CPEN400D 深度学习

Posted 2023-04-08 athsr70

CPEN400D: Deep Learning
Programming Assignment 2
Released: 2023 Mar. 24
In this assignment, you will implement a Transformer [1] architecture from scratch. A Colab
notebook is provided with this documentation, which you need to complete. Please pay attention
to the following notes:
The notebook is available at this link.
You are only allowed to modify the code inside the START/END blocks.
For each module, one test case is provided at the end of the notebook. You may use the
test cases to get a sense of how the input/output formats are, and as a sanity check for your
implementation. For each test case, your code must give a response within 10 seconds.
Make sure your code is readable (by leaving comments and writing self-commented code).
Unless otherwise specified, you are not allowed to use any module from torch.nn module.
For each subsection, there is a corresponding START/END block in the provided colab that
you need to fill in.
All the code must be written by yourself, and you are not allowed to copy any code from
other sources such as your classmates or the internet.
If you use ChatGPT or other LLMs to help finish the assignment, please clearly mark which
questions you use them. We may require you to submit your prompts. Please make sure you
store them properly.
1 Transformer
In this problem, we will implement a Transformer from scratch and train it on a toy task. The setup
of the problem is as follows: We are given training/validation/test sets of size Ntrain, Nval, Ntest,
respectively. Each dataset contains a set of strings consisting of four English alphabet characters
“c”,“p”,“e”, and “n”. The task is to verify if the sequence contains “cpen” as a contiguous substring
or not. For instance “ecpenp” contains this substring and has label 1, while “cpeeen” does not
contain the substring and has label 0. Each string si (1 ≤ i ≤ N) in each dataset contains sequences
of length n. For exact details of this task, you may refer to the implementation of SubstringDataset
in the notebook. An illustrative figure of this task is shown in Figure 1. Throughout this assignment,
we omit the batch size in the equations for simplicity but your implementations must take into
account the batch size.
1
UBC CPEN400D 2022 Winter Term 2 with Professor Renjie Liao Assignment 2
Transformer
[CLS] e c p e n
1
p
Figure 1: Substring matching using a Transformer. A string is first tokenized into a sequence of
characters. A “[CLS]” token is added to the beginning of the sequence. The sequence is encoded
and passed through a Transformer. Finally, the output of the “[CLS]” token is decoded as the class
label. The label is 1 if the string is matched, 0 otherwise.
Preprocessing and Tokenization
First, we need to convert our dataset, which is represented as string data, to a vectorized format.
To this end, we first need to break the string into small pieces. This process is called Tokenization.
Next, we have to convert each of the small pieces into a vectorized format, usable by a neural
network.
1.1 [10pts] Implement the tokenization and vectorization functionality in the Tokenizer class.
This function takes in a string, (1) splits the string, and returns a list of characters (or tokens
in Transformer terminology) (2) (optionally) add a “[CLS]” token to the beginning of the list
(later, we will see why we need this). (3) convert each token into a one-hot vector and return the
resulting matrix. For a string of length n, this function must return a row-wise one-hot matrix
X ∈ R(n+1)×dvoc where dvoc = 4 + 1 = 5 is the size of our token vocabulary.
Positional Encoding
The Transformer model is designed to process sequences of tokens, but it lacks any inherent under-
standing of the order or position of those tokens within the sequence. This means that the model
would treat the same sequence of tokens differently depending on their order within the input. To
overcome this limitation, the Transformer architecture introduces positional encoding.
Positional encoding is a way of adding information about the position of each token in the
sequence to the input embeddings before passing them through the Transformer layers. This allows
the model to distinguish between tokens based on their position in the sequence.
There are various forms of imposing positional encoding such as sinusoidal positional encoding
introduced in the original Transformer paper. Here, we will implement another version, which
is learnable positional encoding. The idea behind learnable positional encoding is to dedicate a
learnable vector to each position index i, instead of a fixed sinusoidal vector.
1.2 [5pts] Implement the (absolute) learnable positional encoding module. This module has a
learnable weight matrix Wpos ∈ RdmaxLen×dmodel . The i-th row (1 ≤ i ≤ dmaxLen) of this matrix is
2
UBC CPEN400D 2022 Winter Term 2 with Professor Renjie Liao Assignment 2
a learnable vector corresponding to the i-th position in a sequence. This module applies positional
encoding to a sequence by element-wise adding rows of this matrix to their corresponding position
in the input.
Multi-Head Attention
Attention is the key component of the Transformer, which we will implement next. Attention
