Do you (really) write exception safe code?

Posted kimbing-ng

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了Do you (really) write exception safe code?相关的知识,希望对你有一定的参考价值。

原文

https://stackoverflow.com/questions/1853243/do-you-really-write-exception-safe-code
https://en.cppreference.com/w/cpp/language/exceptions#Exception_safety


Exception handling provides a way of transferring control and information from some point in the execution of a program to a handler associated with a point previously passed by the execution (in other words, exception handling transfers control up the call stack)

An exception can be thrown by a throw-expression, dynamic_cast, typeid, new-expression, allocation function, and any of the standard library functions that are specified to throw exceptions to signal certain error conditions (e.g. std::vector::at, std::string::substr, etc).

In order for an exception to be caught, the throw-expression has to be inside a try-block or inside a function called from a try-block, and there has to be a catch clause that matches the type of the exception object.

When declaring a function, exception specifications and noexcept specifiers may be provided to limit the types of the exceptions a function may throw.

Errors that arise during exception handling are handled by std::terminate and std::unexpected (until C++17).

Contents

 [hide

[edit] Usage

While throw-expression can be used to transfer control to an arbitrary block of code up the execution stack, for arbitrary reasons (similar to std::longjmp), its intended usage is error handling.

[edit] Error handling

Throwing an exception is used to signal errors from functions, where "errors" are typically limited to only the following[1][2][3]:

  1. Failures to meet the postconditions, such as failing to produce a valid return value object
  2. Failures to meet the preconditions of another function that must be called
  3. (for non-private member functions) Failures to (re)establish a class invariant

In particular, this implies that the failures of constructors (see also RAII) and most operators should be reported by throwing exceptions.

In addition, so-called wide contract functions use exceptions to indicate unacceptable inputs, for example, std::string::at has no preconditions, but throws an exception to indicate index out of range.

[edit] Exception safety

After the error condition is reported by a function, additional guarantees may be provided with regards to the state of the program. The following four levels of exception guarantee are generally recognized[4][5][6], which are strict supersets of each other:

  1. Nothrow (or nofail) exception guarantee -- the function never throws exceptions. Nothrow (errors are reported by other means or concealed) is expected of destructors and other functions that may be called during stack unwinding. The destructors are noexcept by default. (since C++11) Nofail (the function always succeeds) is expected of swaps, move constructors, and other functions used by those that provide strong exception guarantee.
  2. Strong exception guarantee -- If the function throws an exception, the state of the program is rolled back to the state just before the function call. (for example, std::vector::push_back)
  3. Basic exception guarantee -- If the function throws an exception, the program is in a valid state. No resources are leaked, and all objects‘ invariants are intact.
  4. No exception guarantee -- If the function throws an exception, the program may not be in a valid state: resource leaks, memory corruption, or other invariant-destroying errors may have occurred.

Generic components may, in addition, offer exception-neutral guarantee: if an exception is thrown from a template parameter (e.g. from the Compare function object of std::sort or from the constructor of T in std::make_shared), it is propagated, unchanged, to the caller.

[edit] Exception objects

While objects of any complete type and cv pointers to void may be thrown as exception objects, all standard library functions throw anonymous temporary objects by value, and the types of those objects are derived (directly or indirectly) from std::exception. User-defined exceptions usually follow this pattern.[7][8][9]

To avoid unnecessary copying of the exception object and object slicing, the best practice for catch clauses is to catch by reference.[10][11][12][13]

[edit] References

  1. H. Sutter (2004) "When and How to Use Exceptions" in Dr. Dobb‘s
  2. H.Sutter, A. Alexandrescu (2004), "C++ Coding Standards", Item 70
  3. C++ Core Guidelines I.10
  4. B. Stroustrup (2000), "The C++ Programming Language"Appendix E"
  5. H. Sutter (2000) "Exceptional C++"
  6. D. Abrahams (2001) "Exception Safety in Generic Components"
  7. D. Abrahams (2001) "Error and Exception Handling"
  8. isocpp.org Super-FAQ "What should I throw?"
  9. C++ Core Guidelines E.14
  10. C++ Core Guidelines E.15
  11. S. Meyers (1996) "More Effective C++" Item 13
  12. isocpp.org Super-FAQ "What should I catch?"
  13. H.Sutter, A. Alexandrescu (2004) "C++ Coding Standards" Item 73



Exception handling (EH) seems to be the current standard, and by searching the web, I can not find any novel ideas or methods that try to improve or replace it (well, some variations exist, but nothing novel).

