tendermint state分析
Posted 小圣.
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了tendermint state分析相关的知识，希望对你有一定的参考价值。
概述
- state是共识引擎最新提交区块的一个简单描述，它包含了验证一个区块所有的必要信息，例如验证者集合、共识参数。
- state并不会在网络中进行传播。
- 对state进行操作时，应该使用state.Copy() 或者updateState()。
state
type State struct
// 共识版本
Version Version
// ChainID和InitialHeight的默认值都在创世块配置文件中进行配置。
// 并且在整个链中都不应该变化
ChainID string
InitialHeight int64 // should be 1, not 0, when starting from height 1
// LastBlockHeight=0 at genesis (ie. block(H=0) does not exist)
// 上一个区块的高度
LastBlockHeight int64
// 上一个区块的ID
LastBlockID types.BlockID
// 上一个区块的时间
LastBlockTime time.Time
// LastValidators is used to validate block.LastCommit.
// Validators are persisted to the database separately every time they change,
// so we can query for historical validator sets.
// Note that if s.LastBlockHeight causes a valset change,
// we set s.LastHeightValidatorsChanged = s.LastBlockHeight + 1 + 1
// Extra +1 due to nextValSet delay.
NextValidators *types.ValidatorSet
// 代表当前验证者集合
Validators *types.ValidatorSet
// 上一个区块验证者集合
LastValidators *types.ValidatorSet
LastHeightValidatorsChanged int64
// 共识参数的设置, 主要是一个区块大小、一个交易大小、区块每个部分的大小
ConsensusParams types.ConsensusParams
LastHeightConsensusParamsChanged int64
// Merkle root of the results from executing prev block
LastResultsHash []byte
// the latest AppHash we've received from calling abci.Commit()
AppHash []byte
execution
execution处理区块的提交和状态的更新，它暴露了ApplyBlock()去验证和处理区块。然后提交和更新交易池，最后保存区块的state。
下面我们就看一下ApplyBlock。
ApplyBlock
它是唯一需要从这个包外部调用来处理和提交整个区块的函数。ApplyBlock的主要功能有：
- 根据当前状态和区块内容来验证当前区块是否符合要求
- 提交区块内容到ABCI的应用层, 返回应用层的回应
- 根据当前区块的信息，ABCI回应的内容，生成下一个State
- 再次调用ABCI的Commit返回当前APPHASH
- 持久化此处状态同时返回下一次状态的内容
func (blockExec *BlockExecutor) ApplyBlock(
state State, blockID types.BlockID, block *types.Block,
) (State, int64, error)
// 对区块进行详细验证
if err := validateBlock(state, block); err != nil
return state, 0, ErrInvalidBlock(err)
startTime := time.Now().UnixNano()
// 将区块内容提交给ABCI应用层、返回ABCI返回的结果
abciResponses, err := execBlockOnProxyApp(
blockExec.logger, blockExec.proxyApp, block, blockExec.store, state.InitialHeight,
)
endTime := time.Now().UnixNano()
blockExec.metrics.BlockProcessingTime.Observe(float64(endTime-startTime) / 1000000)
if err != nil
return state, 0, ErrProxyAppConn(err)
fail.Fail() // XXX
// 在提交前保存结果
if err := blockExec.store.SaveABCIResponses(block.Height, abciResponses); err != nil
return state, 0, err
fail.Fail() // XXX
// validate the validator updates and convert to tendermint types
abciValUpdates := abciResponses.EndBlock.ValidatorUpdates
err = validateValidatorUpdates(abciValUpdates, state.ConsensusParams.Validator)
if err != nil
return state, 0, fmt.Errorf("error in validator updates: %v", err)
validatorUpdates, err := types.PB2TM.ValidatorUpdates(abciValUpdates)
if err != nil
return state, 0, err
if len(validatorUpdates) > 0
blockExec.logger.Debug("updates to validators", "updates", types.ValidatorListString(validatorUpdates))
// 通过block和客户端的响应来更新state
state, err = updateState(state, blockID, &block.Header, abciResponses, validatorUpdates)
if err != nil
return state, 0, fmt.Errorf("commit failed for application: %v", err)
// 调用ABCI的commit函数，返回APPHash，同时更新内存池中的交易
appHash, retainHeight, err := blockExec.Commit(state, block, abciResponses.DeliverTxs)
if err != nil
return state, 0, fmt.Errorf("commit failed for application: %v", err)
// 更新证据池的内容
blockExec.evpool.Update(state, block.Evidence.Evidence)
fail.Fail() // XXX
// Update the app hash and save the state.
state.AppHash = appHash
// 将此次状态的内容持久化保存
if err := blockExec.store.Save(state); err != nil
return state, 0, err
fail.Fail() // XXX
// Events are fired after everything else.
