monit官方摘录

Posted pycode

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了monit官方摘录相关的知识,希望对你有一定的参考价值。

Here are the legal global keywords:
 Keyword         Function
 ----------------------------------------------------------------
 set daemon      Set a background poll interval in seconds.
 set init        Set Monit to run from init. Monit will not
                 transform itself into a daemon process.
 set logfile     Name of a file to dump error- and status-
                 messages to. If syslog is specified as the 
                 file, Monit will utilize the syslog daemon
                 to log messages. This can optionally be 
                 followed by ‘facility <facility>‘ where 
                 facility is ‘log_local0‘ - ‘log_local7‘ or 
                 ‘log_daemon‘. If no facility is specified, 
                 LOG_USER is used.
 set mailserver  The mailserver used for sending alert
                 notifications. If the mailserver is not 
                 defined, Monit will try to use ‘localhost‘ 
                 as the smtp-server for sending mail. You 
                 can add more mail servers, if Monit cannot
                 connect to the first server it will try the
                 next server and so on.
 set mail-format Set a global mail format for all alert
                 messages emitted by monit.
 set idfile      Explicit set the location of the Monit id
                 file. E.g. set idfile /var/monit/id.
 set pidfile     Explicit set the location of the Monit lock
                 file. E.g. set pidfile /var/run/xyzmonit.pid.
 set statefile   Explicit set the location of the file Monit 
                 will write state data to. If not set, the
                 default is $HOME/.monit.state. 
 set httpd port  Activates Monit http server at the given 
                 port number.
 ssl enable      Enables ssl support for the httpd server.
                 Requires the use of the pemfile statement.
 ssl disable     Disables ssl support for the httpd server.
                 It is equal to omitting any ssl statement.
 pemfile         Set the pemfile to be used with ssl.
 clientpemfile   Set the pemfile to be used when client
                 certificates should be checked by monit.
 address         If specified, the http server will only 
                 accept connect requests to this addresses
                 This statement is an optional part of the
                 set httpd statement.
 allow           Specifies a host or IP address allowed to
                 connect to the http server. Can also specify
                 a username and password allowed to connect
                 to the server. More than one allow statement
                 are allowed. This statement is also an 
                 optional part of the set httpd statement.
 read-only       Set the user defined in username:password
                 to read only. A read-only user cannot change
                 a service from the Monit web interface.
 include         include a file or files matching the globstring

