abaqus邓肯张模型umat

Posted zhubinglong

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了abaqus邓肯张模型umat相关的知识,希望对你有一定的参考价值。

首先是始点刚度法:

技术分享图片
  1       SUBROUTINE UMAT(STRESS,STATEV,DDSDDE,SSE,SPD,SCD,
  2      1 RPL,DDSDDT,DRPLDE,DRPLDT,
  3      2 STRAN,DSTRAN,TIME,DTIME,TEMP,DTEMP,PREDEF,DPRED,CMNAME,
  4      3 NDI,NSHR,NTENS,NSTATV,PROPS,NPROPS,COORDS,DROT,PNEWDT,
  5      4 CELENT,DFGRD0,DFGRD1,NOEL,NPT,LAYER,KSPT,JSTEP,KINC)
  6 C
  7       INCLUDE ABA_PARAM.INC
  8 C    始点刚度法
  9       CHARACTER*80 CMNAME
 10       DIMENSION STRESS(NTENS),STATEV(NSTATV),
 11      1 DDSDDE(NTENS,NTENS),DDSDDT(NTENS),DRPLDE(NTENS),
 12      2 STRAN(NTENS),DSTRAN(NTENS),TIME(2),PREDEF(1),DPRED(1),
 13      3 PROPS(NPROPS),COORDS(3),DROT(3,3),DFGRD0(3,3),DFGRD1(3,3),
 14      4 JSTEP(4)
 15     DIMENSION PS(3),DSTRESS(NTENS)
 16     PARAMETER (ONE=1.0D0,TWO=2.0D0,THREE=3.0D0,SIX=6.0D0)
 17 
 18       EK=PROPS(1)
 19     EN=PROPS(2)
 20     RF=PROPS(3)
 21     C=PROPS(4)
 22     FAI=PROPS(5)/180.0*3.1415926
 23     UG=PROPS(6)
 24     UD=PROPS(7)
 25     UF=PROPS(8)
 26     EKUR=PROPS(9)
 27     PA=PROPS(10)
 28     DFAI=PROPS(11)/180.0*3.1415926
 29     S1S3O=STATEV(1)
 30     S3O=STATEV(2)
 31     SSS=STATEV(3)
 32     CALL GETPS(STRESS,PS,NTENS)
 33    
 34     FAI=FAI-DFAI*LOG10(S3O/PA)
 35     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,UG,UD,UF
 36      1    ,SSS,S1S3O)
 37     EBULK3=EMOD/(ONE-TWO*ENU)
 38       EG2=EMOD/(ONE+ENU)
 39       EG=EG2/TWO
 40       EG3=THREE*EG
 41       ELAM=(EBULK3-EG2)/THREE
 42     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 43     DSTRESS=0.0
 44     CALL GETSTRESS(DDSDDE,DSTRESS,DSTRAN,NTENS)
 45       
 46     DO 701 I1=1,NTENS
 47     STRESS(I1)=STRESS(I1)+DSTRESS(I1)
 48 701    CONTINUE
 49     CALL GETPS(STRESS,PS,NTENS)
 50     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,UG,UD,UF,
 51      1    SSS,S1S3O)
 52     EBULK3=EMOD/(ONE-TWO*ENU)
 53       EG2=EMOD/(ONE+ENU)
 54       EG=EG2/TWO
 55       EG3=THREE*EG
 56       ELAM=(EBULK3-EG2)/THREE
 57     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 58     IF(PS(3).GT.S3O)S3O=PS(3)
 59      IF((PS(1)-PS(3)).GT.S1S3O)S1S3O=PS(1)-PS(3)
 60     IF(S.GT.SSS)SSS=S
 61     STATEV(1)=S1S3O
 62     STATEV(2)=S3O
 63     STATEV(3)=SSS
 64      END
 65         
 66     SUBROUTINE GETPS(STRESS,PS,NTENS)
 67     INCLUDE ABA_PARAM.INC
 68     DIMENSION PS(3),STRESS(NTENS)
 69     CALL SPRINC(STRESS,PS,1,3,3)
 70     DO 310 I=1,2
 71     DO 320 J=I+1,3
 72     IF(PS(I).GT.PS(J))THEN
 73     PPS=PS(I)
 74     PS(I)=PS(J)
 75     PS(J)=PPS
 76     END IF
 77 320    CONTINUE
 78 310    CONTINUE
 79     DO 330 K1=1,3
 80     PS(K1)=-PS(K1)
 81 330    CONTINUE
 82     RETURN
 83     END 
 84 
 85     SUBROUTINE GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O
 86      1    ,UG,UD,UF,SSS,S1S3O)
 87     INCLUDE ABA_PARAM.INC
 88     DIMENSION PS(3)
 89       S=(1-SIN(FAI))*(PS(1)-PS(3))
 90       IF(PS(3).LT.(-C/TAN(FAI))) THEN
 91           S=0.99
 92       ELSE
 93           
 94           S=S/(2*C*COS(FAI)+2*PS(3)*SIN(FAI))
 95           IF(S.GE.0.99)then
 96               S=0.99
 97             end if
 98           END IF
 99       EMOD=EK*PA*((S3O/PA)**EN)*((1-RF*S)**2)
100       
101       AA=UD*(PS(1)-PS(3))
102     AA=AA/(EK*PA*((S3O/PA)**EN))
103     AA=AA/(1-RF*S)
104     ENU=UG-UF*LOG10(S3O/PA)
105     ENU=ENU/(1-AA)/(1-AA)
106     IF(ENU.GT.0.49)ENU=0.49
107       IF(ENU.LT.0.05)ENU=0.05
108     IF(S.LT.SSS.AND.(PS(1)-PS(3)).LT.S1S3O)THEN
109     EMOD=EKUR*PA*((S3O/PA)**EN)
110       END IF
111     END 
112 
113 
114     SUBROUTINE GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
115     INCLUDE ABA_PARAM.INC
116     DIMENSION DDSDDE(NTENS,NTENS)
117     DO 20 K1=1,NTENS
118         DO 10 K2=1,NTENS
119            DDSDDE(K2,K1)=0.0
120  10     CONTINUE
121  20   CONTINUE
122       DO 40 K1=1,NDI
123         DO 30 K2=1,NDI
124            DDSDDE(K2,K1)=ELAM
125  30     CONTINUE
126         DDSDDE(K1,K1)=EG2+ELAM
127  40   CONTINUE
128       DO 50 K1=NDI+1,NTENS
129         DDSDDE(K1,K1)=EG
130  50   CONTINUE
131     RETURN
132     END
133 
134     SUBROUTINE GETSTRESS(DDSDDE,STRESS,DSTRAN,NTENS)
135     INCLUDE ABA_PARAM.INC
136     DIMENSION DDSDDE(NTENS,NTENS),STRESS(NTENS),DSTRAN(NTENS)
137     DO 70 K1=1,NTENS
138         DO 60 K2=1,NTENS
139            STRESS(K2)=STRESS(K2)+DDSDDE(K2,K1)*DSTRAN(K1)
140  60     CONTINUE
141  70   CONTINUE
142     RETURN
143     END
abaqus邓肯张umat始点刚度法

