IDES ERP 6.0 incl. EHP8 on

Posted 2020-12-23 weikui

799639 - IDES - General Information about the usage of IDES systems

Symptom

IDES Demo System

Other Terms

IDES for customers

Solution

--- information will be added ---

Terms Of Usage:

Due to security reasons we strongly recommend that you do NOT install
the IDES demo system in the same network as your productive environment.
Please separate the demo environment from your productive environment.
Also we do not recommend that real master data (e.g. client copy of
productive systems) is set up in the IDES system.

Please note that the IDES shipment is a service from SAP on a voluntary
basis. It is not allowed to use IDES systems in production or as
productive systems in order to generate revenue.

Content/Usage:

IDES demo systems and IDES demo landscapes are copies of SAP internal
demo systems with the data of the IDES model company in several clients.
The IDES systems can support demos, functional and tests, self-study or
functional evaluation based on the preconfigured data/clients.
IDES must not be used in production!
The IDES systems do not contain training data that are used in the SAP
training courses.
Customer training etc. based on the IDES systems are not supported.

Hardware Requirements:

The version specific hardware requirements can be found in the specific IDES notes.
Additionally the sizing tools from SAP can be used. Please have a look at the SAP Service Marketplace, Quicklink "sizing" (http://service.sap.com/sizing)

IDES Data/ IDES Client:

IDES is installed as a separate system with it‘s own set of data in different clients!
The IDES model cannot be merged into an existing system nor should IDES be merged with other models.
Client transports are not availble.

Demo-Content / Training Data:

IDES-Systems that are shipped to customers are copies from SAP internal
demo systems and not from the SAP training systems that you might know
from SAP training courses.
The clients used in the courses and the data used in the courses are NOT
included in the IDES shipment.
The latest training system available for customers is the IDES TS 4.6B
(Mat.Nr.51012488 and 51012489). You can order this system by opening an
OSS-message to component XX-IDES.

Support Packages / Upgrade / EHPs:

IDES specific Support Packages do not exist.

Patching and Upgrade of IDES systems are no longer supported. IDES should only be operated as a seperate installation. Each new release requires a new installation!

Due to the complexity of the IDES systems and the number of preinstalled components/AddOns it is not possible any more to generate a consistant maintenance (MOPZ) within the Solution Manager. Because of this technical restriction we recommend to wait for coming IDES versions/releases.

Kernel Updates / Kernel Patches are recommended!

SPAU/SPDD:

The Modification Adjustment can be ignored as far as you did not make own modifications.

IDES Content:

Please note that all Support Packages / Enhancement Packages / Upgrades
do not have any additional IDES-specific parts. You will not find
additionaly demo data in your system after a technical upgrade.

Download:

Please review the release specific IDES notes. Here you will find detailed information rgd. the download location.

Available releases:

IDES ECC 6.0 EhP8 for classic databases -> Please have a look at note 2432361.

IDES S/4Hana 1610 on-premise -> Please have a look at note 2445594

IDES ECC 6.0 EhP8 for SAP HANA -> Please have a look at note 2432302.

 

LATEST INFORMATION:

Please note that the IDES-offering will be discontinued.

Be aware that only the latest releases are still available for download (see above).

 

As an alternative please have a look at the following blogs/notes:

SAP S/4HANA Fully-Activated Appliance

Note 2041140

 

Please be aware that this is not the official successor of IDES and that specific license conditions etc. may apply.

 

2432302 - IDES ERP 6.0 incl. EHP8 on HANA

Symptom

IDES ERP 6.0 incl. EHP8 on HANA

Other Terms

IDES ERP 6.0 incl. EHP8 on HANA

Reason and Prerequisites

IDES ERP 6.0 incl. EHP8 on HANA

Solution

1 Terms Of Usage

Due to security reasons we strongly recommend that you do NOT install the IDES demo system in the same network as your productive environment. Please separate the demo environment from your productive environment.
Also we do not recommend that real master data (e.g. client copy of productive systems) is set up in the IDES system.

Please note that the IDES shipment is a service from SAP on a voluntary basis. It is not allowed to use IDES systems in production or as productive systems in order to generate revenue.

2. Components

The IDES installation package contains the following component:
  SAP ERP 6.0 ECC 6.0 - unicode
It is the ABAP-AS which contains the data of the model company in client
800.