// NOTE: if we crash between Commit and Save, events wont be fired during replay
fireEvents(blockExec.logger, blockExec.eventBus, block, abciResponses, validatorUpdates)
return state, retainHeight, nil
下面看一些ApplyBlock中调用的函数
validateBlock
验证区块
func validateBlock(state State, block *types.Block) error
// 先对区块数据结构进行验证 看看是否参数都已经正确
if err := block.ValidateBasic(); err != nil
return err
// 验证基本的信息
if block.Version.App != state.Version.Consensus.App ||
block.Version.Block != state.Version.Consensus.Block
return fmt.Errorf("wrong Block.Header.Version. Expected %v, got %v",
state.Version.Consensus,
block.Version,
)
// 验证链ID 高度 上一个区块ID 区块交易的数量
if block.ChainID != state.ChainID
return fmt.Errorf("wrong Block.Header.ChainID. Expected %v, got %v",
state.ChainID,
block.ChainID,
)
if state.LastBlockHeight == 0 && block.Height != state.InitialHeight
return fmt.Errorf("wrong Block.Header.Height. Expected %v for initial block, got %v",
block.Height, state.InitialHeight)
if state.LastBlockHeight > 0 && block.Height != state.LastBlockHeight+1
return fmt.Errorf("wrong Block.Header.Height. Expected %v, got %v",
state.LastBlockHeight+1,
block.Height,
)
// Validate prev block info.
if !block.LastBlockID.Equals(state.LastBlockID)
return fmt.Errorf("wrong Block.Header.LastBlockID. Expected %v, got %v",
state.LastBlockID,
block.LastBlockID,
)
// Validate app info
if !bytes.Equal(block.AppHash, state.AppHash)
return fmt.Errorf("wrong Block.Header.AppHash. Expected %X, got %v",
state.AppHash,
block.AppHash,
)
hashCP := state.ConsensusParams.HashConsensusParams()
if !bytes.Equal(block.ConsensusHash, hashCP)
return fmt.Errorf("wrong Block.Header.ConsensusHash. Expected %X, got %v",
hashCP,
block.ConsensusHash,
)
if !bytes.Equal(block.LastResultsHash, state.LastResultsHash)
return fmt.Errorf("wrong Block.Header.LastResultsHash. Expected %X, got %v",
state.LastResultsHash,
block.LastResultsHash,
)
// LastValidators 表示上次的所有验证者合集
if !bytes.Equal(block.ValidatorsHash, state.Validators.Hash())
return fmt.Errorf("wrong Block.Header.ValidatorsHash. Expected %X, got %v",
state.Validators.Hash(),
block.ValidatorsHash,
)
if !bytes.Equal(block.NextValidatorsHash, state.NextValidators.Hash())
return fmt.Errorf("wrong Block.Header.NextValidatorsHash. Expected %X, got %v",
state.NextValidators.Hash(),
block.NextValidatorsHash,
)
// Validate block LastCommit.
if block.Height == state.InitialHeight
if len(block.LastCommit.Signatures) != 0
return errors.New("initial block can't have LastCommit signatures")
else
// 注意这个地方 我们是根据此次提交的区块信息 来验证上一个块的内容
// 迭代上一个区块保存的所有验证者 确保每一个验证者签名正确
// 最后确认所有的有效的区块验证者的投票数要大于整个票数的2/3
if err := state.LastValidators.VerifyCommit(
state.ChainID, state.LastBlockID, block.Height-1, block.LastCommit); err != nil
return err
// NOTE: We can't actually verify it's the right proposer because we don't
// know what round the block was first proposed. So just check that it's
// a legit address and a known validator.
// The length is checked in ValidateBasic above.
if !state.Validators.HasAddress(block.ProposerAddress)
return fmt.Errorf("block.Header.ProposerAddress %X is not a validator",
block.ProposerAddress,
)
// Validate block Time
switch
case block.Height > state.InitialHeight:
if !block.Time.After(state.LastBlockTime)
return fmt.Errorf("block time %v not greater than last block time %v",
block.Time,
state.LastBlockTime,
)
medianTime := MedianTime(block.LastCommit, state.LastValidators)
if !block.Time.Equal(medianTime)
return fmt.Errorf("invalid block time. Expected %v, got %v",
medianTime,
block.Time,
)
case block.Height == state.InitialHeight:
genesisTime := state.LastBlockTime
if !block.Time.Equal(genesisTime)
return fmt.Errorf("block time %v is not equal to genesis time %v",
block.Time,
genesisTime,
)
default:
return fmt.Errorf("block height %v lower than initial height %v",
block.Height, state.InitialHeight)
// Check evidence doesn't exceed the limit amount of bytes.
if max, got := state.ConsensusParams.Evidence.MaxBytes, block.Evidence.ByteSize(); got > max
return types.NewErrEvidenceOverflow(max, got)
return nil
execBlockOnProxyApp
execBlockOnProxyApp函数是向ABCI提交信息, 它将返回一系列交易和Validator的集合
func execBlockOnProxyApp(
logger log.Logger,
proxyAppConn proxy.AppConnConsensus,
block *types.Block,
store Store,
initialHeight int64,
) (*tmstate.ABCIResponses, error)
var validTxs, invalidTxs = 0, 0
txIndex := 0
// 首先构建Response
abciResponses := new(tmstate.ABCIResponses)
dtxs := make([]*abci.ResponseDeliverTx, len(block.Txs))
abciResponses.DeliverTxs = dtxs
// 回调函数，在提交每一个交易给ABCI之后 然后在调用此函数
// 这个回调只是统计了哪些交易在应用层被任务是无效的交易
// 从这里我们也可以看出来 应用层无论决定提交的交易是否有效 tendermint都会将其打包到区块链中
proxyCb := func(req *abci.Request, res *abci.Response)
if r, ok := res.Value.(*abci.Response_DeliverTx); ok
// TODO: make use of res.Log
// TODO: make use of this info
// Blocks may include invalid txs.