 

abaqus邓肯张umat中点刚度法:

技术分享图片
  1       SUBROUTINE UMAT(STRESS,STATEV,DDSDDE,SSE,SPD,SCD,
  2      1 RPL,DDSDDT,DRPLDE,DRPLDT,
  3      2 STRAN,DSTRAN,TIME,DTIME,TEMP,DTEMP,PREDEF,DPRED,CMNAME,
  4      3 NDI,NSHR,NTENS,NSTATV,PROPS,NPROPS,COORDS,DROT,PNEWDT,
  5      4 CELENT,DFGRD0,DFGRD1,NOEL,NPT,LAYER,KSPT,JSTEP,KINC)
  6 C
  7       INCLUDE ABA_PARAM.INC
  8 C     中点刚度法
  9       CHARACTER*80 CMNAME
 10       DIMENSION STRESS(NTENS),STATEV(NSTATV),
 11      1 DDSDDE(NTENS,NTENS),DDSDDT(NTENS),DRPLDE(NTENS),
 12      2 STRAN(NTENS),DSTRAN(NTENS),TIME(2),PREDEF(1),DPRED(1),
 13      3 PROPS(NPROPS),COORDS(3),DROT(3,3),DFGRD0(3,3),DFGRD1(3,3),
 14      4 JSTEP(4)
 15 
 16     DIMENSION PS(3),DSTRESS(NTENS),TDSTRESS(NTENS),TSTRESS(NTENS)
 17     PARAMETER (ONE=1.0D0,TWO=2.0D0,THREE=3.0D0,SIX=6.0D0)
 18 
 19       EK=PROPS(1)
 20     EN=PROPS(2)
 21     RF=PROPS(3)
 22     C=PROPS(4)
 23     FAI=PROPS(5)/180.0*3.1415926
 24     UG=PROPS(6)
 25     UD=PROPS(7)
 26     UF=PROPS(8)
 27     EKUR=PROPS(9)
 28     PA=PROPS(10)
 29     DFAI=PROPS(11)/180.0*3.1415926
 30     S1S3O=STATEV(1)
 31     S3O=STATEV(2)
 32     SSS=STATEV(3)
 33     CALL GETPS(STRESS,PS,NTENS)
 34     FAI=FAI-DFAI*LOG10(S3O/PA)
 35     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,UG,UD,UF
 36      1    ,SSS,S1S3O)
 37     EBULK3=EMOD/(ONE-TWO*ENU)
 38       EG2=EMOD/(ONE+ENU)
 39       EG=EG2/TWO
 40       EG3=THREE*EG
 41       ELAM=(EBULK3-EG2)/THREE
 42     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 43     TDSTRESS=0.0
 44     CALL GETSTRESS(DDSDDE,TDSTRESS,DSTRAN,NTENS)
 45     DO 701 I1=1,NTENS
 46     TSTRESS(I1)=STRESS(I1)+TDSTRESS(I1)*0.5
 47 701    CONTINUE
 48     
 49     CALL GETPS(TSTRESS,PS,NTENS)
 50     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,UG,UD,UF,
 51      1    SSS,S1S3O)
 52     EBULK3=EMOD/(ONE-TWO*ENU)
 53       EG2=EMOD/(ONE+ENU)
 54       EG=EG2/TWO
 55       EG3=THREE*EG
 56       ELAM=(EBULK3-EG2)/THREE
 57     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 58     DSTRESS=0.0
 59     CALL GETSTRESS(DDSDDE,DSTRESS,DSTRAN,NTENS)
 60     DO 702 I1=1,NTENS
 61      STRESS(I1)=STRESS(I1)+DSTRESS(I1)
 62 702    CONTINUE
 63      CALL GETPS(STRESS,PS,NTENS)
 64      CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,UG,UD,UF,
 65      1    SSS,S1S3O)
 66     EBULK3=EMOD/(ONE-TWO*ENU)
 67       EG2=EMOD/(ONE+ENU)
 68       EG=EG2/TWO
 69       EG3=THREE*EG
