《蓝桥杯备赛》CT117E嵌入式竞赛板LCD驱动库的使用(带完整源码)

Posted 嵌入式历练者

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了《蓝桥杯备赛》CT117E嵌入式竞赛板LCD驱动库的使用(带完整源码)相关的知识,希望对你有一定的参考价值。

声明:开发板为蓝桥杯CT117E Rev 1.1,资源只用于学习用途

1.蓝桥杯LCD驱动库(官方提供)

lcd.c

/*
  程序说明: CT117E嵌入式竞赛板LCD驱动程序
  软件环境: Keil uVision 4.10 
  硬件环境: CT117E嵌入式竞赛板
  日    期: 2011-8-9
*/
#include "lcd.h"
#include "fonts.h"

static  vu16 TextColor = 0x0000, BackColor = 0xFFFF;
vu16 dummy;

/*******************************************************************************
* Function Name  : Delay_LCD
* Description    : Inserts a delay time.
* Input          : nCount: specifies the delay time length.
* Output         : None
* Return         : None
*******************************************************************************/
void Delay_LCD(u16 n)

	u16 i,j;
	for (i = 0;i<n;++i)
		for(j=0;j<3000;++j);


/*
	uC8230型液晶控制器寄存器配置
*/
void REG_8230_Init(void)

	LCD_WriteReg(0x0000,0x0001);
	Delay_LCD(1000); 
	LCD_WriteReg(0x0001,0x0000);
	LCD_WriteReg(0x0010,0x1790);
	LCD_WriteReg(0x0060,0x2700);
	LCD_WriteReg(0x0061,0x0001);
	LCD_WriteReg(0x0046,0x0002);
	LCD_WriteReg(0x0013,0x8010);
	LCD_WriteReg(0x0012,0x80fe);
	LCD_WriteReg(0x0002,0x0500);
	LCD_WriteReg(0x0003,0x1030);
	
	LCD_WriteReg(0x0030,0x0303);
	LCD_WriteReg(0x0031,0x0303);
	LCD_WriteReg(0x0032,0x0303);
	LCD_WriteReg(0x0033,0x0300);
	LCD_WriteReg(0x0034,0x0003);
	LCD_WriteReg(0x0035,0x0303);
	LCD_WriteReg(0x0036,0x0014);
	LCD_WriteReg(0x0037,0x0303);
	LCD_WriteReg(0x0038,0x0303);
	LCD_WriteReg(0x0039,0x0303);
	LCD_WriteReg(0x003a,0x0300);
	LCD_WriteReg(0x003b,0x0003);
	LCD_WriteReg(0x003c,0x0303);
	LCD_WriteReg(0x003d,0x1400);
	  
	LCD_WriteReg(0x0092,0x0200);
	LCD_WriteReg(0x0093,0x0303);
	LCD_WriteReg(0x0090,0x080d); 
	LCD_WriteReg(0x0003,0x1018); 
	LCD_WriteReg(0x0007,0x0173);


void REG_932X_Init(void)

