ESP32 MicroPython开发之旅设备篇⑦ —— dht11 OLED ssd1306，简单上手

Posted 2022-01-26 单片机菜鸟爱学习

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了ESP32 MicroPython开发之旅设备篇⑦ —— dht11 OLED ssd1306，简单上手相关的知识，希望对你有一定的参考价值。

dht11 OLED ssd1306，简单上手

忘记过去，超越自己

❤️博客主页单片机菜鸟哥，一个野生非专业硬件IOT爱好者❤️
🎉欢迎关注🔎点赞👍收藏⭐️留言📝
🙏此博客均由博主单独编写，不存在任何商业团队运营，如发现错误，请留言轰炸哦！及时修正！感谢支持！
🔥Arduino ESP8266教程累计帮助过超过1W+同学入门学习硬件网络编程，入选过选修课程，刊登过无线电杂志🔥

DHT11 和 DHT22

Dht11和 dht22传感器用于测量温度（temperature）和相对湿度（relative humidity）

🎉MicroPython 内置库

MicroPython本身内置了dht模块，支持DHT11、DHT22。

在Shell里面分别输入：

>>> import dht
>>> help(dht)
>>> from machine import Pin
>>> sensor = dht.DHT11(Pin(14))
>>> help(sensor)

主要有四个步骤：

创建dht实例
开始测量
读取温度
读取湿度

🔎创建dht实例 —— dht.DHT11(Pin)

# 从machine引入Pin模块
from machine import Pin
# 引入dht模块
import dht

# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

🔎开始测量 —— sensor.measure()

# 从machine引入Pin模块
from machine import Pin
# 引入dht模块
import dht

# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

sensor.measure()

🔎读取温度 —— sensor.temperature()

# 从machine引入Pin模块
from machine import Pin
# 引入dht模块
import dht

# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

sensor.measure()
sensor.temperature()

🔎读取湿度 —— sensor.humidity()

# 从machine引入Pin模块
from machine import Pin
# 引入dht模块
import dht

# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

sensor.measure()
sensor.temperature()
sensor.humidity()

🎉测试代码，Shell打印当前温湿度

🔎电路连线

dht11	ESP32
Vin	5V
GND	GND
Data	GPIO14

🔎测试代码

# 从machine引入Pin模块
from machine import Pin
# 引入dht模块
import dht
# 引入睡眠方法
from time import sleep

# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

print('dht11_test')

# 不断读取温湿度
while True:
  try:
    # 睡眠10s  
    sleep(10)
    # 开始测量
    sensor.measure()
    # 读取温度
    temp = sensor.temperature()
    # 读取湿度
    hum = sensor.humidity()
    temp_f = temp * (9/5) + 32.0
    print('Temperature: %3.1f C' %temp)
    print('Temperature: %3.1f F' %temp_f)
    print('Humidity: %3.1f %%' %hum)
  except OSError as e:
    print('Failed to read sensor.')

🔎测试结果

>>> %Run -c $EDITOR_CONTENT
dht11_test
Temperature: 20.0 C
Temperature: 68.0 F
Humidity: 62.0 %
Temperature: 21.0 C
Temperature: 69.8 F
Humidity: 63.0 %
Temperature: 21.0 C
Temperature: 69.8 F
Humidity: 62.0 %

当前广州2022年1月1号的室内温湿度。

🎉测试代码，OLED1306显示DHT11当前温湿度

🔎电路连线

dht11	ESP32
Vin	5V
GND	GND
Data	GPIO14

OLED	ESP32
Vin	3.3V
GND	GND
SCL	GPIO5
SDA	GPIO4

关于ssd1306的讲解，请参考上一篇 ESP32 MicroPython开发之旅设备篇⑥ —— OLED ssd1306，简单上手，支持中英文数字

🔎测试代码

# 从machine模块导入I2C、Pin子模块
from machine import I2C,Pin
# 引入dht模块
import dht
# 引入睡眠方法
from time import sleep
# 从ssd1306模块中导入SSD1306_I2C子模块
from lib_ssd1306 import SSD1306_I2C

def chinese(ch_str, x_axis, y_axis): 
   offset_ = 0 
   y_axis = y_axis*8  # 中文高度一行占8个  
   x_axis = (x_axis*16)  # 中文宽度占16个 
   for k in ch_str: 
       code = 0x00  # 将中文转成16进制编码 
       data_code = k.encode("utf-8") 
       code |= data_code[0] << 16 
       code |= data_code[1] << 8
       code |= data_code[2]
       byte_data = fonts[code]
       for y in range(0, 16):
           a_ = bin(byte_data[y]).replace('0b', '')
           while len(a_) < 8:
               a_ = '0'+a_
           b_ = bin(byte_data[y+16]).replace('0b', '')
           while len(b_) < 8:
               b_ = '0'+b_
           for x in range(0, 8):
               oled.pixel(x_axis+offset_+x, y+y_axis, int(a_[x]))   
               oled.pixel(x_axis+offset_+x+8, y+y_axis, int(b_[x]))   
       offset_ += 16

