06mycat使用haproxy进行负载均衡

Posted reblue520

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了06mycat使用haproxy进行负载均衡相关的知识,希望对你有一定的参考价值。

技术分享图片

集群的服务器列表

技术分享图片

在10.11.0.210和10.11.0.216中部署mycat和haproxy(因为实验机器性能有限,实际生产环境中需要单独用服务做haproxy反向代理)

 

两台机器的Mycat配置和haproxy保持一致

即 haproxy à mycat à pxc集群 à mysql分片

 

Mycat的相关配置

Server.xml

[[email protected] mycat]# cat conf/server.xml 
<?xml version="1.0" encoding="UTF-8"?>
<!-- - - Licensed under the Apache License, Version 2.0 (the "License"); 
    - you may not use this file except in compliance with the License. - You 
    may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 
    - - Unless required by applicable law or agreed to in writing, software - 
    distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT 
    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the 
    License for the specific language governing permissions and - limitations 
    under the License. -->
<!DOCTYPE mycat:server SYSTEM "server.dtd">
<mycat:server xmlns:mycat="http://io.mycat/">
    <system>
    <property name="nonePasswordLogin">0</property> <!-- 0为需要密码登陆、1为不需要密码登陆 ,默认为0,设置为1则需要指定默认账户-->
    <property name="useHandshakeV10">1</property>
    <property name="useSqlStat">0</property>  <!-- 1为开启实时统计、0为关闭 -->
    <property name="useGlobleTableCheck">0</property>  <!-- 1为开启全加班一致性检测、0为关闭 -->

        <property name="sequnceHandlerType">2</property>
    <property name="subqueryRelationshipCheck">false</property> <!-- 子查询中存在关联查询的情况下,检查关联字段中是否有分片字段 .默认 false -->
      <!--  <property name="useCompression">1</property>--> <!--1为开启mysql压缩协议-->
        <!--  <property name="fakeMySQLVersion">5.6.20</property>--> <!--设置模拟的MySQL版本号-->
    <!-- <property name="processorBufferChunk">40960</property> -->
    <!-- 
    <property name="processors">1</property> 
    <property name="processorExecutor">32</property> 
     -->
        <!--默认为type 0: DirectByteBufferPool | type 1 ByteBufferArena | type 2 NettyBufferPool -->
        <property name="processorBufferPoolType">0</property>
        <!--默认是65535 64K 用于sql解析时最大文本长度 -->
        <!--<property name="maxStringLiteralLength">65535</property>-->
        <!--<property name="sequnceHandlerType">0</property>-->
        <!--<property name="backSocketNoDelay">1</property>-->
        <!--<property name="frontSocketNoDelay">1</property>-->
        <!--<property name="processorExecutor">16</property>-->
        <!--
            <property name="serverPort">8066</property> <property name="managerPort">9066</property> 
            <property name="idleTimeout">300000</property> <property name="bindIp">0.0.0.0</property> 
            <property name="frontWriteQueueSize">4096</property> <property name="processors">32</property> -->
        <!--分布式事务开关,0为不过滤分布式事务,1为过滤分布式事务(如果分布式事务内只涉及全局表,则不过滤),2为不过滤分布式事务,但是记录分布式事务日志-->
        <property name="handleDistributedTransactions">0</property>
        
            <!--
            off heap for merge/order/group/limit      1开启   0关闭
        -->
        <property name="useOffHeapForMerge">1</property>

        <!--
            单位为m
        -->
        <property name="memoryPageSize">64k</property>

        <!--
            单位为k
        -->
        <property name="spillsFileBufferSize">1k</property>

        <property name="useStreamOutput">0</property>

        <!--
            单位为m
        -->
        <property name="systemReserveMemorySize">384m</property>


        <!--是否采用zookeeper协调切换  -->
        <property name="useZKSwitch">false</property>

        <!-- XA Recovery Log日志路径 -->
        <!--<property name="XARecoveryLogBaseDir">./</property>-->

        <!-- XA Recovery Log日志名称 -->
        <!--<property name="XARecoveryLogBaseName">tmlog</property>-->

    </system>
    
    <!-- 全局SQL防火墙设置 -->
    <!--白名单可以使用通配符%或着*-->
    <!--例如<host host="127.0.0.*" user="root"/>-->
    <!--例如<host host="127.0.*" user="root"/>-->
    <!--例如<host host="127.*" user="root"/>-->
    <!--例如<host host="1*7.*" user="root"/>-->
    <!--这些配置情况下对于127.0.0.1都能以root账户登录-->
    <!--
    <firewall>
       <whitehost>
          <host host="1*7.0.0.*" user="root"/>
       </whitehost>
       <blacklist check="false">
       </blacklist>
    </firewall>
    -->

    <user name="admin" defaultAccount="true">
        <property name="password">Abc_123456</property>
        <property name="schemas">chinasoft</property>
        
        <!-- 表级 DML 权限设置 -->
        <!--         
        <privileges check="false">
            <schema name="TESTDB" dml="0110" >
                <table name="tb01" dml="0000"></table>
                <table name="tb02" dml="1111"></table>
            </schema>
        </privileges>        
         -->
    </user>

    <user name="user">
        <property name="password">user</property>
        <property name="schemas">chinasoft</property>
        <property name="readOnly">true</property>
    </user>

</mycat:server>

Schame.xml

[[email protected] mycat]# cat conf/schema.xml 
<?xml version="1.0"?>
<!DOCTYPE mycat:schema SYSTEM "schema.dtd">
<mycat:schema xmlns:mycat="http://io.mycat/">
    <!-- 配置数据表 -->
    <schema name="chinasoft" checkSQLschema="false" sqlMaxLimit="100">
        <table name="t_user" dataNode="dn1,dn2" rule="mod-long" />
        <table name="t_customer" dataNode="dn1,dn2" rule="sharding-customer">
            <!-- 配置父子表 -->
            <childTable name="t_orders" primaryKey="ID" joinKey="customer_id" parentKey="id">
            </childTable>
        </table>
    </schema>
    <!-- 配置分配关系 -->
    <dataNode name="dn1" dataHost="pxc-cluster" database="chinasoft" />
    <dataNode name="dn2" dataHost="pxc-cluster02" database="chinasoft" />
    <!-- 配置连接关系 pxc-cluster-->
    <dataHost name="pxc-cluster" maxCon="1000" minCon="10" balance="2"
              writeType="1" dbType="mysql" dbDriver="native" switchType="1"  slaveThreshold="100">
        <heartbeat>select user()</heartbeat>
        <writeHost host="W1" url="10.11.0.210:3306" user="admin"
                   password="Abc_123456">
            <readHost host="W1R1" url="10.11.0.212:3306" user="admin" password="Abc_123456" />
            <readHost host="W1R2" url="10.11.0.215:3306" user="admin" password="Abc_123456" />
        </writeHost>
        <writeHost host="W2" url="10.11.0.212:3306" user="admin"
                   password="Abc_123456">
            <readHost host="W2R1" url="10.11.0.210:3306" user="admin" password="Abc_123456" />
            <readHost host="W2R2" url="10.11.0.215:3306" user="admin" password="Abc_123456" />
        </writeHost>
    </dataHost>

    <!-- 配置连接关系 pxc-cluster02-->
    <dataHost name="pxc-cluster02" maxCon="1000" minCon="10" balance="2"
              writeType="1" dbType="mysql" dbDriver="native" switchType="1"  slaveThreshold="100">
        <heartbeat>select user()</heartbeat>
        <writeHost host="W1" url="10.11.0.216:3306" user="admin"
                   password="Abc_123456">
            <readHost host="W1R1" url="10.11.0.217:3306" user="admin" password="Abc_123456" />
            <readHost host="W1R2" url="10.11.0.218:3306" user="admin" password="Abc_123456" />
        </writeHost>
        <writeHost host="W2" url="10.11.0.217:3306" user="admin"
                   password="Abc_123456">
            <readHost host="W2R1" url="10.11.0.216:3306" user="admin" password="Abc_123456" />
            <readHost host="W2R2" url="10.11.0.218:3306" user="admin" password="Abc_123456" />
        </writeHost>
    </dataHost>

</mycat:schema>

Rule.xml

[[email protected] mycat]# cat conf/rule.xml 
<?xml version="1.0" encoding="UTF-8"?>
<!-- - - Licensed under the Apache License, Version 2.0 (the "License"); 
    - you may not use this file except in compliance with the License. - You 
    may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 
    - - Unless required by applicable law or agreed to in writing, software - 
    distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT 
    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the 
    License for the specific language governing permissions and - limitations 
    under the License. -->
<!DOCTYPE mycat:rule SYSTEM "rule.dtd">
<mycat:rule xmlns:mycat="http://io.mycat/">
    <tableRule name="rule1">
        <rule>
            <columns>id</columns>
            <algorithm>func1</algorithm>
        </rule>
    </tableRule>

    <tableRule name="rule2">
        <rule>
            <columns>user_id</columns>
            <algorithm>func1</algorithm>
        </rule>
    </tableRule>

    <tableRule name="sharding-by-intfile">
        <rule>
            <columns>sharding_id</columns>
            <algorithm>hash-int</algorithm>
        </rule>
    </tableRule>

    <tableRule name="sharding-customer">
        <rule>
            <columns>sharding_id</columns>
            <algorithm>customer-hash-int</algorithm>
        </rule>
    </tableRule>

    <tableRule name="auto-sharding-long">
        <rule>
            <columns>id</columns>
            <algorithm>rang-long</algorithm>
        </rule>
    </tableRule>
    <tableRule name="mod-long">
        <rule>
            <columns>id</columns>
            <algorithm>mod-long</algorithm>
        </rule>
    </tableRule>
    <tableRule name="sharding-by-murmur">
        <rule>
            <columns>id</columns>
            <algorithm>murmur</algorithm>
        </rule>
    </tableRule>
    <tableRule name="crc32slot">
        <rule>
            <columns>id</columns>
            <algorithm>crc32slot</algorithm>
        </rule>
    </tableRule>
    <tableRule name="sharding-by-month">
        <rule>
            <columns>create_time</columns>
            <algorithm>partbymonth</algorithm>
        </rule>
    </tableRule>
    <tableRule name="latest-month-calldate">
        <rule>
            <columns>calldate</columns>
            <algorithm>latestMonth</algorithm>
        </rule>
    </tableRule>
    