txRes := r.DeliverTx
if txRes.Code == abci.CodeTypeOK
validTxs++
else
logger.Debug("invalid tx", "code", txRes.Code, "log", txRes.Log)
invalidTxs++
abciResponses.DeliverTxs[txIndex] = txRes
txIndex++
proxyAppConn.SetResponseCallback(proxyCb)
// 从区块中加载出整个验证者和错误验证者
commitInfo := getBeginBlockValidatorInfo(block, store, initialHeight)
byzVals := make([]abci.Evidence, 0)
for _, evidence := range block.Evidence.Evidence
byzVals = append(byzVals, evidence.ABCI()...)
ctx := context.Background()
// Begin block
var err error
pbh := block.Header.ToProto()
if pbh == nil
return nil, errors.New("nil header")
// 开始调用ABCI的BeginBlock 同时向其提交区块hash 区块头信息 上一个区块的验证者 出错的验证者
abciResponses.BeginBlock, err = proxyAppConn.BeginBlockSync(
ctx,
abci.RequestBeginBlock
Hash: block.Hash(),
Header: *pbh,
LastCommitInfo: commitInfo,
ByzantineValidators: byzVals,
,
)
if err != nil
logger.Error("error in proxyAppConn.BeginBlock", "err", err)
return nil, err
// 迭代提交每一个交易给应用层
for _, tx := range block.Txs
_, err = proxyAppConn.DeliverTxAsync(ctx, abci.RequestDeliverTxTx: tx)
if err != nil
return nil, err
// 通知ABCI应用层此次区块已经提交完毕了 注意这个步骤是可以更新验证者的 更新的验证者也就是下一个区块的所有验证者
abciResponses.EndBlock, err = proxyAppConn.EndBlockSync(ctx, abci.RequestEndBlockHeight: block.Height)
if err != nil
logger.Error("error in proxyAppConn.EndBlock", "err", err)
return nil, err
logger.Info("executed block", "height", block.Height, "num_valid_txs", validTxs, "num_invalid_txs", invalidTxs)
return abciResponses, nil
updateState
与应用层交互过后，就需要更新state了
func updateState(
state State,
blockID types.BlockID,
header *types.Header,
abciResponses *tmstate.ABCIResponses,
validatorUpdates []*types.Validator,
) (State, error)
// Copy the valset so we can apply changes from EndBlock
// and update s.LastValidators and s.Validators.
nValSet := state.NextValidators.Copy()
// 根据abciResponses返回的验证者来更新当前的验证者集合
// 更新原则是这样：
// 如果当前不存在则直接加入一个验证者
// 如果当前存在并且投票权为0则删除
// 如果当前存在其投票权不为0则更新
lastHeightValsChanged := state.LastHeightValidatorsChanged
if len(validatorUpdates) > 0
err := nValSet.UpdateWithChangeSet(validatorUpdates)
if err != nil
return state, fmt.Errorf("error changing validator set: %v", err)
// Change results from this height but only applies to the next next height.
lastHeightValsChanged = header.Height + 1 + 1
// Update validator proposer priority and set state variables.
nValSet.IncrementProposerPriority(1)
// 根据返回结果更新一下共识参数
nextParams := state.ConsensusParams
lastHeightParamsChanged := state.LastHeightConsensusParamsChanged
if abciResponses.EndBlock.ConsensusParamUpdates != nil
// NOTE: must not mutate s.ConsensusParams
nextParams = state.ConsensusParams.UpdateConsensusParams(abciResponses.EndBlock.ConsensusParamUpdates)
err := nextParams.ValidateConsensusParams()
if err != nil
return state, fmt.Errorf("error updating consensus params: %v", err)
state.Version.Consensus.App = nextParams.Version.AppVersion
// Change results from this height but only applies to the next height.
lastHeightParamsChanged = header.Height + 1
nextVersion := state.Version
//返回此次区块被验证成功之后的State 此State也就是为了验证下一个区块
//注意APPHASH还没有更新 因为还有一步没有做
return State
Version: nextVersion,
ChainID: state.ChainID,
InitialHeight: state.InitialHeight,
LastBlockHeight: header.Height,
LastBlockID: blockID,
LastBlockTime: header.Time,
NextValidators: nValSet,
Validators: state.NextValidators.Copy(),
LastValidators: state.Validators.Copy(),
LastHeightValidatorsChanged: lastHeightValsChanged,
ConsensusParams: nextParams,
LastHeightConsensusParamsChanged: lastHeightParamsChanged,
LastResultsHash: ABCIResponsesResultsHash(abciResponses),
AppHash: nil,
, nil
Save
将state进行持久化
func (store dbStore) save(state State, key [tendermint 101