 Here are the legal service entry keywords:
 Keyword         Function
 ----------------------------------------------------------------
 check           Starts an entry and must be followed by the type
                 of monitored service {filesystem|directory|file|host
                 process|system|program} and a descriptive name for
                 the service.
 pidfile         Specify the  process pidfile. Every
                 process must create a pidfile with its
                 current process id. This statement should only
                 be used in a process service entry.
 path            Must be followed by a path to the block
                 special file for filesystem, regular
                 file, directory or a process‘s pidfile.
 group           Specify a groupname for a service entry.
 start           The program used to start the specified 
                 service. Full path is required. This 
                 statement is optional, but recommended.
 stop            The program used to stop the specified
                 service. Full path is required. This 
                 statement is optional, but recommended.
 pid and ppid    These keywords may be used as standalone
                 statements in a process service entry to
                 override the alert action for change of
                 process pid and ppid.
 uid and gid     These keywords are either 1) an optional part of
                 a start, stop or exec statement. They may be
                 used to specify a user id and a group id the
                 program (process) should switch to upon start.
                 This feature can only be used if the superuser
                 is running monit. 2) uid and gid may also be
                 used as standalone statements in a file service
                 entry to test a file‘s uid and gid attributes.
 host            The hostname or IP address to test the port
                 at. This keyword can only be used together
                 with a port statement or in the check host
                 statement.
 port            Specify a TCP/IP service port number which 
                 a process is listening on. This statement
                 is also optional. If this statement is not
                 prefixed with a host-statement, localhost is
                 used as the hostname to test the port at.
 type            Specifies the socket type Monit should use when
                 testing a connection to a port. If the type
                 keyword is omitted, tcp is used. This keyword
                 must be followed by either tcp, udp or tcpssl.
 tcp             Specifies that Monit should use a TCP 
                 socket type (stream) when testing a port.
 tcpssl          Specifies that Monit should use a TCP socket
                 type (stream) and the secure socket layer (ssl)
                 when testing a port connection.
 udp             Specifies that Monit should use a UDP socket
                 type (datagram) when testing a port.
 certmd5         The md5 sum of a certificate a ssl forged 
                 server has to deliver.
 proto(col)      This keyword specifies the type of service 
                 found at the port. See CONNECTION TESTING
                 for list of supported protocols.
                 You‘re welcome to write new protocol test
                 modules. If no protocol is specified Monit will
                 use a default test which in most cases are good
                 enough.
 request         Specifies a server request and must come
                 after the protocol keyword mentioned above.
                  - for http it can contain an URL and an
                    optional query string.
                  - other protocols does not support this
                    statement yet
 send/expect     These keywords specify a generic protocol. 
                 Both require a string whether to be sent or
                 to be matched against (as extended regex if 
                 supported).  Send/expect can not be used 
                 together with the proto(col) statement.
 unix(socket)    Specifies a Unix socket file and used like 
                 the port statement above to test a Unix 
                 domain network socket connection.
 URL             Specify an URL string which Monit will use for
                 connection testing.
 content         Optional sub-statement for the URL statement.
                 Specifies that Monit should test the content
                 returned by the server against a regular 
                 expression.
 timeout x sec.  Define a network port connection timeout. Must
                 be followed by a number in seconds and the 
                 keyword, seconds.
 timeout         Define a service timeout. Must be followed by
                 two digits. The first digit is max number of
                 restarts for the service. The second digit
                 is the cycle interval to test restarts. 
                 This statement is optional.
 alert           Specifies an email address for notification
                 if a service event occurs. Alert can also
                 be postfixed, to only send a message for
                 certain events. See the examples above. More
                 than one alert statement is allowed in an
                 entry. This statement is also optional.
 noalert         Specifies an email address which don‘t want
                 to receive alerts. This statement is also
                 optional.
 restart, stop   These keywords may be used as actions for 
 unmonitor,      various test statements. The exec statement is
 start and       special in that it requires a following string
 exec            specifying the program to be execute. You may
                 also specify an UID and GID for the exec 
                 statement. The program executed will then run
                 using the specified user id and group id.
 mail-format     Specifies a mail format for an alert message 
                 This statement is an optional part of the
                 alert statement.
 checksum        Specify that Monit should compute and monitor a
                 file‘s md5/sha1 checksum. May only be used in a 
                 check file entry.
 expect          Specifies a md5/sha1 checksum string Monit 
                 should expect when testing the checksum. This 
                 statement is an optional part of the checksum 
                 statement.
 timestamp       Specifies an expected timestamp for a file
                 or directory. More than one timestamp statement
                 are allowed. May only be used in a check file or
                 check directory entry.
 changed         Part of a timestamp statement and used as an
                 operator to simply test for a timestamp change.
 every           Validate this entry only at every n poll cycle
                 or per cron specification. Useful in daemon mode
                 when the cycle is short and a service takes some
                 time to start or to suppress monitoring during
                 backup windows.
 mode            Must be followed either by the keyword active,
                 passive or manual. If active, Monit will restart
                 the service if it is not running (this is the
                 default behavior). If passive, Monit will not
                 (re)start the service if it is not running - it
                 will only monitor and send alerts (resource
                 related restart and stop options are ignored
                 in this mode also). If manual, Monit will enter
                 active mode only if a service was started under
                 monit‘s control otherwise the service isn‘t
                 monitored.
 cpu             Must be followed by a compare operator, a number 
                 with "%" and an action. This statement is used
                 to check the cpu usage in percent of a process
                 with its children over a number of cycles. If
                 the compare expression matches then the 
                 specified action is executed.
 mem             The equivalent to the cpu token for memory of a 
                 process (w/o children!).  This token must be 
                 followed by a compare operator a number with 
                 unit {B|KB|MB|GB|%|byte|kilobyte|megabyte|
                 gigabyte|percent} and an action.
 swap            Token for system swap usage monitoring. This token
                 must be followed by a compare operator a number with 
                 unit {B|KB|MB|GB|%|byte|kilobyte|megabyte|gigabyte|percent}
                 and an action.
 loadavg         Must be followed by [1min,5min,15min] in (), a 
                 compare operator, a number and an action. This
                 statement is used to check the system load 
                 average over a number of cycles. If the compare 
                 expression matches then the specified action is 
                 executed.
 children        This is the number of child processes spawn by a
                 process. The syntax is the same as above.
 totalmem        The equivalent of mem, except totalmem is an
                 aggregation of memory, not only used by a
                 process but also by all its child
                 processes. The syntax is the same as above.
 space           Must be followed by a compare operator, a
                 number, unit {B|KB|MB|GB|%|byte|kilobyte|
                 megabyte|gigabyte|percent} and an action.
 inode(s)        Must be followed by a compare operator, integer
                 number, optionally by percent sign (if not, the
                 limit is absolute) and an action.
 perm(ission)    Must be followed by an octal number describing
                 the permissions.
 size            Must be followed by a compare operator, a
                 number, unit {B|KB|MB|GB|byte|kilobyte|
                 megabyte|gigabyte} and an action.
 uptime          Must be followed by a compare operator, a
                 number, unit {second(s)|minute(s)|hour(s)|day(s)}
                 and an action.
 depends (on)    Must be followed by the name of a service this
                 service depends on.
每一进程都有pid,存放在/var/run/monit.pid 这个文件里面会存放一个数值


