linux 搭建stm32的makefile 怎么写

Posted 2023-03-29

参考技术A 一 STM 32 GCC 安装
stm32 属于arm cortex-m系列thumb指令集,所以给arm用的arm-none-eabi就可以了,首先是下载
下载地址:
https://launchpad.net/gcc-arm-embedded/+download
下载其中的gcc-arm-none-eabi-version-linux.tar.bz2
解压到你知道的目录会产生
gcc-arm-none-eabi的文件夹
把该编译器添加到你的环境中:

sudo gedit ~/.bashrc

在最后一行添加:

export PATH=$PATH:/your_stm_gcc_dir/gcc-arm-none-eabi-4_8-2013q4/bin

因为我之前有添加过树莓派的编译器了,所以实际上是这样的:
export PATH=$PATH:/your_pi_gcc_dir/tools-master/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/:/your_stm_gcc_dir/gcc-arm-none-eabi-4_8-2013q4/bin

两个编译器环境中间用冒号隔开;
注销后测试:

arm-none-eabi-gcc -v

可以查看到该编译器的版本,就表示可以了.

二 工程环境的建立

新建个工程文件夹,及其目录
mkdir stm_project
cd stm_project
mkdir libs
mkdir src
mkdir inc

下载,安装官方库:
stm32的寄存器不像51 avr等单片机,那么少,自己写写库,背背寄存器就可以了,所以ST公司提供了他们官方的库,为了避免重复造轮子,就直接采用他们的库,库版本为STM32_USB-FS-Device_Lib_V4.0.0,这个库多了usb支持,下载的话到st官网搜索stm32f10x就有了.
下载链接:
stsw-stm32121.zip

解压,把解压好的文件夹复制到刚才新建的libs里面.
在工程根目录下新建Makefile.common文件,这个为通用makefile

# include Makefile

#This file is included in the general Makefile, the libs Makefile and the src Makefile
#Different optimize settings for library and source files can be realized by using arguments
#Compiler optimize settings:
# -O0 no optimize, reduce compilation time and make debugging produce the expected results (default).
# -O1 optimize, reduce code size and execution time, without much increase of compilation time.
# -O2 optimize, reduce code execution time compared to ‘O1’, increase of compilation time.
# -O3 optimize, turns on all optimizations, further increase of compilation time.
# -Os optimize for size, enables all ‘-O2’ optimizations that do not typically increase code size and other code size optimizations.
#Recommended optimize settings for release version: -O3
#Recommended optimize settings for debug version: -O0
#Valid parameters :
# OptLIB=0 --> optimize library files using the -O0 setting
# OptLIB=1 --> optimize library files using the -O1 setting
# OptLIB=2 --> optimize library files using the -O2 setting
# OptLIB=3 --> optimize library files using the -O3 setting
# OptLIB=s --> optimize library files using the -Os setting
# OptSRC=0 --> optimize source files using the -O0 setting
# OptSRC=1 --> optimize source files using the -O1 setting
# OptSRC=2 --> optimize source files using the -O2 setting
# OptSRC=3 --> optimize source files using the -O3 setting
# OptSRC=s --> optimize source files using the -Os setting
# all --> build all
# libs --> build libs only
# src --> build src only
# clean --> clean project
# tshow --> show optimize settings
#Example:
# make OptLIB=3 OptSRC=0 all tshow

TOP=$(shell readlink -f "$(dir $(lastword $(MAKEFILE_LIST)))")
PROGRAM=main
LIBDIR=$(TOP)/libs

#Adust the following line to the library in use
#=========add by embbnux 根据你的库不同,调整这个地方的库目录地址====================#
STMLIB=$(LIBDIR)/STM32_USB-FS-Device_Lib_V4.0.0/Libraries
#=========add by embbnux 根据你的stm32芯片型号容量不同,修改这个地方的TypeOfMCU=======#
#Adjust TypeOfMCU in use, see CMSIS file "stm32f10x.h"#STM32F103RBT (128KB FLASH, 20KB RAM) --> STM32F10X_MD#TypeOfMCU=STM32F10X_MD#STM32F103RET (512KB FLASH, 64KB RAM) --> STM32F10X_HD#STM32F103ZET (512KB FLASH, 64KB RAM) --> STM32F10X_HD
#============================================================================#
TypeOfMCU=STM32F10X_HD
#============================================================================#
TC=arm-none-eabi
CC=$(TC)-gcc
LD=$(TC)-ld -v
OBJCOPY=$(TC)-objcopy
AR=$(TC)-ar
GDB=$(TC)-gdb
INCLUDE=-I$(TOP)/inc
INCLUDE+=-I$(STMLIB)/CMSIS/Include
INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F10x/Include
INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F10x/Source/Templates
INCLUDE+=-I$(STMLIB)/STM32F10x_StdPeriph_Driver/inc
INCLUDE+=-I$(STMLIB)/STM32_USB-FS-Device_Driver/inc
COMMONFLAGS=-g -mcpu=cortex-m3 -mthumb
COMMONFLAGSlib=$(COMMONFLAGS)
#Commands for general Makefile and src Makefile
ifeq ($(OptSRC),0)
COMMONFLAGS+=-O0
InfoTextSrc=src (no optimize, -O0)
else ifeq ($(OptSRC),1)
COMMONFLAGS+=-O1
InfoTextSrc=src (optimize time+ size+, -O1)
else ifeq ($(OptSRC),2)
COMMONFLAGS+=-O2
InfoTextSrc=src (optimize time++ size+, -O2)
else ifeq ($(OptSRC),s)
COMMONFLAGS+=-Os
InfoTextSrc=src (optimize size++, -Os)
else
COMMONFLAGS+=-O3
InfoTextSrc=src (full optimize, -O3)
endif
CFLAGS+=$(COMMONFLAGS) -Wall -Werror $(INCLUDE)
CFLAGS+=-D $(TypeOfMCU)
CFLAGS+=-D VECT_TAB_FLASH

#Commands for libs Makefile
ifeq ($(OptLIB),0)
COMMONFLAGSlib+=-O0
InfoTextLib=libs (no optimize, -O0)
else ifeq ($(OptLIB),1)
COMMONFLAGSlib+=-O1
InfoTextLib=libs (optimize time+ size+, -O1)
else ifeq ($(OptLIB),2)
COMMONFLAGSlib+=-O2
InfoTextLib=libs (optimize time++ size+, -O2)
else ifeq ($(OptLIB),s)
COMMONFLAGSlib+=-Os
InfoTextLib=libs (optimize size++, -Os)
else
COMMONFLAGSlib+=-O3
InfoTextLib=libs (full optimize, -O3)
endif
CFLAGSlib+=$(COMMONFLAGSlib) -Wall -Werror $(INCLUDE)
CFLAGSlib+=-D $(TypeOfMCU)
CFLAGSlib+=-D VECT_TAB_FLASH本回答被提问者采纳