Though most people seem to ignore it or just accept it, EH has some huge drawbacks: exceptions are invisible to the code and it creates many, many possible exit points. Joel on software wrote an article about it. The comparison to goto fits perfect, it made me think again about EH.

I try to avoid EH and just use return values, callbacks or whatever fits the purpose. But when you have to write reliable code, you just can‘t ignore EH these days: It starts with the new, which may throw an exception, instead of just returning 0 (like in the old days). This makes about any line of C++ code vulnerable to an exception. And then more places in the C++ foundational code throw exceptions... std lib does it, and so on.

This feels like walking on shaky grounds.. So, now we are forced to take care about exceptions!

But its hard, its really hard. You have to learn to write exception safe code, and even if you have some experience with it, it will still be required to double check any single line of code to be safe! Or you start to put try/catch blocks everywhere, which clutters the code until it reaches a state of unreadability.

EH replaced the old clean deterministical approach (return values..), which had just a few but understandable and easily solveable drawbacks with an approach that creates many possible exit points in your code, and if you start writing code that catches exceptions (what you are forced to do at some point), then it even creates a multitude of paths through your code (code in the catch blocks, think about a server program where you need logging facilities other than std::cerr ..). EH has advantages, but that‘s not the point.

My actual questions:

  • Do you really write exception safe code?
  • Are you sure your last "production ready" code is exception safe?
  • Can you even be sure, that it is?
  • Do you know and/or actually use alternatives that work?


Your question makes an assertion, that "Writing exception-safe code is very hard". I will answer your questions first, and then, answer the hidden question behind them.

Answering questions

Do you really write exception safe code?

Of course, I do.

This is the reason Java lost a lot of its appeal to me as a C++ programmer (lack of RAII semantics), but I am digressing: This is a C++ question.

It is, in fact, necessary when you need to work with STL or Boost code. For example, C++ threads (boost::thread or std::thread) will throw an exception to exit gracefully.

Are you sure your last "production ready" code is exception safe?

Can you even be sure, that it is?

Writing exception-safe code is like writing bug-free code.

You can‘t be 100% sure your code is exception safe. But then, you strive for it, using well-known patterns, and avoiding well-known anti-patterns.

Do you know and/or actually use alternatives that work?

There are no viable alternatives in C++ (i.e. you‘ll need to revert back to C and avoid C++ libraries, as well as external surprises like Windows SEH).

Writing exception safe code

To write exception safe code, you must know first what level of exception safety each instruction you write is.

For example, a new can throw an exception, but assigning a built-in (e.g. an int, or a pointer) won‘t fail. A swap will never fail (don‘t ever write a throwing swap), a std::list::push_back can throw...

Exception guarantee

The first thing to understand is that you must be able to evaluate the exception guarantee offered by all of your functions:

  1. none: Your code should never offer that. This code will leak everything, and break down at the very first exception thrown.
  2. basic: This is the guarantee you must at the very least offer, that is, if an exception is thrown, no resources are leaked, and all objects are still whole
  3. strong: The processing will either succeed, or throw an exception, but if it throws, then the data will be in the same state as if the processing had not started at all (this gives a transactional power to C++)
  4. nothrow/nofail: The processing will succeed.

