Siemens

Posted 2021-01-05 huangbaobaoi

Sr.EE
-Complete the electronics and mechanical designs from design concepts to mass production for RUC (Rapid Update Cycle)projects in the target quality, cost and schedule and enfore project governance(管理)

- Improve the hardware design capability and quality by providing to the team technical supervision, suitable trainings and design guidelines so to meet the first time right
strategy

- Analyze and optimise continuously the overall design efficiency and producitvity in the areas of resources planning and workflow enhancement.

- Create the electronics and mechanical design modules according to the marketing requirement library and apply it properly for new development projects.

- Work as an electronic designer for some development projects

- Liaise 保持联络 and coordiation development activities across multiple development teams and EMS suppliers in the entire hardware development cycles including gathering of
requirements, functional and technical design

- Provide technical supports to PLs, PMs and other departments for new project feasibility study

- Provide technical supports to Maintenance PLs, Quality Manager and PMs for product trouble shooting in the field during the product life cycle.

What do I need to qualify for this job?
- University graduated in Electronic Engineering or related disciplines
- Around 5 years solid design experiences in MCU based electronic or electromechanical product development prefered in HVAC field in multinational conpany.

- Experiences in leading team members for new product development from design concepts to mass production

- Familiar with RF product design

- Familiar with sensor technology

- Familiar with EMS manufacturing process

- Familiar with electronic design safety and quality regulation such as UL, CE and FCC.

- Familiar with embedded software / firmware programing will be an advantage.

- Experiences in performing feasibility study in new design concepts

- In-depth knowledge of electronic design tools such as Mentor Graphic for circuit simulation, schematic and PCB layout

- Good knowledge in 6 Sigma tools application such as FMEA

- Good communication and people skills

- Self-motivate, independent, result-driven and a good team player

- Proficiency in both written and spoken English and Mandarin

高级嵌入式软件工程师
What are my responsibilities?
1. Perform the embedded software/ firmware deveopment from design concepts to mass production for HVAC projects in the target quality, cost and schedule;
2. Support the team supervisor to improve the design capability and quality so to meet the first time right strategy;
3. Support the team supervisor to optimise continuously the overall design efficiency and producitvity.
4. Support the team supervisor to create the software design modules and solution library according to the marketing requirement library and apply it properly for new
development projects.
5. provide technical supports to PLs, PMs and other departments for new project feasibility study
6. Provide technical supports to maintenance PLs, Quality Manager and PMs for product trouble shooting in the field during the product life cycle.

What do I need to qualify for this job?
1. at least 5 years of solid experiences in embeded software/ firmware development for electronics or electromechanical projects prefered in HVAC field in multinational company.
In-depth knowledge of C/C++programming and familiar with MCU based programming;
Others:
? University graduated in Computer Science or Engineering related disciplines;
? Knowledge in software development based on RTOS and android OS is an advantage;
?WIFI/Zigbee development experience is an advantage;
?Familiar with software development tools and processes, strong in problem solving & trouble shooting skills and knowledge;
? Self-motivate, independent and result-driven;
?good cooperate and communication skills with team members & suppliers;
? Proficiency in both written and spoken English and Mandarin;
?UI design/development base LCD and full touch screen;
? Very Strong self study ability;
?Project management skill is preferred.

Hardware engineer
What are my responsibilities?
*Participate in system inteconnection design, and independently implement electronic design and development for delivery of high quality products on schedule, including
schematics design, BOM generation, EMC design, analog simulation, components selection, constraint design, review and support for PCB layout etc.
参与系统互连设计，独立完成电子设计和开发，包括原理图设计，生成元器件清单，EMC设计，模拟仿真，元器件选择，布局布线约束设计支持和检查等，以保证高质量产品的按期交付;
*Build function test plan and set up function test cases to verify circuit design
构建功能测试计划并完成功能测试搭建以验证电路设计;
*Independently accomplish technical document and report in English according to the requirements of project development
依据项目开发需要，独立完成英文技术文档和报告;
*Be capable of providing technical training for team improvement.
能为团队进步提供技术培训;
*Interact with multi-disciplinary team to ensure a high quality design for mutual integration
能够融入多学科的开发团队并确保高质量的设计能相互集成;
*Fully understand essentials of development process and contribute to process improvement
充分理解研发流程的精髓并能为流程改进做出贡献.

What do I need to qualify for this job?
1. Bachelor degree or above, master degree is preferred, major in electrical and electronic engineering, industrial automation or related
本科以上学历，硕士优先，电子工程，工业自动化或相关专业毕业
2. 5+ years related working experience in electrical and electronic design, preferably 1+ year’s product design experiences in HVAC or FS
5年以上电子设计相关工作经验，有1年以上暖通空调行业或安防行业产品设计经验者优先
3. Preferably working experience under regular project management and process control
有在正规项目管理和流程控制下的工作经验者优先
4. Experiences in international companies are advantages
有国际企业工作经历者优先
Others:
1. Proficient in digital/analog mixed circuit design, especially analysis & constraint design of high-speed digital circuit, communication buses, switching power supply (basic
topologies, power-stage design, dissipation analysis, small signal transfer model & loop compensation), frequency domain analysis of operational amplifier, ADC circuit design
etc., preferably experienced in motor driving.
精通数模混合电路设计，特别是高速数字电路分析和约束设计，通讯总线，开关电源(基本拓补，功率级设计，损耗分析，小信号传递模型和环路补偿)，运放频域分析和模数转换器等电路设计，有电机
驱动经验者优先
2. Adept in industrial product design and EMC troubleshooting with rich knowledge in EMC design theory, reliability, safety , thermal analysis, electronic components technology
精通工业级产品设计，EMC问题分析和解决,在EMC设计理论，可靠性，安规，热分析，电子器件技术方面有丰富的知识
3. Skillful at EDA tools, Preferably experienced in Mentor Graphics’ DxDesigner, Expedition and Systemvision
熟练使用EDA工具，有Mentor Graphics DxDesigner, Expedition和Systemvision使用经验者优先
4. Preferably have basic knowledge of product development process and HVAC or FS field
有产品研发流程方面和暖通空调领域或安防领域的基础知识者优先
5. Strong capability in English reading and writing as well as English speaking
在英语读写和口语方面有较强的能力