# 中文字库 UTF-8 从 https://www.qqxiuzi.cn/bianma/guojima.php 获取
fonts= 
    0xE58D95:
    [0x10,0x08,0x04,0x3F,0x21,0x21,0x3F,0x21,0x21,0x3F,0x01,0x01,0xFF,0x01,0x01,0x01,
     0x10,0x20,0x40,0xF8,0x08,0x08,0xF8,0x08,0x08,0xF8,0x00,0x00,0xFE,0x00,0x00,0x00],#"单"
    0xE78987:
    [0x00,0x10,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x20,0x20,0x40,
     0x40,0x40,0x40,0x40,0x40,0xFC,0x00,0x00,0x00,0xE0,0x20,0x20,0x20,0x20,0x20,0x20],#"片"
    0xE69CBA:
    [0x10,0x11,0x11,0x11,0xFD,0x11,0x31,0x39,0x55,0x55,0x91,0x11,0x11,0x12,0x12,0x14,
     0x00,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x12,0x12,0x12,0x0E,0x00],#"机"
    0xE88F9C:
    [0x08,0x08,0xFF,0x08,0x00,0x00,0x3F,0x11,0x08,0x01,0x7F,0x05,0x09,0x31,0xC1,0x01,
     0x20,0x20,0xFE,0x20,0x10,0xF8,0x00,0x10,0x20,0x00,0xFC,0x40,0x20,0x18,0x06,0x00],#"菜"
    0xE9B89F:
    [0x01,0x02,0x1F,0x10,0x12,0x11,0x11,0x10,0x10,0x1F,0x00,0x00,0x7F,0x00,0x00,0x00,
     0x00,0x00,0xF0,0x10,0x10,0x10,0x50,0x20,0x00,0xFC,0x04,0x04,0xE4,0x04,0x28,0x10],#"鸟"
    0xE6B8A9:
    [0x00,0x23,0x12,0x12,0x83,0x42,0x42,0x13,0x10,0x27,0xE4,0x24,0x24,0x24,0x2F,0x00,
     0x00,0xF8,0x08,0x08,0xF8,0x08,0x08,0xF8,0x00,0xFC,0xA4,0xA4,0xA4,0xA4,0xFE,0x00],#"温"
    0xE6B9BF:
    [0x00,0x27,0x14,0x14,0x87,0x44,0x44,0x17,0x11,0x21,0xE9,0x25,0x23,0x21,0x2F,0x00,
     0x00,0xF8,0x08,0x08,0xF8,0x08,0x08,0xF8,0x20,0x20,0x24,0x28,0x30,0x20,0xFE,0x00],#"湿"
    0xE5BAA6:
    [0x01,0x00,0x3F,0x22,0x22,0x3F,0x22,0x22,0x23,0x20,0x2F,0x24,0x42,0x41,0x86,0x38,
     0x00,0x80,0xFE,0x20,0x20,0xFC,0x20,0x20,0xE0,0x00,0xF0,0x10,0x20,0xC0,0x30,0x0E],#"度"
    0xE5B9BF:
    [0x01,0x00,0x00,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x40,0x40,0x80,
     0x00,0x80,0x80,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00],#"广"
    0xE5B79E:
    [0x10,0x10,0x10,0x10,0x10,0x54,0x52,0x52,0x90,0x10,0x10,0x10,0x20,0x20,0x40,0x80,
     0x04,0x84,0x84,0x84,0x84,0xA4,0x94,0x94,0x84,0x84,0x84,0x84,0x84,0x84,0x04,0x04],#"州"


# 创建oled实例
i2c = I2C(sda=Pin(5), scl=Pin(4))   #I2C初始化：sda--> Y8, scl --> Y6
oled = SSD1306_I2C(128, 64, i2c, addr=0x3c) #OLED显示屏初始化：128*64分辨率,OLED的I2C地址是0x3c
# 创建dht实例
sensor = dht.DHT11(Pin(14))
#sensor = dht.DHT11(Pin(14))

print('dht11_ssd1306')

# 全部灭掉
oled.fill(0)
oled.show()

# 不断读取温湿度
while True:
  try:
    # 睡眠10s  
    sleep(10)
    oled.fill(0)
    oled.show()
    # 开始测量
    sensor.measure()
    # 读取温度
    temp = sensor.temperature()
    # 读取湿度
    hum = sensor.humidity()
    temp_f = temp * (9/5) + 32.0
    print('Temperature: %3.1f C' %temp)
    print('Temperature: %3.1f F' %temp_f)
    print('Humidity: %3.1f %%' %hum)
    
    # 中文一个字是 16 X 16 
    chinese('单片机菜鸟',0,0)
    chinese('广州',0,2)
    chinese('温度',0,4)
    oled.text('%d' % (temp),  33, 41, 2)
    chinese('湿度',0,6)
    oled.text('%d' % (hum),  33, 56, 2)
    oled.show()
  except OSError as e:
    print('Failed to read sensor.')

🔎测试结果

>>> %Run -c $EDITOR_CONTENT
Warning: I2C(-1, ...) is deprecated, use SoftI2C(...) instead
dht11_ssd1306
Temperature: 20.0 C
Temperature: 68.0 F
Humidity: 63.0 %
Temperature: 20.0 C
Temperature: 68.0 F
Humidity: 63.0 %
Temperature: 20.0 C
Temperature: 68.0 F
Humidity: 63.0 %