers;
    layers->push_back(Block(inplanes, planes, stride, downsample, groups, base_width, is_basic));
    inplanes = planes *  expansion;
    for (int64_t i = 1; i < blocks; i++) 
        layers->push_back(Block(inplanes, planes, 1, torch::nn::Sequential(), groups, base_width,is_basic));
    

    return layers;


ResNetImpl::ResNetImpl(std::vector<int> layers, int num_classes, std::string model_type, int _groups, int _width_per_group)

    if (model_type != "resnet18" && model_type != "resnet34")
    
        expansion = 4;
        is_basic = false;
    
	groups = _groups;
	base_width = _width_per_group;
    conv1 = torch::nn::Conv2d(conv_options(3, 64, 7, 2, 3, 1, false));
    bn1 = torch::nn::BatchNorm2d(torch::nn::BatchNorm2dOptions(64));
    layer1 = torch::nn::Sequential(_make_layer(64, layers[0]));
    layer2 = torch::nn::Sequential(_make_layer(128, layers[1], 2));
    layer3 = torch::nn::Sequential(_make_layer(256, layers[2], 2));
    layer4 = torch::nn::Sequential(_make_layer(512, layers[3], 2));

    fc = torch::nn::Linear(512 * expansion, num_classes);
    register_module("conv1", conv1);
    register_module("bn1", bn1);
    register_module("layer1", layer1);
    register_module("layer2", layer2);
    register_module("layer3", layer3);
    register_module("layer4", layer4);
    register_module("fc", fc);

前向传播及特征提取

前向传播相对简单,直接根据定义好的层往下传播即可。

torch::Tensor  ResNetImpl::forward(torch::Tensor x) 
    x = conv1->forward(x);
    x = bn1->forward(x);
    x = torch::relu(x);
    x = torch::max_pool2d(x, 3, 2, 1);

    x = layer1->forward(x);
    x = layer2->forward(x);
    x = layer3->forward(x);
    x = layer4->forward(x);

    x = torch::avg_pool2d(x, 7, 1);
    x = x.view( x.sizes()[0], -1 );
    x = fc->forward(x);

    return torch::log_softmax(x, 1);

但是本文是介绍分割用的,所以需要对不同的特征层进行提取,存储到std::vectortorch::Tensor中。

std::vector<torch::Tensor> ResNetImpl::features(torch::Tensor x)
    std::vector<torch::Tensor> features;
    features.push_back(x);
    x = conv1->forward(x);
    x = bn1->forward(x);
    x = torch::relu(x);
    features.push_back(x);
    x = torch::max_pool2d(x, 3, 2, 1);

    x = layer1->forward(x);
    features.push_back(x);
    x = layer2->forward(x);
    features.push_back(x);
    x = layer3->forward(x);
    features.push_back(x);
    x = layer4->forward(x);
    features.push_back(x);

    return features;

U-Net解码

上面的ResNet部分其实可以开单章详细讲解,但是参照源码读者应该容易理解,就直接放一起。如果上面的内容是对torchvision在libtorch中的优化,下面的部分可以看成直接对SMP中U-Net解码的c++复制。

直接上声明:

//attention and basic
class SCSEModuleImpl: public torch::nn::Module
public:
    SCSEModuleImpl(int in_channels, int reduction=16, bool use_attention = false);
    torch::Tensor forward(torch::Tensor x);
private:
    bool use_attention = false;
    torch::nn::Sequential cSEnullptr;
    torch::nn::Sequential sSEnullptr;
;TORCH_MODULE(SCSEModule);

class Conv2dReLUImpl: public torch::nn::Module
public:
    Conv2dReLUImpl(int in_channels, int out_channels, int kernel_size = 3, int padding = 1);
    torch::Tensor forward(torch::Tensor x);
private:
    torch::nn::Conv2d conv2dnullptr;
    torch::nn::BatchNorm2d bnnullptr;
;TORCH_MODULE(Conv2dReLU);

//decoderblock and center block
class DecoderBlockImpl: public torch::nn::Module
public:
    DecoderBlockImpl(int in_channels, int skip_channels, int out_channels, bool skip = true, bool attention = false);
    torch::Tensor forward(torch::Tensor x, torch::Tensor skip);
private:
    Conv2dReLU conv1nullptr;
    Conv2dReLU conv2nullptr;
    SCSEModule attention1nullptr;
    SCSEModule attention2nullptr;
    torch::nn::Upsample upsamplenullptr;
    bool is_skip = true;
;TORCH_MODULE(DecoderBlock);

torch::nn::Sequential CenterBlock(int in_channels, int out_channels);

class UNetDecoderImpl:public torch::nn::Module

public:
    UNetDecoderImpl(std::vector<int> encoder_channels, std::vector<int> decoder_channels, int n_blocks = 5,
                bool use_attention = false, bool use_center=false);
    torch::Tensor forward(std::vector<torch::Tensor> features);
private:
    torch::nn::Sequential centernullptr;
    torch::nn::ModuleList blocks = torch::nn::ModuleList();
;TORCH_MODULE(UNetDecoder);

