Read Audi ELV/ESL HC908GR16 with Xprog ECU Programmer

Posted 2021-02-12 aid12580

ELV AUDI MC68H908GR16 mcu read by Xprog or VVDI Prog, which is faster?

 

1)Read 908GR16 with Xprog

Require xprog version newer than 5.70 (Xprog v5.70, 5.74, 5.84)

Connect ELV 908GR16 mcu with Xprog via HC(S)12 BDM adapter

In Xprog-m software, select Freescale MCU MC68H908GR16_FLASH+ security

select Read Security Bytes

Bypass security

Xprog m read security byte success, press OK to continue

Go to Options tab->Environment->Device->Manual

Manully enter security bytes

Read 908GR16 in process

Verify device

Read data success

Save data.

Reading procedure takes 1 minute and 59 seconds

 

 

2) Read 908GR16 with Xhorse VVDI Prog

Follow wiring diagram to connect VVDI prog with ESL

In VVDIProg software, select Audi ESL HC08GR16 V1

Read data

Verify data

Save data

Reading process takes 2 minutes.

 

 

In conclusion:

Xprog is cheaper and faster than VVDIProg in Audi ELV 908GR16 reading.

 

This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc.