ELK部署详解--filebeat

Posted 2021-01-09 luoyan01

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了ELK部署详解--filebeat相关的知识，希望对你有一定的参考价值。

filebeat.yml

###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.

#=========================== Filebeat prospectors =============================

filebeat.prospectors:

# Each - is a prospector. Most options can be set at the prospector level, so
# you can use different prospectors for various configurations.
# Below are the prospector specific configurations.
#指定文件的输入类型log(默认)或者stdin。
- input_type: log

# Change to true to enable this prospector configuration.
#开启
enabled: true

# Paths that should be crawled and fetched. Glob based paths.
#日志位置
paths:
- /data/services/logs/Jarvis/jwsmed_access.log
- /data/services/logs/Jarvis/JarvisSup_access.log
- /data/services/logs/Jarvis/JarvisPo_access.log
- /data/services/logs/Jarvis/wap_access.log
- /data/services/logs/Jarvis/mobile_access.log

fields:
type: "nginx-access"
fields_under_root: true
#在输入中排除符合正则表达式列表的那些行
exclude_files: [‘.gz$‘]

- input_type: log
enabled: true
paths:
- /data/services/logs/nginx_error.log
fields:
type: "nginx-error"
fields_under_root: true
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
exclude_files: [‘.gz$‘]

# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: [‘^ERR‘, ‘^WARN‘]

# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#exclude_files: [‘.gz$‘]

# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering

### Multiline options

# Mutiline can be used for log messages spanning multiple lines. This is common
# for Java Stack Traces or C-Line Continuation

# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
#multiline.pattern: ^[

# Defines if the pattern set under pattern should be negated or not. Default is false.
#multiline.negate: true

# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
# that was (not) matched before or after or as long as a pattern is not matched based on negate.
# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
#multiline.match: after

#============================= Filebeat modules ===============================

filebeat.config.modules:
# Glob pattern for configuration loading
path: ${path.config}/modules.d/*.yml

# Set to true to enable config reloading
reload.enabled: false

# Period on which files under path should be checked for changes
#reload.period: 10s

#==================== Elasticsearch template setting ==========================

setup.template.settings:
index.number_of_shards: 3
#index.codec: best_compression
#_source.enabled: false

#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:

# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging

#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
#host: "localhost:5601"

#============================= Elastic Cloud ==================================

# These settings simplify using filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

#================================ Outputs =====================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output ------------------------------
#output.elasticsearch:
# Array of hosts to connect to.
# hosts: ["localhost:9200"]

# Optional protocol and basic auth credentials.
#protocol: "https"
#username: "elastic"
#password: "changeme"

#----------------------------- Logstash output --------------------------------
#输入到logstash
output.logstash:
# The Logstash hosts
hosts: ["192.168.10.196:5044"]
#output.redis:
# hosts: ["47.93.43.57:6379"]
# password: "123.com"
# key: "nginx-access"
# db: 2
# timeout: 5
#index: logstash-nginx-access
#index: nginx-access
# Optional SSL. By default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"

#================================ Logging =====================================

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]
#logging.metrics.enabled: true
#logging.metrics.period: 10s

#============================== Xpack Monitoring ===============================
# filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#xpack.monitoring.enabled: false

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well. Any setting that is not set is
# automatically inherited from the Elasticsearch output configuration, so if you
# have the Elasticsearch output configured, you can simply uncomment the
# following line.
#xpack.monitoring.elasticsearch:

java-filebeat.yml

###################### Filebeat Configuration Example #########################

# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.

#=========================== Filebeat prospectors =============================

filebeat.prospectors:

# Each - is a prospector. Most options can be set at the prospector level, so
# you can use different prospectors for various configurations.
# Below are the prospector specific configurations.

- input_type: log

# Change to true to enable this prospector configuration.
enabled: true

# Paths that should be crawled and fetched. Glob based paths.
paths:
- /var/log/jarvis/api-gateway/api-gateway.log
- /var/log/jarvis/inventory-service/inventory-service.log
- /var/log/jarvis/message-service/message-service.log
#- /var/log/jarvis/payment-service/payment-service.log
- /var/log/jarvis/user-service/user-service.log
fields:
type: "java-access"
fields_under_root: true
exclude_files: [‘.gz$‘]

- input_type: log
enabled: true
paths:
- /var/log/jarvis/payment-service/payment-service.log
fields:
type: "java-payment"
fields_under_root: true
exclude_files: [‘.gz$‘]
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
#exclude_files: [‘.gz$‘]

# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: [‘^ERR‘, ‘^WARN‘]

# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering

### Multiline options

# Mutiline can be used for log messages spanning multiple lines. This is common
# for Java Stack Traces or C-Line Continuation

# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
#过滤
multiline.pattern: ‘^(?:[01]d|2[0-3])(?::[0-5]d){2}‘

# Defines if the pattern set under pattern should be negated or not. Default is false.
multiline.negate: true