原创Linux基础之iptables

Posted 2021-02-06 Thinking in BigData

iptables 1.4.21 

 

官方：https://www.netfilter.org/projects/iptables/index.html

 

iptables is the userspace command line program used to configure the Linux 2.4.x and later packet filtering ruleset. It is targeted towards system administrators.

iptables是一个命令行工具，与netfilter一起组成linux服务器的防火墙，通过iptables可以设置管理各种ip包过滤规则；

 

查看当前配置，以下为初始配置：

# iptables -nL
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

policy有两种，一种是ACCEPT（默认放开，需要加黑名单，初始配置为全部放开），一种是DROP（默认拒绝，需要加白名单），常用的是后一种

服务器常见的策略是放开内网访问，限制外网访问：

#允许内网和本机访问

iptables -A INPUT -p tcp -s 192.168.0.0/24 -j ACCEPT
iptables -A INPUT -p tcp -s 127.0.0.1 -j ACCEPT

#允许ssh登录

iptables -A INPUT -p tcp --dport 22 -j ACCEPT

#允许访问dns、curl外网等

iptables -A INPUT -p udp --sport 53 -j ACCEPT
iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

#允许访问80端口

iptables -A INPUT -p tcp --dport 80 -j ACCEPT

#允许ping

iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT

#允许keepalived

iptables -I INPUT -d 224.0.0.0/8 -j ACCEPT
iptables -A INPUT -p vrrp -j ACCEPT

iptables -P INPUT DROP

注意在执行最后一句之前，一定要先执行各种ACCEPT，否则执行之后服务器直接远程直接登录不了；

策略生效之后是这样的：

# iptables -nL
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT tcp -- 192.168.0.0/24 0.0.0.0/0
ACCEPT tcp -- 127.0.0.1 0.0.0.0/0
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22

ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

如果想删除某条规则，增加--line-number

# iptables -nL --line-number
Chain INPUT (policy DROP)
num target prot opt source destination
1 ACCEPT tcp -- 192.168.0.0/24 0.0.0.0/0
2 ACCEPT tcp -- 127.0.0.1 0.0.0.0/0
3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22
4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
5 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53
6 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED

Chain FORWARD (policy ACCEPT)
num target prot opt source destination

Chain OUTPUT (policy ACCEPT)
num target prot opt source destination

然后指定行号删除

# iptables -D INPUT $line

保存规则

# sudo systemctl stop firewalld.service

# sudo systemctl disable firewalld.service

 

# yum install iptables-services

# systemctl start iptables

# systemctl enable iptables

# service iptables save

或者修改 /etc/sysconfig/iptables

 

添加端口映射

# iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080

将本机80端口的请求转发到8080端口

查看所有端口映射规则

# iptables -t nat --list