	LCD_WriteReg(R227, 0x3008);   // Set internal timing
	LCD_WriteReg(R231, 0x0012); // Set internal timing
	LCD_WriteReg(R239, 0x1231);   // Set internal timing
	LCD_WriteReg(R1  , 0x0000); // set SS and SM bit		  //0x0100
	LCD_WriteReg(R2  , 0x0700); // set 1 line inversion
	LCD_WriteReg(R3  , 0x1030);   // set GRAM write direction and BGR=1.
	LCD_WriteReg(R4  , 0x0000);   // Resize register
	LCD_WriteReg(R8  , 0x0207);   // set the back porch and front porch
	LCD_WriteReg(R9  , 0x0000);   // set non-display area refresh cycle ISC[3:0]
	LCD_WriteReg(R10 , 0x0000);   // FMARK function
	LCD_WriteReg(R12 , 0x0000); // RGB interface setting
	LCD_WriteReg(R13 , 0x0000);   // Frame marker Position
	LCD_WriteReg(R15 , 0x0000); // RGB interface polarity
	/**************Power On sequence ****************/
	LCD_WriteReg(R16 , 0x0000);   // SAP, BT[3:0], AP, DSTB, SLP, STB
	LCD_WriteReg(R17 , 0x0007);   // DC1[2:0], DC0[2:0], VC[2:0]
	LCD_WriteReg(R18 , 0x0000); // VREG1OUT voltage
	LCD_WriteReg(R19 , 0x0000);   // VDV[4:0] for VCOM amplitude
	Delay_LCD(1000);                    // Delay 200 MS , Dis-charge capacitor power voltage
	LCD_WriteReg(R16 , 0x1690);   // SAP, BT[3:0], AP, DSTB, SLP, STB
	LCD_WriteReg(R17 , 0x0227); // R11H=0x0221 at VCI=3.3V, DC1[2:0], DC0[2:0], VC[2:0]
	Delay_LCD(50);      // Delay XXms
	LCD_WriteReg(R18 , 0x001D); // External reference voltage= Vci;
	Delay_LCD(50);      // Delay XXms
	LCD_WriteReg(R19 , 0x0800); // R13H=1D00 when R12H=009D;VDV[4:0] for VCOM amplitude
	LCD_WriteReg(R41 , 0x0014); // R29H=0013 when R12H=009D;VCM[5:0] for VCOMH
	LCD_WriteReg(R43 , 0x000B);   // Frame Rate = 96Hz
	Delay_LCD(50);      // Delay XXms
	LCD_WriteReg(R32 , 0x0000); // GRAM horizontal Address
	LCD_WriteReg(R33 , 0x0000); // GRAM Vertical Address
	/* ----------- Adjust the Gamma Curve ---------- */
	LCD_WriteReg(R48 , 0x0007);
	LCD_WriteReg(R49 , 0x0707);
	LCD_WriteReg(R50 , 0x0006);
	LCD_WriteReg(R53 , 0x0704);
	LCD_WriteReg(R54 , 0x1F04);
	LCD_WriteReg(R55 , 0x0004);
	LCD_WriteReg(R56 , 0x0000);
	LCD_WriteReg(R57 , 0x0706);
	LCD_WriteReg(R60 , 0x0701);
	LCD_WriteReg(R61 , 0x000F);
	/* ------------------ Set GRAM area --------------- */
	LCD_WriteReg(R80 , 0x0000);   // Horizontal GRAM Start Address
	LCD_WriteReg(R81 , 0x00EF);   // Horizontal GRAM End Address
	LCD_WriteReg(R82 , 0x0000); // Vertical GRAM Start Address
	LCD_WriteReg(R83 , 0x013F); // Vertical GRAM Start Address
	LCD_WriteReg(R96 , 0x2700); // Gate Scan Line		  0xA700
	LCD_WriteReg(R97 , 0x0001); // NDL,VLE, REV
	LCD_WriteReg(R106, 0x0000); // set scrolling line
	/* -------------- Partial Display Control --------- */
	LCD_WriteReg(R128, 0x0000);   
	LCD_WriteReg(R129, 0x0000);
	LCD_WriteReg(R130, 0x0000);
	LCD_WriteReg(R131, 0x0000);
	LCD_WriteReg(R132, 0x0000);
	LCD_WriteReg(R133, 0x0000);
	/* -------------- Panel Control ------------------- */
	LCD_WriteReg(R144, 0x0010);
	LCD_WriteReg(R146, 0x0000);
	LCD_WriteReg(R147, 0x0003);
	LCD_WriteReg(R149, 0x0110);
	LCD_WriteReg(R151, 0x0000);
	LCD_WriteReg(R152, 0x0000);
	   /* Set GRAM write direction and BGR = 1 */
	   /* I/D=01 (Horizontal : increment, Vertical : decrement) */
	   /* AM=1 (address is updated in vertical writing direction) */
	LCD_WriteReg(R3  , 0x01018);  //0x1018
	
	LCD_WriteReg(R7  , 0x0173); // 262K color and display ON

/*******************************************************************************
* Function Name  : STM3210B_LCD_Init
* Description    : Initializes the LCD.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void STM3210B_LCD_Init(void)
 