    <tableRule name="auto-sharding-rang-mod">
        <rule>
            <columns>id</columns>
            <algorithm>rang-mod</algorithm>
        </rule>
    </tableRule>
    
    <tableRule name="jch">
        <rule>
            <columns>id</columns>
            <algorithm>jump-consistent-hash</algorithm>
        </rule>
    </tableRule>

    <function name="murmur"
        class="io.mycat.route.function.PartitionByMurmurHash">
        <property name="seed">0</property><!-- 默认是0 -->
        <property name="count">2</property><!-- 要分片的数据库节点数量,必须指定,否则没法分片 -->
        <property name="virtualBucketTimes">160</property><!-- 一个实际的数据库节点被映射为这么多虚拟节点,默认是160倍,也就是虚拟节点数是物理节点数的160倍 -->
        <!-- <property name="weightMapFile">weightMapFile</property> 节点的权重,没有指定权重的节点默认是1。以properties文件的格式填写,以从0开始到count-1的整数值也就是节点索引为key,以节点权重值为值。所有权重值必须是正整数,否则以1代替 -->
        <!-- <property name="bucketMapPath">/etc/mycat/bucketMapPath</property> 
            用于测试时观察各物理节点与虚拟节点的分布情况,如果指定了这个属性,会把虚拟节点的murmur hash值与物理节点的映射按行输出到这个文件,没有默认值,如果不指定,就不会输出任何东西 -->
    </function>

    <function name="crc32slot"
              class="io.mycat.route.function.PartitionByCRC32PreSlot">
        <property name="count">2</property><!-- 要分片的数据库节点数量,必须指定,否则没法分片 -->
    </function>
    <function name="hash-int"
        class="io.mycat.route.function.PartitionByFileMap">
        <property name="mapFile">partition-hash-int.txt</property>
    </function>

    <function name="customer-hash-int"
        class="io.mycat.route.function.PartitionByFileMap">
        <property name="mapFile">customer-hash-int.txt</property>
    </function>

    <function name="rang-long"
        class="io.mycat.route.function.AutoPartitionByLong">
        <property name="mapFile">autopartition-long.txt</property>
    </function>



    <function name="mod-long" class="io.mycat.route.function.PartitionByMod">
        <!-- how many data nodes -->
        <property name="count">2</property>
    </function>

    <function name="func1" class="io.mycat.route.function.PartitionByLong">
        <property name="partitionCount">8</property>
        <property name="partitionLength">128</property>
    </function>
    <function name="latestMonth"
        class="io.mycat.route.function.LatestMonthPartion">
        <property name="splitOneDay">24</property>
    </function>
    <function name="partbymonth"
        class="io.mycat.route.function.PartitionByMonth">
        <property name="dateFormat">yyyy-MM-dd</property>
        <property name="sBeginDate">2015-01-01</property>
    </function>
    
    <function name="rang-mod" class="io.mycat.route.function.PartitionByRangeMod">
            <property name="mapFile">partition-range-mod.txt</property>
    </function>
    
    <function name="jump-consistent-hash" class="io.mycat.route.function.PartitionByJumpConsistentHash">
        <property name="totalBuckets">3</property>
    </function>
</mycat:rule>

Haproxy的配置

[[email protected] mycat]# cat /etc/haproxy/haproxy.cfg 
global
    log         127.0.0.1 local2
    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon
    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

defaults
    mode                    http
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

listen   admin_stats  
    bind    0.0.0.0:4001
    mode  http
    stats uri       /dbs
    stats realm  Global statistics
    stats auth    admin:abc123456
listen   proxy-mysql
    bind    0.0.0.0:3336
    mode  tcp 
    balance  roundrobin
    option  tcplog       #日志格式
    server   mycat_1  10.11.0.210:8066  check  port  8066  maxconn  2000  
    server   mycat_2  10.11.0.216:8066  check  port  8066  maxconn  2000  
option  tcpka        #使用keepalive检测死链

访问 haproxy的监控程序 http://10.11.0.210:4001/dbs

技术分享图片

使用工具连接haproxy插入数据

技术分享图片

技术分享图片

强制关闭其中的一台mycat,然后通过Haproxy还是能插入数据,说明负载均衡没有问题

技术分享图片

 

技术分享图片

技术分享图片

 

以上是关于06mycat使用haproxy进行负载均衡的主要内容,如果未能解决你的问题,请参考以下文章

MySQL集群解决方案:负载均衡

HAProxy+Keepalived实现Mycat高可用

HAProxy+Keepalived实现Mycat高可用

MyCat 1.6.7(二)高可用及权限

HAproxy连接Mycat集群docker-compose版

# IT明星不是梦 #MySQL高可用集群之基于MyCat部署HaProxy实现高可用