CONFIGURATION EXAMPLES

The simplest form is just the check statement. In this example wecheck to see if the server is running and log a message if not:

 check process resin with pidfile /usr/local/resin/srun.pid

Checking process without pidfile:

 check process pager matching "/sbin/dynamic_pager -F /private/var/vm/swapfile"

To have Monit start the server if it‘s not running, add a startstatement:

 check process resin with pidfile /usr/local/resin/srun.pid
       start program = "/usr/local/resin/bin/srun.sh start"
       stop program = "/usr/local/resin/bin/srun.sh stop"

Here‘s a more advanced example for monitoring an apacheweb-server listening on the default port number for HTTP andHTTPS. In this example Monit will restart apache if it‘s notaccepting connections at the port numbers. The method Monit usefor a process restart is to first execute the stop-program, waitup to 30s for the process to stop and then execute the start-programand wait up to 30s for it to start. The length of start or stoptimeout can be overridden using the ‘timeout‘ option. If Monit wasunable to stop or start the service a failed alert message willbe sent if you have requested alert messages to be sent.

 check process apache with pidfile /var/run/httpd.pid
       start program = "/etc/init.d/httpd start" with timeout 60 seconds
       stop program  = "/etc/init.d/httpd stop"
       if failed port 80 then restart
       if failed port 443 with timeout 15 seconds then restart

This example demonstrate how you can run a program as a specifieduser (uid) and with a specified group (gid). Many daemon programswill do the uid and gid switch by them self, but for thoseprograms that does not (e.g. Java programs), monit‘s ability tostart a program as a certain user can be very useful. In thisexample we start the Tomcat Java Servlet Engine as the standardnobody user and group. Please note that Monit will only switchuid and gid for a program if the super-user is running monit,otherwise Monit will simply ignore the request to change uid andgid.

 check process tomcat with pidfile /var/run/tomcat.pid
       start program = "/etc/init.d/tomcat start" 
             as uid nobody and gid nobody
       stop program  = "/etc/init.d/tomcat stop"
             # You can also use id numbers instead and write:
             as uid 99 and with gid 99
       if failed port 8080 then alert

In this example we use udp for connection testing to check if thename-server is running and also use timeout and alert:

 check process named with pidfile /var/run/named.pid
       start program = "/etc/init.d/named start"
       stop program  = "/etc/init.d/named stop"
       if failed port 53 use type udp protocol dns then restart
       if 3 restarts within 5 cycles then timeout