 70       ELAM=(EBULK3-EG2)/THREE
 71     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 72 
 73 
 74     IF(PS(3).GT.S3O)S3O=PS(3)
 75      IF((PS(1)-PS(3)).GT.S1S3O)S1S3O=PS(1)-PS(3)
 76     IF(S.GT.SSS)SSS=S
 77     STATEV(1)=S1S3O
 78     STATEV(2)=S3O
 79     STATEV(3)=SSS
 80 
 81     END
 82     
 83 
 84 
 85     SUBROUTINE GETPS(STRESS,PS,NTENS)
 86     INCLUDE ABA_PARAM.INC
 87     DIMENSION PS(3),STRESS(NTENS)
 88     CALL SPRINC(STRESS,PS,1,3,3)
 89     DO 310 I=1,2
 90     DO 320 J=I+1,3
 91     IF(PS(I).GT.PS(J))THEN
 92     PPS=PS(I)
 93     PS(I)=PS(J)
 94     PS(J)=PPS
 95     END IF
 96 320    CONTINUE
 97 310    CONTINUE
 98     DO 330 K1=1,3
 99     PS(K1)=-PS(K1)
100 330    CONTINUE
101     RETURN
102     END 
103 
104     SUBROUTINE GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O
105      1    ,UG,UD,UF,SSS,S1S3O)
106     INCLUDE ABA_PARAM.INC
107     DIMENSION PS(3)
108     S=(1-SIN(FAI))*(PS(1)-PS(3))
109     IF(PS(3).LT.(-C/TAN(FAI))) THEN
110           S=0.99
111         ELSE
112           S=S/(2*C*COS(FAI)+2*PS(3)*SIN(FAI))
113           IF(S.GE.0.99)S=0.99
114         END IF
115       EMOD=EK*PA*((S3O/PA)**EN)*((1-RF*S)**2)
116       AA=UD*(PS(1)-PS(3))
117     AA=AA/(EK*PA*((S3O/PA)**EN))
118     AA=AA/(1-RF*S)
119     ENU=UG-UF*LOG10(S3O/PA)
120     ENU=ENU/(1-AA)/(1-AA)
121     IF(ENU.GT.0.49)ENU=0.49
122       IF(ENU.LT.0.05)ENU=0.05
123     IF(S.LT.SSS.AND.(PS(1)-PS(3)).LT.S1S3O)THEN
124     EMOD=EKUR*PA*((S3O/PA)**EN)
125     END IF
126     END  
127 
128     SUBROUTINE GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
129     INCLUDE ABA_PARAM.INC
130     DIMENSION DDSDDE(NTENS,NTENS)
131     DO 20 K1=1,NTENS
132         DO 10 K2=1,NTENS
133            DDSDDE(K2,K1)=0.0
134  10     CONTINUE
135  20   CONTINUE
136       DO 40 K1=1,NDI
137         DO 30 K2=1,NDI
138            DDSDDE(K2,K1)=ELAM
139  30     CONTINUE
140         DDSDDE(K1,K1)=EG2+ELAM
141  40   CONTINUE
142       DO 50 K1=NDI+1,NTENS
143         DDSDDE(K1,K1)=EG
144  50   CONTINUE
145     RETURN
146     END
147 
148     SUBROUTINE GETSTRESS(DDSDDE,STRESS,DSTRAN,NTENS)
149     INCLUDE ABA_PARAM.INC
150     DIMENSION DDSDDE(NTENS,NTENS),STRESS(NTENS),DSTRAN(NTENS)
151     DO 70 K1=1,NTENS
152         DO 60 K2=1,NTENS
153            STRESS(K1)=STRESS(K1)+DDSDDE(K1,K2)*DSTRAN(K2)
154  60     CONTINUE
155  70   CONTINUE
156     RETURN
157     END
abaqus邓肯张umat中点刚度法