3. Hardware Requirements

Sizing Recommendation:

- HANA Appliance RAM 512GB (Comfortable Sizing)

• data                 3  x Memory
• log                   1 x Memory
• shared/Trace    1x Memory

- HANA TDI RAM 512GB  (Reduced Sizing)

• data                 1-2  x Memory
• log                   0.5 x Memory
• shared/Trace    1x Memory

Reason for comfortable sizing: Appliance can not always be changed on short notice (add more disks) depending on the general design, etc. for the HW partner offering choice. Source: SAP HANA Administration Guide

Reason for reduced sizing: Customers can change disk layout (extension of disk areas) on short notice because they are responsible for the complete HANA Stack.

4. Download

Please note that a physical shipment of an IDES installation package is no longer possible.
Please download the installation media via the Software Download Center in the SAP Service Marketplace:
http://support.sap.com/swdc>
-> Installations and Upgrades
-> A - Z Index
-> E -> SAP ERP
-> SAP ERP ENHANCE PACKAGE
-> EHP8 FOR SAP ERP 6.0
-> IDES Version

5. Installation

Please use the standard Installation Guide to install the IDES system.
The installation procedure is more or less identical to the standard
installation.

6. Usage/User

The data of the IDES model company can be found in client 800. The
clients 810,811,812 are very small and contain examples for ALE
scenarios.
In the clients 000/001 you can logon with DDIC and SAP* with the
password you have defined at the beginning of the installation as
‘Master-Password‘, in the clients 8xx with the password 19920706 /
06071992 and in all clients with IDADMIN / ides
The system already contains more than 20 languages. Set the system profile parameter zcsa/installed_languages accordingly to use them.

7. Post Installation

After the succesful installation of the IDES system you have to install your own license using transaction SLICENSE.

8. Support

For IDES specific problems use component XX-IDES to create a customer message in the
SAP Service Marketplace: http://service.sap.com/message

For general installation problems use the standard components - for
example -  BC-INS-UNX

10. Last minute information

 

2432361 - IDES ERP 6.0 incl. EHP8

 

Symptom

IDES ERP 6.0 incl. EHP8

Other Terms

IDES ERP 6.0 incl. EHP8 / anydb

Reason and Prerequisites

IDES installation

Solution

Lösung

1 Terms Of Usage

Due to security reasons we strongly recommend that you do NOT install the IDES demo system in the same network as your productive environment. Please separate the demo environment from your productive environment.
Also we do not recommend that real master data (e.g. client copy of productive systems) is set up in the IDES system.

Please note that the IDES shipment is a service from SAP on a voluntary basis. It is not allowed to use IDES systems in production or as productive systems in order to generate revenue.

2. Components

The IDES installation package contains the following component:
  SAP ERP 6.0 ECC 6.0 - unicode (see attachment of installed versions)
It is the ABAP-AS which contains the data of the model company in client 800.

3. Hardware Requirements

DB-Sizes:

MSSQL: 250 GB

MAXDB: 600 GB

Oracle: 420 GB

DB6: 300 GB

SAP ASE: 300 GB

4. Download

Please note that a physical shipment of an IDES installation package is no longer possible.
Please download the installation media via the Software Download Center in the SAP Service Marketplace:
http://support.sap.com/swdc>
-> Installations and Upgrades
-> A - Z Index
-> E -> SAP ERP
-> SAP ERP ENHANCE PACKAGE
-> EHP8 FOR SAP ERP 6.0
-> IDES Version

5. Installation

Please use the standard Installation Guide to install the IDES system.
The installation procedure is more or less identical to the standard
installation.

6. Usage/User

The data of the IDES model company can be found in client 800. The
clients 810,811,812 are very small and contain examples for ALE
scenarios.
In the clients 000/001 you can logon with DDIC and SAP* with the
password you have defined at the beginning of the installation as
‘Master-Password‘, in the clients 8xx with the password 19920706 /
06071992 and in all clients with IDADMIN / ides123
The system already contains more than 20 languages. Set the system profile parameter zcsa/installed_languages accordingly to use them.

7. Post Installation

After the succesful installation of the IDES system you have to install your own license using transaction SLICENSE.

8. Support

For IDES specific problems use component XX-IDES to create a customer message in the
SAP Service Marketplace: http://service.sap.com/message

For general installation problems use the standard components - for
example -  BC-INS-UNX

9. Last minute information

- after the successful load-phase a warning will pop up ("Not all packages are loaded"). This can be ignored by chosing "Ok"