#endif // UNETDECODER_H

直接上定义:

SCSEModuleImpl::SCSEModuleImpl(int in_channels, int reduction, bool _use_attention)
    use_attention = _use_attention;
    cSE = torch::nn::Sequential(
            torch::nn::AdaptiveAvgPool2d(torch::nn::AdaptiveAvgPool2dOptions(1)),
            torch::nn::Conv2d(conv_options(in_channels, in_channels / reduction, 1)),
            torch::nn::ReLU(torch::nn::ReLUOptions(true)),
            torch::nn::Conv2d(conv_options(in_channels / reduction, in_channels, 1)),
            torch::nn::Sigmoid());
    sSE = torch::nn::Sequential(torch::nn::Conv2d(conv_options(in_channels, 1, 1)), torch::nn::Sigmoid());
    register_module("cSE",cSE);
    register_module("sSE",sSE);


torch::Tensor SCSEModuleImpl::forward(torch::Tensor x)
    if(!use_attention) return x;
    return x * cSE->forward(x) + x * sSE->forward(x);


Conv2dReLUImpl::Conv2dReLUImpl(int in_channels, int out_channels, int kernel_size, int padding)
    conv2d = torch::nn::Conv2d(conv_options(in_channels,out_channels,kernel_size,1,padding));
    bn = torch::nn::BatchNorm2d(torch::nn::BatchNorm2dOptions(out_channels));
    register_module("conv2d", conv2d);
    register_module("bn", bn);


torch::Tensor Conv2dReLUImpl::forward(torch::Tensor x)
    x = conv2d->forward(x);
    x = bn->forward(x);
    return x;


DecoderBlockImpl::DecoderBlockImpl(int in_channels, int skip_channels, int out_channels, bool skip, bool attention)
    conv1 = Conv2dReLU(in_channels + skip_channels, out_channels, 3, 1);
    conv2 = Conv2dReLU(out_channels, out_channels, 3, 1);
    register_module("conv1", conv1);
    register_module("conv2", conv2);
    upsample = torch::nn::Upsample(torch::nn::UpsampleOptions().scale_factor(std::vector<double>(2,2)).mode(torch::kNearest));

    attention1 = SCSEModule(in_channels + skip_channels, 16, attention);
    attention2 = SCSEModule(out_channels, 16, attention);
    register_module("attention1", attention1);
    register_module("attention2", attention2);
    is_skip = skip;


torch::Tensor DecoderBlockImpl::forward(torch::Tensor x, torch::Tensor skip)
    x = upsample->forward(x);
    if (is_skip)
        x = torch::cat(x, skip, 1);
        x = attention1->forward(x);
    
    x = conv1->forward(x);
    x = conv2->forward(x);
    x = attention2->forward(x);
    return x;


torch::nn::Sequential CenterBlock(int in_channels, int out_channels)
    return torch::nn::Sequential(Conv2dReLU(in_channels, out_channels, 3, 1),
                                 Conv2dReLU(out_channels, out_channels, 3, 1));


UNetDecoderImpl::UNetDecoderImpl(std::vector<int> encoder_channels, std::vector<int> decoder_channels, int n_blocks,
                         bool use_attention, bool use_center)

    if (n_blocks != decoder_channels.size()) throw "Model depth not equal to your provided `decoder_channels`";
    std::reverse(std::begin(encoder_channels),std::end(encoder_channels));

    // computing blocks input and output channels
    int head_channels = encoder_channels[0];
    std::vector<int> out_channels = decoder_channels;
    decoder_channels.pop_back();
    decoder_channels.insert(decoder_channels.begin(),head_channels);
    std::vector<int> in_channels = decoder_channels;
    encoder_channels.erase(encoder_channels.begin());
    std::vector<int> skip_channels = encoder_channels;
    skip_channels[skip_channels.size()-1] = 0;

    if(use_center)  center = CenterBlock(head_channels, head_channels);
    else center = torch::nn::Sequential(torch::nn::Identity());
    //the last DecoderBlock of blocks need no skip tensor
    for (int i = 0; i< in_channels.size()-1; i++) 
        blocks->push_back(DecoderBlock(in_channels[i], skip_channels[i], out_channels[i], true, use_attention));
    
    blocks->push_back(DecoderBlock(in_channels[in_channels.size()-1], skip_channels[in_channels.size()-1],
            out_channels[in_channels.size()-1], false, use_attention));

    register_module("center", center);
    register_module("blocks", blocks);


torch::Tensor UNetDecoderImpl::forward(std::vector<torch::Tensor> features)
    std::reverse(std::begin(features),std::end(features));
    torch::Tensor head = features[0];
    features.erase(features.begin());
    auto x = center->forward(head);
    for (int i = 0; i<blocks->size(); i++) 
        x = blocks[i]->as<DecoderBlock>()->forward(x, features[i]);
    
    return x;

不展开说了,内容较多。后续还有U-Net整体和封装...