The following example illustrates how to check if the service‘sophie‘ is answering connections on its Unix domain socket:

 check process sophie with pidfile /var/run/sophie.pid
       start program = "/etc/init.d/sophie start"
       stop  program = "/etc/init.d/sophie stop"
       if failed unix /var/run/sophie then restart

In this example we check an apache web-server running onlocalhost that answers for several IP-based virtual hosts orvhosts, hence the host statement before port:

 check process apache with pidfile /var/run/httpd.pid
       start "/etc/init.d/httpd start"
       stop  "/etc/init.d/httpd stop"
       if failed host www.sol.no port 80 then alert
       if failed host shop.sol.no port 443 then alert
       if failed host chat.sol.no port 80 then alert
       if failed host www.tildeslash.com port 80 then alert

To make sure that Monit is communicating with a http server aprotocol test can be added:

 check process apache with pidfile /var/run/httpd.pid
       start "/etc/init.d/httpd start"
       stop  "/etc/init.d/httpd stop"
       if failed host www.sol.no port 80 
          protocol HTTP
          then alert

This example shows a different way to check a webserver usingthe send/expect mechanism:

 check process apache with pidfile /var/run/httpd.pid
       start "/etc/init.d/httpd start"
       stop  "/etc/init.d/httpd stop"
       if failed host www.sol.no port 80 
          send "GET / HTTP/1.0
Host: www.sol.no

"
          expect "HTTP/[0-9.]{3} 200 .*
"
          then alert

To make sure that Apache is logging successfully (i.e. no more than 60 percent of child servers are logging), use its mod_statuspage at www.sol.no/server-status with this special protocol test:

 check process apache with pidfile /var/run/httpd.pid
       start "/etc/init.d/httpd start"
       stop  "/etc/init.d/httpd stop"
       if failed host www.sol.no port 80
       protocol apache-status loglimit > 60% then restart

This configuration can be used to alert you if 25 percent or moreof Apache child processes are stuck performing DNS lookups:

 check process apache with pidfile /var/run/httpd.pid
       start "/etc/init.d/httpd start"
       stop  "/etc/init.d/httpd stop"
       if failed host www.sol.no port 80
       protocol apache-status dnslimit > 25% then alert

Here we use an icmp ping test to check if a remote host is up andif not send an alert:

 check host www.tildeslash.com with address www.tildeslash.com
       if failed icmp type echo count 5 with timeout 15 seconds
          then alert

In the following example we ask Monit to compute and verify thechecksum for the underlying apache binary used by the start andstop programs. If the the checksum test should fail, monitoringwill be disabled to prevent possibly starting a compromisedbinary:

 check process apache with pidfile /var/run/httpd.pid
       start program = "/etc/init.d/httpd start"
       stop program  = "/etc/init.d/httpd stop"
       if failed host www.tildeslash.com port 80 then restart
       depends on apache_bin
 check file apache_bin with path /usr/local/apache/bin/httpd
       if failed checksum then unmonitor

In this example we ask Monit to test the checksum for a documenton a remote server. If the checksum was changed we send an alert:

 check host tildeslash with address www.tildeslash.com
       if failed port 80 protocol http 
          and request "/monit/dist/monit-4.0.tar.gz"
              with checksum f9d26b8393736b5dfad837bb13780786
       then alert

Here are a couple of tests for some popular communicationservers, using the SIP protocol. First we test a FreeSWITCHserver and then an Asterisk server

 check process freeswitch 
    with pidfile /usr/local/freeswitch/log/freeswitch.pid
  start program = “/usr/local/freeswitch/bin/freeswitch -nc -hp”
  stop program = “/usr/local/freeswitch/bin/freeswitch -stop”
  if totalmem > 1000.0 MB for 5 cycles then alert
  if totalmem > 1500.0 MB for 5 cycles then alert
  if totalmem > 2000.0 MB for 5 cycles then restart
  if cpu > 60% for 5 cycles then alert
  if failed port 5060 type udp protocol SIP 
     target [email protected] and maxforward 10 
  then restart
  if 5 restarts within 5 cycles then timeout
 check process asterisk 
   with pidfile /var/run/asterisk/asterisk.pid
   start program = “/usr/sbin/asterisk”
   stop program = “/usr/sbin/asterisk -r -x ’shutdown now’”
   if totalmem > 1000.0 MB for 5 cycles then alert
   if totalmem > 1500.0 MB for 5 cycles then alert
   if totalmem > 2000.0 MB for 5 cycles then restart
   if cpu > 60% for 5 cycles then alert
   if failed port 5060 type udp protocol SIP 
     and target [email protected] maxforward 10 
   then restart
   if 5 restarts within 5 cycles then timeout

Some servers are slow starters, like for example Java basedApplication Servers. So if we want to keep the poll-cycle low(i.e. < 60 seconds) but allow some services to take its time tostart, the every statement is handy:

 check process dynamo with pidfile /etc/dynamo.pid every 2 cycles
       start program = "/etc/init.d/dynamo start"
       stop program  = "/etc/init.d/dynamo stop"
       if failed port 8840 then alert

Here is an example where we group together two database entriesso you can manage them together, e.g.; ‘Monit -g database startall‘. The mode statement is also illustrated in the first entryand have the effect that Monit will not try to (re)start thisservice if it is not running:

 check process sybase with pidfile /var/run/sybase.pid
       start = "/etc/init.d/sybase start"
       stop  = "/etc/init.d/sybase stop"
       mode passive
       group database
 check process oracle with pidfile /var/run/oracle.pid
       start program = "/etc/init.d/oracle start"
       stop program  = "/etc/init.d/oracle stop"
       mode active # Not necessary really, since it‘s the default
       if failed port 9001 then restart
       group database

Here is an example to show the usage of the resource checks. Itwill send an alert when the CPU usage of the http daemon and itschild processes raises beyond 60% for over two cycles. Apache isrestarted if the CPU usage is over 80% for five cycles or thememory usage over 100Mb for five cycles or if the machines loadaverage is more than 10 for 8 cycles:

 check process apache with pidfile /var/run/httpd.pid
       start program = "/etc/init.d/httpd start"
       stop program  = "/etc/init.d/httpd stop"
       if cpu > 40% for 2 cycles then alert
       if totalcpu > 60% for 2 cycles then alert
       if totalcpu > 80% for 5 cycles then restart
       if mem > 100 MB for 5 cycles then stop
       if loadavg(5min) greater than 10.0 for 8 cycles then stop

This examples demonstrate the timestamp statement with exec andhow you may restart apache if its configuration file waschanged.

 check file httpd.conf with path /etc/httpd/httpd.conf
       if changed timestamp
          then exec "/etc/init.d/httpd graceful"

In this example we demonstrate usage of the extended alertstatement and a file check dependency:

 check process apache with pidfile /var/run/httpd.pid
      start = "/etc/init.d/httpd start"
      stop  = "/etc/init.d/httpd stop"
      alert [email protected] on {nonexist, timeout} 
        with mail-format { 
              from:     [email protected]$HOST
              subject:  apache $EVENT - $ACTION
              message:  This event occurred on $HOST at $DATE. 
              Your faithful employee,
              monit
      }
      if failed host www.tildeslash.com  port 80 then restart
      if 3 restarts within 5 cycles then timeout
      depend httpd_bin
      group apache
 check file httpd_bin with path /usr/local/apache/bin/httpd
       alert [email protected] on {checksum, timestamp, 
                  permission, uid, gid}
             with mail-format {subject: Alaaarrm! on $HOST}
       if failed checksum 
          and expect 8f7f419955cefa0b33a2ba316cba3659
              then unmonitor
       if failed permission 755 then unmonitor
       if failed uid root then unmonitor
       if failed gid root then unmonitor
       if changed timestamp then alert
       group apache

In this example, we demonstrate usage of the depend statement. Inthis case, we want to start oracle and apache. However, we‘ve setup apache to use oracle as a back end, and if oracle isrestarted, apache must be restarted as well.

 check process apache with pidfile /var/run/httpd.pid
       start = "/etc/init.d/httpd start"
       stop  = "/etc/init.d/httpd stop"
       depends on oracle
 check process oracle with pidfile /var/run/oracle.pid
       start = "/etc/init.d/oracle start"
       stop  = "/etc/init.d/oracle stop"
       if failed port 9001 then restart