NPI Manager
1. Create NPI team with cross function members to do NPI projects and success to finish all NPI period tasks before the project transfer to mass production.
2. Need to create the production concept and planning for the project, evaluate the budget for the project and product price estimate and calculation is must. Control the
project production plan and every work package status (Work cell create, equipment developing, production documents develop and etc. ), especially the cost, schedule and
quality.
3. Coordinate the resource to do the trial run for NPI project in production before it transfers to mass production. And trial report as output is must.
4. Performance evaluation for project team engineers.
What do I need to qualify for this job?
1. More than 5 years working experience in electronic manufacture and at least 3 years projects management;
2. Familiar with projects management knowledge and professional used, especially management skill
3. Knowledge of production process;
4. Strong conflict solving skill;
5. Bachelor degree or above; PMP certificate is better

高级认证工程师
What are my responsibilities?
1.Independently implement product conformity design and verification for HVAC products such as air condition controller, thermostat and room unit, including design conformity
requirement, verify and fix corrective solution with designer, support and review internal technical documents, apply the 3rd party product certification etc. To ensure the
product conform the related CE/UL standards.
独立完成暖通空调产品(如:空调控制器，温控器和房间控制器)的产品合规设计和验证工作，包括根据标准及产品特点制定产品合规设计要求，协同设计工程师制定并验证整改方案，内部文档支持和检查
，外部认证申请及技术沟通等，确保产品符合CE/UL等相关标准要求。
2.Design reliability test system, verify product lifecycle, MTBF, robustness… good know how of reliable test methodology and capable to implement DFMEA.
设计产品可靠性测试系统，验证产品生命周期、MBTF、稳健设计；熟练掌握可靠性测试方法，具备DFMEA执行能力；
3.Be capable of study and tracking new test tool or test methodology; Good sense on design quality validation test, risk/reliability estimation analysis. Introduce new
process or mindset to team.
研究和追踪新的测试工具和方法论，提高研发设计质量的可验证、可预测能力，介绍新流程或理念，提高团队的设计验证水平。
4.Be capable of providing design input with project’s lesson & learn, and technical knowledge share for team improvement
整理项目Lesson & Learn并形成设计输入，为团队进步提供技术知识共享
5.To carry out the work under development process, fully understand essentials of the process and contribute to process improvement
依据研发流程开展工作，充分理解流程精髓并为流程改进做出贡献
What do I need to qualify for this job?
1. Bachelor degree or above, master degree is preferred, major in electrical and electronic engineering, industrial automation or related
本科以上学历，硕士优先，电子工程，工业自动化或相关专业毕业
2. 5+ years related working experience in EMC design or test and product certification
5年以上EMC设计或测试及产品认证相关工作经验
3. Adept in electronic product LVD and EMC standards, preferably 1+ year’s product certification experience in HVAC
精通电子产品的安全和电磁兼容等相关标准，有1年以上暖通空调行业产品认证经验者优先
4. Good communication skill, carefully and strong sense of responsibility
良好的沟通能力，做事细致认真，责任心强
5. Preferably working experience under regular project management and process control
有在正规项目管理和流程控制下的工作经验者优先
6. Experiences in international companies or cooperation with the 3rd party certification authority are advantages
有国际企业工作经历或与国际第三方认证机构合作经验者优先

医疗注册工程师
What are my responsibilities?
1. Planning and performing of measurements and documentation of evidences for electrical and mechanical safety at medical electrical products on basis of IEC requirements.
根据IEC的要求，计划和执行医疗电子产品的电气和机械安全证据的测量和记录。
2. Performing of measurements and investigations during the development phases for electrical and mechanical safety and electromagnetic compatibility.
3. Evaluation of evidences for functional safety and risk management.
4. Development of concepts and remedial actions (e.g. isolations coordination) for the realization of normative requirements regarding product safety.
5. Advising and support of internal and external customers at the interpretation and realization of regulatory and normative requirements during the complete product life cycle.
6. Analyze of regulatory and normative product requirements regarding electrical and mechanical safety and preparation of these with the purpose of global market access.
7. Working in accordance to the quality requirements of the ISO IEC 17025.
What do I need to qualify for this job?
Bachelor degree or above on Biomedical Engineering, Electrical Engineering or other electrical related majors;
Professional experience more than 3-4 years is nice to have.
Medical or ITE product safety knowledge (Standards IEC 60601-x-y Series or IEC 60950).
Risk management and EMC experiences are preferred.
Intercultural experience desirable
Good English speaking and writing mandatory.