上面的是E-v模型。


 

 

 

abaqus邓肯张EB模型umat:

技术分享图片
  1         SUBROUTINE UMAT(STRESS,STATEV,DDSDDE,SSE,SPD,SCD,
  2      1 RPL,DDSDDT,DRPLDE,DRPLDT,
  3      2 STRAN,DSTRAN,TIME,DTIME,TEMP,DTEMP,PREDEF,DPRED,CMNAME,
  4      3 NDI,NSHR,NTENS,NSTATV,PROPS,NPROPS,COORDS,DROT,PNEWDT,
  5      4 CELENT,DFGRD0,DFGRD1,NOEL,NPT,LAYER,KSPT,JSTEP,KINC)
  6 C
  7       INCLUDE ABA_PARAM.INC
  8 C
  9       CHARACTER*80 CMNAME
 10       DIMENSION STRESS(NTENS),STATEV(NSTATV),
 11      1 DDSDDE(NTENS,NTENS),DDSDDT(NTENS),DRPLDE(NTENS),
 12      2 STRAN(NTENS),DSTRAN(NTENS),TIME(2),PREDEF(1),DPRED(1),
 13      3 PROPS(NPROPS),COORDS(3),DROT(3,3),DFGRD0(3,3),DFGRD1(3,3),
 14      4 JSTEP(4)
 15     DIMENSION PS(3),DSTRESS(NTENS)
 16     PARAMETER (ONE=1.0D0,TWO=2.0D0,THREE=3.0D0,SIX=6.0D0)
 17 
 18 
 19       EK=PROPS(1)
 20     EN=PROPS(2)
 21     RF=PROPS(3)
 22     C=PROPS(4)
 23     FAI=PROPS(5)/180.0*3.1415926
 24     DFAI=PROPS(6)/180.0*3.1415926
 25     EKB=PROPS(7)
 26     EM=PROPS(8)
 27     EKUR=PROPS(9)
 28     PA=PROPS(10)
 29     S1S3O=STATEV(1)
 30     S3O=STATEV(2)
 31     SSS=STATEV(3)
 32     
 33     CALL GETPS(STRESS,PS,NTENS)
 34     FAI=FAI-DFAI*LOG10(S3O/PA)
 35     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,EKB,EM
 36      1    ,SSS,S1S3O)
 37 
 38     EBULK3=EMOD/(ONE-TWO*ENU)
 39       EG2=EMOD/(ONE+ENU)
 40       EG=EG2/TWO
 41       EG3=THREE*EG
 42       ELAM=(EBULK3-EG2)/THREE
 43     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 44     DSTRESS=0.0
 45     CALL GETSTRESS(DDSDDE,DSTRESS,DSTRAN,NTENS)
 46     DO 701 I1=1,NTENS
 47     STRESS(I1)=STRESS(I1)+DSTRESS(I1)
 48 701    CONTINUE
 49     
 50     CALL GETPS(STRESS,PS,NTENS)
 51     
 52     CALL GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O,EKB,EM
 53      1    ,SSS,S1S3O)
 54 
 55 
 56     EBULK3=EMOD/(ONE-TWO*ENU)
 57       EG2=EMOD/(ONE+ENU)
 58       EG=EG2/TWO
 59       EG3=THREE*EG
 60       ELAM=(EBULK3-EG2)/THREE
 61     
 62     CALL GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
 63 
 64 
 65     IF(PS(3).GT.S3O)S3O=PS(3)
 66      IF((PS(1)-PS(3)).GT.S1S3O)S1S3O=PS(1)-PS(3)
 67     IF(S.GT.SSS)SSS=S
 68     STATEV(1)=S1S3O
 69     STATEV(2)=S3O
 70     STATEV(3)=SSS
 71 
 72     END
 73     
 74 
 75 
 76     SUBROUTINE GETPS(STRESS,PS,NTENS)