Next, we have 2 services, oracle-import and oracle-export thatneed to be restarted if oracle is restarted, but are independentof each other.

 check process oracle with pidfile /var/run/oracle.pid
       start = "/etc/init.d/oracle start"
       stop  = "/etc/init.d/oracle stop"
       if failed port 9001 then restart
 check process oracle-import 
      with pidfile /var/run/oracle-import.pid
       start = "/etc/init.d/oracle-import start"
       stop  = "/etc/init.d/oracle-import stop"
       depends on oracle
 check process oracle-export 
      with pidfile /var/run/oracle-export.pid
       start = "/etc/init.d/oracle-export start"
       stop  = "/etc/init.d/oracle-export stop"
       depends on oracle

Finally an example with all statements:

 check process apache with pidfile /var/run/httpd.pid
       start program = "/etc/init.d/httpd start"
       stop program  = "/etc/init.d/httpd stop"
       if 3 restarts within 5 cycles then timeout
       if failed host www.sol.no  port 80 protocol http
          and use the request "/login.cgi"
              then alert
       if failed host shop.sol.no port 443 type tcpssl 
          protocol http and with timeout 15 seconds 
              then restart
       if cpu is greater than 60% for 2 cycles then alert
       if cpu > 80% for 5 cycles then restart
       if totalmem > 100 MB then stop
       if children > 200 then alert
       alert [email protected] with mail-format {from: [email protected]}
       every 2 cycles
       mode active
       depends on weblogic
       depends on httpd.pid
       depends on httpd.conf
       depends on httpd_bin
       depends on datafs
       group server
 check file httpd.pid with path /usr/local/apache/logs/httpd.pid
       group server
       if timestamp > 7 days then restart
       every 2 cycles
       alert [email protected] with mail-format {from: [email protected]}
       depends on datafs
 check file httpd.conf with path /etc/httpd/httpd.conf
       group server
       if timestamp was changed 
          then exec "/usr/local/apache/bin/apachectl graceful"
       every 2 cycles
       alert [email protected] with mail-format {from: [email protected]}
       depends on datafs
 check file httpd_bin with path /usr/local/apache/bin/httpd
       group server
       if failed checksum and expect the sum
          8f7f419955cefa0b33a2ba316cba3659 then unmonitor
       if failed permission 755 then unmonitor
       if failed uid root then unmonitor
       if failed gid root then unmonitor
       if changed size then alert
       if changed timestamp then alert
       every 2 cycles
       alert [email protected] with mail-format {from: [email protected]}
       alert [email protected] on { checksum, size, timestamp, uid, gid } 
       depends on datafs
 check filesystem datafs with path /dev/sdb1
       group server
       start program  = "/bin/mount /data"
       stop program  =  "/bin/umount /data"
       if failed permission 660 then unmonitor
       if failed uid root then unmonitor
       if failed gid disk then unmonitor
       if space usage > 80 % then alert
       if space usage > 94 % then stop
       if inode usage > 80 % then alert
       if inode usage > 94 % then stop
       alert [email protected]
 check host ftp.redhat.com with address ftp.redhat.com
       if failed icmp type echo with timeout 15 seconds
          then alert 
       if failed port 21 protocol ftp
          then exec "/usr/X11R6/bin/xmessage -display
                     :0 ftp connection failed"
       alert [email protected]
 
 check host www.gnu.org with address www.gnu.org
       if failed port 80 protocol http 
          and request "/pub/gnu/bash/bash-2.05b.tar.gz"
              with checksum 8f7f419955cefa0b33a2ba316cba3659
       then alert
       alert [email protected] with mail-format {
            subject: The gnu server may be hacked again! }








以上是关于monit官方摘录的主要内容,如果未能解决你的问题,请参考以下文章

16.Update Methods-官方文档摘录

摘录ECMAScript官方文档中重要的两段话

Configure the mongo Shell-官方文档摘录

8.Query Documents-官方文档摘录

Surveillance Monitering入门学习论文笔记

Cocos Creator 加载和切换场景(官方文档摘录)