allows the model to attend to different parts of the input sequence with different weights, enabling
it to capture complex relationships between the input tokens. This module consists of numHeads
heads, each head h consists of three weight matrices: WK,h,WQ,h,WV,h ∈ Rdmodel×dh , where
dh = dmodel/dh. Multi-head attention takes three matrices XK ,XQ,XV ∈ Rn×dmodel as input,
where n is the number of tokens. The computational mechanism of each head is as follows:
headh = Softmax,
where Sofotmax is a row-wise softmax operator. The result of each head is a n × dh matrix. To
merge the outputs of heads and obtain a final output of size n × dmodel, heads are concatenated
and multiplied by a weight matrix WO ∈ Rdmodel×dmodel :
Attention(XK ,XQ,XV ) = Concat(head1,head2, . . . ,headH)WO.
In this assignment (and in Transformer Encoder in general), we use Self-attention where XK =
XQ = XV = X are all the same matrices.
1.3 [20pts] Implement the multi-head attention module.
1.5 [5pts] An alternative way of imposing positional encoding in the Transformer is to apply it in
the attention Softmax operator. That is, modify the equation of each head as follows:. In each head, this positional
encoding adds a scalar value of mi?j,h to the attention score of each pair of tokens with indices
i, j (1 ≤ i, j ≤ n). Since in this positional encoding, only the relative position of each pair of tokens
is important, this positional encoding is called Relative Positional Encoding (RPE). Implement
relative positional encoding (RPE) in the multi-head attention module.
3
UBC CPEN400D 2022 Winter Term 2 with Professor Renjie Liao Assignment 2
Transformer Backbone
Next, we will proceed with the implementation of Transformer layers and model. Each layer of the
transformer contains four components: self-attention, feed-forward layer, and normalization. The
feed-forward layer is a two-layer fully connected network with ReLU activation. It contains two
weight matrices W1 ∈ Rdmodel×4dmodel ,W2 ∈ R4dmodel×dmodel , and its output is given by:
FC(X) = ReLU(XW1)W2.
1.4 [15pts] Implement the transformer layer module. The prenorm parameter determines whether
the transformer layer is Pre-Norm or Post-Norm.
1.5 [15pts] Implement the transformer model module. This module contains an encoder, nLayers
layers of transformer layer, and a decoder. The encoder weightWenc ∈ Rdinput×dmodel is a linear layer
that takes in tokens of dimension dinput = dvocab and encodes each of them into a high-dimensional
space of dmodel. After applying the required layers of the Transformer layer, the decoder weight
matrix Wdec ∈ Rdmodel×dout decodes each token from a high-dimensional space into the output
space.
Optimization Scheduling
Next, we implement the optimizer and its scheduler. We choose Adam optimizer as the optimizer.
Transformers often require warm-up and cool-down scheduling for stable training and better/faster
generalization. That is, in the early steps of optimization, the learning rate is gradually increased
from zero to the base learning rate, and in the final stages of optimization, the learning rate is
decreased to zero again. Here, we implement a simple scheduler with linear warmup and cooldown.
1.6 [5pts] Implement a scheduler with warmUp warmup steps and maxSteps total number of steps.
In other words, your scheduler must return a zero learning rate at step 0, increase the learning rate
linearly to lr until step warmUp, and decrease it again linearly to zero until step maxSteps.
Train Substring Matching
Finally, we have all the pieces necessary to train a substring matching model using the Transformer
architecture. The Trainer class contains a minimal training and evaluation procedure for this task.
1.7 [15pts] Implement the loss computation function in the Trainer class. The Transformer contains
n output vectors for input with n tokens. However, our task is to have a single output for the entire
sequence (i.e. the label). Hence, we have added a dummy token called “[CLS]” token, and will only
look at the output of this token to compute the loss and accuracy. The loss/accuracy computation
function should compute the predicted label, and binary cross entropy with the ground truth labels,
and return both the loss and accuracy for a given batch. You may use the cross entropy loss function
from PyTorch to compute loss.
1.8 [10pts] Run the training procedure to make sure your code is correct and the model trains
properly. In case you were not successful in implementing some of the previous parts, you may use
a module from PyTorch (e.g., Attention, Transformer, etc) to implement this part and receive the
full points for this part. If you have implemented everything correctly, your code should achieve
close to perfect accuracy on the test set.

WX：codehelp mailto: [e-mail]

什么是深度学习？深度学习能用来做什么？

深度学习是基于机器学习延伸出来的一个新的领域，由以人大脑结构为启发的神经网络算法为起源加之模型结构深度的增加发展，并伴随大数据和计算能力的提高而产生的一系列新的算法。
在深度学习中，计算机模型学习直接从图像、文本或声音中执行分类任务。深度学习模式可以达到新的精确度，有时甚至超过人类的表现。大多数深度学习方法使用神经网络的架构，这也是深度学习模型通常被称为深度神经网络的原因。 参考技术A 深度学习是机器学习的分支，是一种以人工神经网络为架构，对数据进行表征学习的算法。至今已有数种深度学习框架，如深度神经网络、卷积神经网络和深度置信网络和递归神经网络已被应用在计算机视觉、语音识别、自然语言处理、音频识别与生物信息学等领域并获取了极好的效果。 参考技术B 深度学习就是完全沉浸进去。还有就是能够读到书本里面更深刻的意思。而不是浮于表面。学习之后有属于自己的思考。 参考技术C 深度学习应该就是沉浸入学习，能够仔细的钻研学习中的问题吧。
深入学习能让你更加的了解知识，能让你更加的了解问题原因。