U-Net整体设计

这是U-Net的声明,分为编码器,解码器和分割头。

class UNetImpl : public torch::nn::Module

public:
    UNetImpl(int num_classes, std::string encoder_name = "resnet18", std::string pretrained_path = "", int encoder_depth = 5,
             std::vector<int> decoder_channels=256, 128, 64, 32, 16, bool use_attention = false);
    torch::Tensor forward(torch::Tensor x);
private:
    ResNet encodernullptr;
    UNetDecoder decodernullptr;
    SegmentationHead segmentation_headnullptr;
    int num_classes = 1;
    std::vector<int> BasicChannels = 3, 64, 64, 128, 256, 512;
    std::vector<int> BottleChannels = 3, 64, 256, 512, 1024, 2048;
    std::map<std::string, std::vector<int>> name2layers = getParams();
;TORCH_MODULE(UNet);

这是实现:

UNetImpl::UNetImpl(int _num_classes, std::string encoder_name, std::string pretrained_path, int encoder_depth,
                   std::vector<int> decoder_channels, bool use_attention)
    num_classes = _num_classes;
    std::vector<int> encoder_channels = BasicChannels;
    if(!name2layers.count(encoder_name)) throw "encoder name must in resnet18, resnet34, resnet50, resnet101";
    if(encoder_name!="resnet18" && encoder_name!="resnet34")
        encoder_channels = BottleChannels;
    

    encoder = pretrained_resnet(1000, encoder_name, pretrained_path);
    decoder = UNetDecoder(encoder_channels,decoder_channels, encoder_depth, use_attention, false);
    segmentation_head = SegmentationHead(decoder_channels[decoder_channels.size()-1], num_classes, 1, 1);

    register_module("encoder",encoder);
    register_module("decoder",decoder);
    register_module("segmentation_head",segmentation_head);


torch::Tensor UNetImpl::forward(torch::Tensor x)
    std::vector<torch::Tensor> features = encoder->features(x);
    x = decoder->forward(features);
    x = segmentation_head->forward(x);
    return x;

分割头:

class SegmentationHeadImpl: public torch::nn::Module
public:
    SegmentationHeadImpl(int in_channels, int out_channels, int kernel_size=3, double upsampling=1);
    torch::Tensor forward(torch::Tensor x);
private:
    torch::nn::Conv2d conv2dnullptr;
    torch::nn::Upsample upsamplingnullptr;
;TORCH_MODULE(SegmentationHead);

SegmentationHeadImpl::SegmentationHeadImpl(int in_channels, int out_channels, int kernel_size, double _upsampling)
    conv2d = torch::nn::Conv2d(conv_options(in_channels, out_channels, kernel_size, 1, kernel_size / 2));
    upsampling = torch::nn::Upsample(upsample_options(std::vector<double>_upsampling,_upsampling));
    register_module("conv2d",conv2d);

torch::Tensor SegmentationHeadImpl::forward(torch::Tensor x)
    x = conv2d->forward(x);
    x = upsampling->forward(x);
    return x;

内容过于多,博客写得比较费劲。直接将封装和测试代码放到GitHub上了,在这里。里面集成了包括ResNet,ResNext和可能的ResNest为骨干网络,目前网络架构实现了FPN,U-Net,PAN,LinkNet,DeepLabV3,DeepLabV3+。如果项目内容有帮到你请务必给个star,作者需要这份支持作为动力,实在没钱做推广呀...大家牛年快乐!!!

实际测试U-Net在c++代码执行效率,发现与python在cpu下速度一致,GPU下快35%+。c++真香。

分享不易,如果有用请不吝给我一个👍,转载注明出处:Allent's Blogs
代码见LibtorchTutorials

以上是关于libtorch(pytorch c++)教程的主要内容,如果未能解决你的问题,请参考以下文章

libtorch (pytorch c++) 教程

libtorch(pytorch c++)教程

libtorch(pytorch c++)教程

libtorch (pytorch c++) 教程

libtorch (pytorch c++) 教程

libtorch (pytorch c++) 教程