Example of code

The following code seems like correct C++, but in truth, offers the "none" guarantee, and thus, it is not correct:

void doSomething(T & t)
{
   if(std::numeric_limits<int>::max() > t.integer)  // 1.   nothrow/nofail
      t.integer += 1 ;                              // 1‘.  nothrow/nofail
   X * x = new X() ;                // 2. basic : can throw with new and X constructor
   t.list.push_back(x) ;            // 3. strong : can throw
   x->doSomethingThatCanThrow() ;   // 4. basic : can throw
}

I write all my code with this kind of analysis in mind.

The lowest guarantee offered is basic, but then, the ordering of each instruction makes the whole function "none", because if 3. throws, x will leak.

The first thing to do would be to make the function "basic", that is putting x in a smart pointer until it is safely owned by the list:

void doSomething(T & t)
{
   if(std::numeric_limits<int>::max() > t.integer)  // 1.   nothrow/nofail
      t.integer += 1 ;                              // 1‘.  nothrow/nofail
   std::auto_ptr<X> x(new X()) ;    // 2.  basic : can throw with new and X constructor
   X * px = x.get() ;               // 2‘. nothrow/nofail
   t.list.push_back(px) ;           // 3.  strong : can throw
   x.release() ;                    // 3‘. nothrow/nofail
   px->doSomethingThatCanThrow() ;  // 4.  basic : can throw
}

Now, our code offers a "basic" guarantee. Nothing will leak, and all objects will be in a correct state. But we could offer more, that is, the strong guarantee. This is where it can become costly, and this is why not all C++ code is strong. Let‘s try it:

void doSomething(T & t)
{
   // we create "x"
   std::auto_ptr<X> x(new X()) ;    // 1. basic : can throw with new and X constructor
   X * px = x.get() ;               // 2. nothrow/nofail
   px->doSomethingThatCanThrow() ;  // 3. basic : can throw

   // we copy the original container to avoid changing it
   T t2(t) ;                        // 4. strong : can throw with T copy-constructor

   // we put "x" in the copied container
   t2.list.push_back(px) ;          // 5. strong : can throw
   x.release() ;                    // 6. nothrow/nofail
   if(std::numeric_limits<int>::max() > t2.integer)  // 7.   nothrow/nofail
      t2.integer += 1 ;                              // 7‘.  nothrow/nofail

   // we swap both containers
   t.swap(t2) ;                     // 8. nothrow/nofail
}

We re-ordered the operations, first creating and setting X to its right value. If any operation fails, then t is not modified, so, operation 1 to 3 can be considered "strong": If something throws, t is not modified, and X will not leak because it‘s owned by the smart pointer.

Then, we create a copy t2 of t, and work on this copy from operation 4 to 7. If something throws, t2 is modified, but then, t is still the original. We still offer the strong guarantee.

Then, we swap t and t2. Swap operations should be nothrow in C++, so let‘s hope the swap you wrote for T is nothrow (if it isn‘t, rewrite it so it is nothrow).

So, if we reach the end of the function, everything succeeded (No need of a return type) and t has its excepted value. If it fails, then t has still its original value.

Now, offering the strong guarantee could be quite costly, so don‘t strive to offer the strong guarantee to all your code, but if you can do it without a cost (and C++ inlining and other optimization could make all the code above costless), then do it. The function user will thank you for it.

Conclusion

It takes some habit to write exception-safe code. You‘ll need to evaluate the guarantee offered by each instruction you‘ll use, and then, you‘ll need to evaluate the guarantee offered by a list of instructions.

Of course, the C++ compiler won‘t back up the guarantee (in my code, I offer the guarantee as a @warning doxygen tag), which is kinda sad, but it should not stop you from trying to write exception-safe code.

Normal failure vs. bug

How can a programmer guarantee that a no-fail function will always succeed? After all, the function could have a bug.

This is true. The exception guarantees are supposed to be offered by bug-free code. But then, in any language, calling a function supposes the function is bug-free. No sane code protects itself against the possibility of it having a bug. Write code the best you can, and then, offer the guarantee with the supposition it is bug-free. And if there is a bug, correct it.

