linux-centOs6.5 添加新的硬盘

Posted zhangmin1987

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了linux-centOs6.5 添加新的硬盘相关的知识,希望对你有一定的参考价值。

添加的思路为:

扩展硬盘---添加新的主分区--分区格式为文件--挂载--自动挂载设置

一、扩展硬盘

Vmware增大硬盘空间

技术分享图片

 

二、添加新的主分区

 查看分区 fdisk -l

[[email protected] ~]# fdisk -l

Disk /dev/sda: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00064f31

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          39      307200   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              39        2350    18566144   83  Linux
/dev/sda3            2350        2611     2097152   82  Linux swap / Solaris

创建分区


[[email protected] ~]# fdisk /dev/sda

WARNING: DOS-compatible mode is deprecated. Its strongly recommended to
         switch off the mode (command c) and change display units to
         sectors (command u).

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Selected partition 4
First cylinder (2611-3916, default 2611): 
Using default value 2611
Last cylinder, +cylinders or +size{K,M,G} (2611-3916, default 3916): 
Using default value 3916

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.

再次查看分区
[[email protected] ~]# fdisk -l

Disk /dev/sda: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00064f31

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          39      307200   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              39        2350    18566144   83  Linux
/dev/sda3            2350        2611     2097152   82  Linux swap / Solaris
/dev/sda4            2611        3916    10483750   83  Linux

 


[[email protected] ~]# partx -a /dev/sda4 /dev/sda ###########这个地方如果用partprobe会报错,这个是虚拟机下linux-centOs6.5的BUG


三、 分区格式为文件
[[email protected] ~]# reboot 
##如果不重启。格式化会报错。

[[email protected]
~]# mkfs.ext4 /dev/sda4
mke2fs
1.41.12 (17-May-2010) Filesystem label= OS type:
Linux Block size
=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655360 inodes,
2620937 blocks 131046 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2684354560 80 block groups 32768 blocks per group,
32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables:
done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every
33 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.

 

四、挂载

[[email protected] ~]# mount /dev/sda4 /opt

 

五、开机自动挂载

vi /etc/fstab

###在末尾加上以下内容

dev/sda4 /opt ext4 defaults 1 2

 技术分享图片

六、问题汇总

6.1- partprobe报错

Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy).  As a result, it may not reflect all of your changes until after reboot.
请用这个命令: partx -a /dev/sda4 /dev/sda













以上是关于linux-centOs6.5 添加新的硬盘的主要内容,如果未能解决你的问题,请参考以下文章

linux-centos6.5一键安装 Redmine

linux-centos6.5之ssh配置

Linux-CentOS 6.5 安装 MySQL 8.0

linux-centos6.5一键安装 禅道

Linux-Centos6.5-Oracle数据库安装-DNS安装

RAID磁盘阵列的部署(red hat 6.5)