 77     INCLUDE ABA_PARAM.INC
 78     DIMENSION PS(3),STRESS(NTENS)
 79     CALL SPRINC(STRESS,PS,1,3,3)
 80     DO 310 I=1,2
 81     DO 320 J=I+1,3
 82     IF(PS(I).GT.PS(J))THEN
 83     PPS=PS(I)
 84     PS(I)=PS(J)
 85     PS(J)=PPS
 86     END IF
 87 320    CONTINUE
 88 310    CONTINUE
 89     DO 330 K1=1,3
 90     PS(K1)=-PS(K1)
 91 330    CONTINUE
 92     RETURN
 93     END 
 94 
 95     SUBROUTINE GETEMOD(PS,EK,EN,RF,C,FAI,ENU,PA,EKUR,EMOD,S,S3O
 96      1    ,EKB,EM,SSS,S1S3O)
 97 
 98     INCLUDE ABA_PARAM.INC
 99     DIMENSION PS(3)
100     
101        S=(1-SIN(FAI))*(PS(1)-PS(3))
102       IF(PS(3).LT.(-C/TAN(FAI))) THEN
103           S=0.99
104       ELSE
105           
106           S=S/(2*C*COS(FAI)+2*PS(3)*SIN(FAI))
107           IF(S.GE.0.99)then
108               S=0.99
109             END IF
110           END IF
111       EMOD=EK*PA*((S3O/PA)**EN)*((1-RF*S)**2)
112     IF((S.LT.SSS).AND.((PS(1)-PS(3)).LT.S1S3O))THEN
113     EMOD=EKUR*PA*((S3O/PA)**EN)
114     END IF
115 
116       AA=EKB*PA*((S3O/PA)**EM)
117     ENU=0.5*(1.0-EMOD/3./AA)
118     IF(ENU.GT.0.49)ENU=0.49
119     IF(ENU.LT.0.05)ENU=0.05
120     END 
121 
122 
123     SUBROUTINE GETDDSDDE(DDSDDE,NTENS,NDI,ELAM,EG2,EG)
124     INCLUDE ABA_PARAM.INC
125     DIMENSION DDSDDE(NTENS,NTENS)
126     DO 20 K1=1,NTENS
127         DO 10 K2=1,NTENS
128            DDSDDE(K2,K1)=0.0
129  10     CONTINUE
130  20   CONTINUE
131       DO 40 K1=1,NDI
132         DO 30 K2=1,NDI
133            DDSDDE(K2,K1)=ELAM
134  30     CONTINUE
135         DDSDDE(K1,K1)=EG2+ELAM
136  40   CONTINUE
137       DO 50 K1=NDI+1,NTENS
138         DDSDDE(K1,K1)=EG
139  50   CONTINUE
140     RETURN
141     END
142 
143     SUBROUTINE GETSTRESS(DDSDDE,STRESS,DSTRAN,NTENS)
144     INCLUDE ABA_PARAM.INC
145     DIMENSION DDSDDE(NTENS,NTENS),STRESS(NTENS),DSTRAN(NTENS)
146     DO 70 K1=1,NTENS
147         DO 60 K2=1,NTENS
148            STRESS(K2)=STRESS(K2)+DDSDDE(K2,K1)*DSTRAN(K1)
149  60     CONTINUE
150  70   CONTINUE
151     RETURN
152       END
153       
abaqus邓肯张EB模型UMAT

 

以上是关于abaqus邓肯张模型umat的主要内容,如果未能解决你的问题,请参考以下文章

abaqus的umat在vs中debug调试

链接 Abaqus/标准用户子程序的问题

abaqus二维模型怎么施加重力荷载,是对整个模型吗

abaqus里面如下图复杂的模型应该怎样划分网格啊?求高手指点。

abaqus 安装成功后打开主界面如下图所示,看不见模型,期待大神的帮助!

基于GMC/umat的复合材料宏细观渐近损伤分析