STMS issue
Posted weikui
tags:
篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了STMS issue相关的知识,希望对你有一定的参考价值。
Component: BC-CTS-TMS
当装完系统,STMS第一次进入系统,就报错
The TMS configuration is inconsistent
then check the TMS alert viewer:
Message SET_CODEPAGE_FAILED
Could not start transport control program tp
具体的报错 Errors during distribution of tp configuration
Message no. XT454 Diagnosis The tp configuration could not be distributed. System Response The function terminates. Procedure You can find a detailed error message in the TMS Alert Viewer (see TMS Alert Viewer). Remove the cause of the error and execute the command again.
yongxiang Fang-08.04.2020 12:03:16
Could not start transport control program tp Message no. TP608 Diagnosis There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here. Error code: 4 RFC error text: timeout during allocate / CPIC-CALL: ‘ThSAPCMRCV‘, Meaning of the error codes: 03 RFC system failure 04 RFC communication failure System Response The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW). Procedure Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
|
Solution:
set the profile parameter "rfc/use_gwstart = 1"
2173569 - Error when opening an RFC connection
以上是关于STMS issue的主要内容,如果未能解决你的问题,请参考以下文章