7基于 HA 机制的 Mycat 高可用--mycat

Posted 2021-03-09 mrchengs

在实际项目中，Mycat 服务也需要考虑高可用性，如果 Mycat 所在服务器出现宕机，或 Mycat 服

务故障，需要有备机提供服务，需要考虑 Mycat 集群。

 

1、 高可用方案

使用 HAProxy + Keepalived 配合两台 Mycat 搭起 Mycat 集群，实现高可用性。

HAProxy实现了 MyCat 多节点的集群高可用和负载均衡

HAProxy 自身的高可用则可以通过 Keepalived 来实现。

 

 

 

 

角色	ip
mycat01	192.168.199.217
mycat02	192.168.199.120
HA(主)	192.168.199.174
keepalive（主机）	192.168.199.174
HA(主)	192.168.199.199
keepalive（主机	192.168.199.199

 

先配置好mycat并且启动mycat

 

2 安装配置 HAProxy

1、 安装 HAProxy

 

 

2解压到/usr/local/src

 

3进入解压后的目录，查看内核版本，进行编译

[root@mycat05 software]# cd /usr/local/src/haproxy-1.5.18/
[root@mycat05 haproxy-1.5.18]# uname -r
3.10.0-957.el7.x86_64
[root@mycat05 haproxy-1.5.18]# make TARGET=linux310 PREFIX=/usr/local/haproxy ARCH=x86_64

# ARGET=linux310，内核版本，使用uname -r查看内核，如：3.10.0-957.el7，此时该参数就为linux310；

#ARCH=x86_64，系统位数；

#PREFIX=/usr/local/haprpxy #/usr/local/haprpxy，为haprpxy安装路径。

 

4编译完成后，进行安装

make install PREFIX=/usr/local/haproxy

 

5安装完成后，创建目录、创建HAProxy配置文件

mkdir -p /usr/data/haproxy/

vim /usr/local/haproxy/haproxy.conf

 

6向配置文件中插入以下配置信息,并保存

global
 log 127.0.0.1 local0
 #log 127.0.0.1 local1 notice
 #log loghost local0 info
 maxconn 4096
 chroot /usr/local/haproxy
 pidfile /usr/data/haproxy/haproxy.pid
 uid 99
 gid 99
 daemon
 #debug
 #quiet
defaults
 log global
 mode tcp
 option abortonclose
 option redispatch
 retries 3
 maxconn 2000
 timeout connect 5000
 timeout client 50000
 timeout server 50000
listen proxy_status 
bind :48066
 mode tcp
 balance roundrobin
 server mycat_1 192.168.140.128:8066 check inter 10s
 server mycat_2 192.168.140.127:8066 check inter 10s
frontend admin_stats 
bind :7777
 mode http
 stats enable
 option httplog
 maxconn 10
 stats refresh 30s
 stats uri /admin
 stats auth admin:123123 //登陆账户and密码
 stats hide-version
 stats admin if TRUE

 

2、 启动验证

1启动HAProxy

/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/haproxy.conf

 

2查看HAProxy进程

ps -ef|grep haproxy

 

3打开浏览器访问

http://192.168.199.174:7777/admin

 

 

如果Mycat主备机均已启动，则可以看到如下图

 

 

 

 

4验证负载均衡，通过HAProxy访问Mycat

在HAProxy主机上执行（192.168.199.174HA的主机地址）

[root@mycat05 haproxy-1.5.18]# mysql -umycat -p123456 -h 192.168.199.174 -P 48066

 

 

 

 

3 配置 Keepalived 

下载地址：https://www.keepalived.org/software/

1准备好Keepalived安装包，传到/opt目录下 

 

2解压到/usr/local/src

tar -zxvf keepalived-1.4.2.tar.gz -C /usr/local/src

 

3安装依赖插件

yum install -y gcc openssl-devel popt-devel

 

4进入解压后的目录，进行配置，进行编译

cd /usr/local/src/keepalived-1.4.2

./configure --prefix=/usr/local/keepalived

 

5进行编译，完成后进行安装

make && make install

 

 

6运行前配置

cp /usr/local/src/keepalived-1.4.2/keepalived/etc/init.d/keepalived /etc/init.d/

mkdir /etc/keepalived

cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

cp /usr/local/src/keepalived-1.4.2/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

cp /usr/local/keepalived/sbin/keepalived /usr/sbin/ 

 

7修改配置文件

vim /etc/keepalived/keepalived.conf 

#修改内容如下
! Configuration File for keepalived
global_defs {
 notification_email {
 [e-mail]
 }
 notification_email_from [e-mail]
 smtp_server 127.0.0.1
 smtp_connect_timeout 30
 router_id LVS_DEVEL
 vrrp_skip_check_adv_addr
 vrrp_garp_interval 0
 vrrp_gna_interval 0
}
vrrp_instance VI_1 {
 #主机配MASTER，备机配BACKUP
state MASTER
#所在机器网卡
 interface ens33
virtual_router_id 51
#数值越大优先级越高
 priority 100
 advert_int 1
 authentication {
 auth_type PASS
 auth_pass 1111
 }
virtual_ipaddress {
#虚拟IP
 192.168.199.111
 } }
virtual_server 192.168.199.111 48066 {
 delay_loop 6
 lb_algo rr
 lb_kind NAT
 persistence_timeout 50
 protocol TCP
 real_server 192.168.199.174 48066 { # HA的地址（主机）
 weight 1r
 TCP_CHECK {
 connect_timeout 3
 retry 3
 delay_before_retry 3
 } }
real_server 192.168.199.199 48600 {#HA地址（备机r）
 weight 1
 TCP_CHECK {
 connect_timeout 3
 nb_get_retry 3
 delay_before_retry 3
 }
 } }

 

8、启动Keepalived

同时启动备机上的HA

service keepalived start 

 

 

9、登录验证

mysql -umycat -p123456 -h 192.168.199.111 -P 48066 

192.168.199.111 ：虚拟ip

 

 

 

 

此时是：

HA隐藏mycat的ip

KeepAlive隐藏HA的ip

 

4 测试高可用 

1关闭mycat 

 

 

2通过虚拟ip查询数据

mysql -umycat -p123456 -h 192.168.199.111 -P 48066 

 

mysql> select * from orders;
ERROR 2013 (HY000): Lost connection to MySQL server during query


mysql> select * from orders;
ERROR 2006 (HY000): MySQL server has gone away
No connection. Trying to reconnect...
Connection id:    2
Current database: TESTDB

+--------+------------+-------------+-----------+
| id     | order_type | customer_id | amount    |
+--------+------------+-------------+-----------+
|      1 |        101 |         100 | 100100.00 |
|      2 |        101 |         100 | 100300.00 |
|      6 |        102 |         100 | 100020.00 |
|      3 |        101 |         101 | 120000.00 |
|      4 |        101 |         101 | 103000.00 |
|      5 |        102 |         101 | 100400.00 |
| 400100 |        102 |         101 |   1000.00 |
| 400101 |        102 |         101 |   1000.00 |
+--------+------------+-------------+-----------+
8 rows in set (1.46 sec)