Exceptions are for exceptional processing failure, not for code bugs.

Last words

Now, the question is "Is this worth it ?".

Of course, it is. Having a "nothrow/no-fail" function knowing that the function won‘t fail is a great boon. The same can be said for a "strong" function, which enables you to write code with transactional semantics, like databases, with commit/rollback features, the commit being the normal execution of the code, throwing exceptions being the rollback.

Then, the "basic" is the very least guarantee you should offer. C++ is a very strong language there, with its scopes, enabling you to avoid any resource leaks (something a garbage collector would find it difficult to offer for the database, connection or file handles).

So, as far as I see it, it is worth it.

Edit 2010-01-29: About non-throwing swap

nobar made a comment that I believe, is quite relevant, because it is part of "how do you write exception safe code":

  • [me] A swap will never fail (don‘t even write a throwing swap)
  • [nobar] This is a good recommendation for custom-written swap() functions. It should be noted, however, that std::swap() can fail based on the operations that it uses internally

the default std::swap will make copies and assignments, which, for some objects, can throw. Thus, the default swap could throw, either used for your classes or even for STL classes. As far as the C++ standard is concerned, the swap operation for vector, deque, and list won‘t throw, whereas it could for map if the comparison functor can throw on copy construction (See The C++ Programming Language, Special Edition, appendix E, E.4.3.Swap).

Looking at Visual C++ 2008 implementation of the vector‘s swap, the vector‘s swap won‘t throw if the two vectors have the same allocator (i.e., the normal case), but will make copies if they have different allocators. And thus, I assume it could throw in this last case.

So, the original text still holds: Don‘t ever write a throwing swap, but nobar‘s comment must be remembered: Be sure the objects you‘re swapping have a non-throwing swap.

Edit 2011-11-06: Interesting article

Dave Abrahams, who gave us the basic/strong/nothrow guarantees, described in an article his experience about making the STL exception safe:

http://www.boost.org/community/exception_safety.html

Look at the 7th point (Automated testing for exception-safety), where he relies on automated unit testing to make sure every case is tested. I guess this part is an excellent answer to the question author‘s "Can you even be sure, that it is?".

Edit 2013-05-31: Comment from dionadar

t.integer += 1; is without the guarantee that overflow will not happen NOT exception safe, and in fact may technically invoke UB! (Signed overflow is UB: C++11 5/4 "If during the evaluation of an expression, the result is not mathematically defined or not in the range of representable values for its type, the behavior is undefined.") Note that unsigned integer do not overflow, but do their computations in an equivalence class modulo 2^#bits.

Dionadar is referring to the following line, which indeed has undefined behaviour.

   t.integer += 1 ;                 // 1. nothrow/nofail

The solution here is to verify if the integer is already at its max value (using std::numeric_limits<T>::max()) before doing the addition.

My error would go in the "Normal failure vs. bug" section, that is, a bug. It doesn‘t invalidate the reasoning, and it does not mean the exception-safe code is useless because impossible to attain. You can‘t protect yourself against the computer switching off, or compiler bugs, or even your bugs, or other errors. You can‘t attain perfection, but you can try to get as near as possible.

I corrected the code with Dionadar‘s comment in mind.

以上是关于Do you (really) write exception safe code?的主要内容,如果未能解决你的问题,请参考以下文章

[2016-05-19]OMG美语笔记-Do you have a pet who is really great companion?

[2016-3-10]OMG美语每日笔记-Do you have a place that you really wanna visit on the top of your bucket list?

[2016-05-18]OMG美语笔记-Do you like loose curls?What do you do to hold curl in your hair?

[2016-05-25]OMG美语笔记-Have you ever felt like you had fever and you're burning up like really,real

前端:从 URL 输入到页面展现发生了什么?(What really happens when you navigate to a URL)

[2016-3-18]OMG美语每日笔记-Hava you ever felt so devastated after not being chosen by a club you really wa