实现自己的HAL-9 控制led（驱动），从app 到 hal 到底层内核kernel层的驱动 的实现

Posted 2022-12-14 杨斌并

控制led，从app 到 hal 到底层内核kernel层的驱动 的实现（一）

led 驱动

• 设备树的修改
• Z:\\itop-3399_8.1\\kernel\\arch\\arm64\\boot\\dts\\rockchip\\itop-3399.dtsi 文件 添加自己的test_led 节点

	/*
	itop_led 
        compatible = "itop_led";
		pinctrl-names = "default";
        pinctrl-0 = <&led1_ctl>;
        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
		status = "okay";
	;
	*/
	
	test_led 
        compatible = "itop_led_test_let";
		pinctrl-names = "default";
        pinctrl-0 = <&led1_ctl>;
        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
		status = "okay";
	;

• led_test.c (驱动代码)

#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>

struct device_node *test_device_node;
int beep_gpio = 0;
#define CMD_TEST2 _IOW('L', 0, int)
#define CMD_TEST3 _IOW('L', 1, int)

int beep_remove(struct platform_device *pdev)
    printk("beep_remove \\n");
    return 0;



struct of_device_id of_match_table[] = 

    .compatible = "itop_led_test_let",
    

;

int misc_open(struct inode * inode, struct file * file)
    printk("hello misc_open \\n");
    return 0;  


int misc_release(struct inode * inode, struct file * file)
    printk("hello misc_release bye bye \\n");
    return 0;





int misc_write(struct file * file, const char __user * ubuf, size_t size, loff_t * loff_t)
    char kbuf[64] = 0;
    printk("hello misc_write \\n");

    if (copy_from_user(kbuf, ubuf, size) != 0)
    

        printk("copy_from_to_user error \\n");
        return -1;
    
    

    printk("kbuf is %s \\n", kbuf);


    if (kbuf[0] == 1)
        gpio_set_value(beep_gpio, 1);
    else if (kbuf[0] == 0)
    
        gpio_set_value(beep_gpio, 0);
    
    
    return 0;





int misc_read(struct file* file, char __user * ubuf, size_t size, loff_t * loff_t)

    char kbuf[64] = "heheh_read";

    printk("hello misc_read \\n");

    if(copy_to_user(ubuf, kbuf, strlen(kbuf)) != 0 )
        printk("copy_to_user error \\n");
        return -1;
    
    
    return 0;




static long misc_ioctl(struct file *file, unsigned int cmd, unsigned long value)
    
    printk("misc_ioctl cmd is %d \\n", cmd);
    printk("misc_ioctl value is %d \\n", value);

    switch (cmd)
        
        case CMD_TEST2:
            gpio_set_value(beep_gpio, 0);
            printk("misc_ioctl value: %d\\n",value);
            break;

        case CMD_TEST3:
            gpio_set_value(beep_gpio, 1);
            printk("misc_ioctl value: %d\\n",value);
            break;
        
        default:
            break;
    


    return  0;




struct file_operations misc_fops =

    .owner = THIS_MODULE,
    .open = misc_open,
    .release = misc_release,
    .read = misc_read,
    .write = misc_write,
    .unlocked_ioctl = misc_ioctl,
    .compat_ioctl = misc_ioctl
;

struct miscdevice misc_dev = 

    .minor = MISC_DYNAMIC_MINOR,
    .name = "hello_led",
    .fops = &misc_fops
;


const struct platform_device_id  beep_id_table = 
    .name = "beep_test"
;


int beep_probe(struct platform_device *pdev)
    int ret;
     printk("beep_probe \\n");

     printk("node name is %s \\n", pdev->dev.of_node->name);
     test_device_node = pdev->dev.of_node;
     
    beep_gpio = of_get_named_gpio(test_device_node, "gpios", 0);

    if (beep_gpio <0)
    
       printk("of_get_named_gpio error \\n");
       return -1;
    


    printk("beep_gpio: %d\\n", beep_gpio);

    ret = gpio_request(beep_gpio, "beep");
    
    if ( ret <0 )
    
        printk("gpio_request is error \\n");
        return -1;
    

    gpio_direction_output(beep_gpio, 1);

    
    ret = misc_register(&misc_dev);

    if (ret <0)
    
        printk("misc_registe is error \\n");
        return 0;
    

    printk("misc_registe is success \\n");


    return 0;



struct platform_driver beep_device =

    .probe = beep_probe,
    .remove = beep_remove,
    .driver = 
        .name = "1234",
        .owner = THIS_MODULE,
        .of_match_table = of_match_table
    ,
    .id_table = &beep_id_table
;

static int beep_driver_init(void)

    int ret = 0;

    printk("beep_driver_init \\n");

    ret = platform_driver_register(&beep_device);


    return 0;


static void beep_driver_exit(void)

       printk("beep_driver_exit \\n");
       printk("misc_registe is error \\n");
       gpio_free(beep_gpio);
       misc_deregister(&misc_dev);
       platform_driver_unregister(&beep_device);



module_init(beep_driver_init);
module_exit(beep_driver_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("LIYU");

• 然后安装到内核
  驱动是否编写正确请看 内核篇 led驱动及app（没有hal）
  驱动怎么编译到内核请看 Linux下把驱动编译进内核 -5

• 然后编译kernel 生成 kernel.img 和 resource.img

• 将kernel.img 和 resource.img 刷到开发版

• 内核成功打印以下信息说明内核编译成功

显示hello_led 说明成功
成功生成dev/hello_led节点