alien skin exposure 6怎么放在PS CS5滤镜里面，详细 详细，，详细哦

Posted 2023-04-08

一定得详细啊~~~~~~

参考技术A 如果是安装版 直接安装即可 再重启ps 就有了
如果是绿色版 直接把*.8bf文件拷贝到 你的ps安装目录的E:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\Filters 我的是E盘 64为ps 具体路径看你自己的来

Match-----Correlation-----find_ncc_model_exposure

* This example program shows how to use HALCON‘s correlation-based
* matching. In particular it demonstrates the robustness of this method against
* linear illumination changes. The training is performed in an image with good
* illumination. The matching is applied in images where the exposure time varies
* extremely from very short to very long.

********光照不均匀、明暗变化、且背景最好不能太复杂时用相关性匹配********
read_image (Image, ‘cap_exposure/cap_exposure_03‘)
get_image_size (Image, Width, Height)
dev_close_window ()
dev_open_window (0, 0, Width, Height, ‘black‘, WindowHandle)
dev_update_window (‘off‘)
dev_display (Image)
gen_circle (Circle, 246, 336, 150)
area_center (Circle, Area, RowRef, ColumnRef)
reduce_domain (Image, Circle, ImageReduced)
*create_ncc_model(Template : : NumLevels, AngleStart, AngleExtent, AngleStep, Metric : ModelID)
*Template指定模板的单通道图像:单通道灰度图像
*NumLevels指定最高金字塔等级：金字塔最大层数，层数越多（向下），搜索的越快，但精度下降
*AngleStart指定模板最小旋转角度：模板最小的旋转角度
*AngleExtent指定模板角度的扩展范围：模板旋转范围
*AngleStep指定步距：每次旋转角度的步长（步长越小，旋转次数越多，越耗时？）
*Metric指定匹配标准：极性 ignore_global_polarity：忽略全局极性（对比度不好的忽略）
*ModelID：句柄 即标示
create_ncc_model (ImageReduced, ‘auto‘, 0, 0, ‘auto‘, ‘use_polarity‘, ModelID)
dev_set_draw (‘margin‘)
dev_display (Image)
dev_display (Circle)
stop ()
Rows := []
Cols := []
for J := 1 to 10 by 1
*J$‘02‘ 表示此字符宽度为2，左边补0 J=1时为‘01’ J=2时为‘02’ 以此类推
read_image (Image, ‘cap_exposure/cap_exposure_‘ + J$‘02‘)
*find_ncc_model(Image : : ModelID, AngleStart, AngleExtent, MinScore, NumMatches, MaxOverlap, SubPixel, NumLevels : Row, Column, Angle, Score)
*在输入图像中查找指定数目的NCC模板实例
*Image : : ModelID, AngleStart, AngleExtent：同上
*MinScore指定模型查找得分阈值：0~1之间 越高越不容易被找到
*NumMatches：指定要查找的匹配实例的数目 0：缺省（都找）
*MaxOverlap：指定最大交叠系数 0~1之间 接近1两个模板冲动容易被找到 接近0模板重叠越不容易被找到
*SubPixel：指定是否要求亚像素精度匹配
*NumLevels：指定匹配的金字塔等级
*Row, Column, Angle, Score：输出查找到的模板实例的行坐标、列坐标、角度、得分（可能是一组或者多组） Angle指与水平的夹角
find_ncc_model (Image, ModelID, 0, 0, 0.5, 1, 0.5, ‘true‘, 0, Row, Column, Angle, Score)
* disp_circle (WindowHandle, Row, Column, 150)
vector_angle_to_rigid (RowRef, ColumnRef, 0, Row, Column, 0, HomMat2D)
*临近插值
affine_trans_region (Circle, RegionAffineTrans, HomMat2D, ‘nearest_neighbor‘)
***********注意语法***********
Rows := [Rows,Row]
Cols := [Cols,Column]
dev_display (Image)
dev_display (RegionAffineTrans)
stop ()
endfor
* Compute the standard deviation of the found positions. If the individual
* positions in Rows and Cols are examined, it can be seen that the standard
* deviation is caused mainly by the last four images, which are severely
* overexposed.
*求标准偏差
StdDevRows := deviation(Rows)
StdDevCols := deviation(Cols)
clear_ncc_model (ModelID)