	LCD_CtrlLinesConfig();
	dummy = LCD_ReadReg(0);	
	
	if(dummy == 0x8230)
		REG_8230_Init();
	
	else
		REG_932X_Init();	
	
	dummy = LCD_ReadReg(0);	


/*******************************************************************************
* Function Name  : LCD_SetTextColor
* Description    : Sets the Text color.
* Input          : - Color: specifies the Text color code RGB(5-6-5).
* Output         : - TextColor: Text color global variable used by LCD_DrawChar
*                  and LCD_DrawPicture functions.
* Return         : None
*******************************************************************************/
void LCD_SetTextColor(vu16 Color)

	TextColor = Color;

/*******************************************************************************
* Function Name  : LCD_SetBackColor
* Description    : Sets the Background color.
* Input          : - Color: specifies the Background color code RGB(5-6-5).
* Output         : - BackColor: Background color global variable used by 
*                  LCD_DrawChar and LCD_DrawPicture functions.
* Return         : None
*******************************************************************************/
void LCD_SetBackColor(vu16 Color)

	BackColor = Color;

/*******************************************************************************
* Function Name  : LCD_ClearLine
* Description    : Clears the selected line.
* Input          : - Line: the Line to be cleared.
*                    This parameter can be one of the following values:
*                       - Linex: where x can be 0..9
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_ClearLine(u8 Line)

	LCD_DisplayStringLine(Line, "                    ");

/*******************************************************************************
* Function Name  : LCD_Clear
* Description    : Clears the hole LCD.
* Input          : Color: the color of the background.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_Clear(u16 Color)

	u32 index = 0;
	LCD_SetCursor(0x00, 0x0000); 
	LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	for(index = 0; index < 76800; index++)
	
		LCD_WriteRAM(Color);    
	

/*******************************************************************************
* Function Name  : LCD_SetCursor
* Description    : Sets the cursor position.
* Input          : - Xpos: specifies the X position.
*                  - Ypos: specifies the Y position. 
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_SetCursor(u8 Xpos, u16 Ypos)
 
	LCD_WriteReg(R32, Xpos);
	LCD_WriteReg(R33, Ypos);

/*******************************************************************************
* Function Name  : LCD_DrawChar
* Description    : Draws a character on LCD.
* Input          : - Xpos: the Line where to display the character shape.
*                    This parameter can be one of the following values:
*                       - Linex: where x can be 0..9
*                  - Ypos: start column address.
*                  - c: pointer to the character data.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DrawChar(u8 Xpos, u16 Ypos, uc16 *c)

	u32 index = 0, i = 0;
	u8 Xaddress = 0;
   
	Xaddress = Xpos;
	LCD_SetCursor(Xaddress, Ypos);
  
	for(index = 0; index < 24; index++)
	
		LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
		for(i = 0; i < 16; i++)
		
			if((c[index] & (1 << i)) == 0x00)
			
				LCD_WriteRAM(BackColor);
			
			else
			
				LCD_WriteRAM(TextColor);
			
		
		Xaddress++;
		LCD_SetCursor(Xaddress, Ypos);
	

/*******************************************************************************
* Function Name  : LCD_DisplayChar
* Description    : Displays one character (16dots width, 24dots height).
* Input          : - Line: the Line where to display the character shape .
*                    This parameter can be one of the following values:
*                       - Linex: where x can be 0..9
*                  - Column: start column address.
*                  - Ascii: character ascii code, must be between 0x20 and 0x7E.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DisplayChar(u8 Line, u16 Column, u8 Ascii)

	Ascii -= 32;
	LCD_DrawChar(Line, Column, &ASCII_Table[Ascii * 24]);

/*******************************************************************************
* Function Name  : LCD_DisplayStringLine
* Description    : Displays a maximum of 20 char on the LCD.
* Input          : - Line: the Line where to display the character shape .
*                    This parameter can be one of the following values:
*                       - Linex: where x can be 0..9
*                  - *ptr: pointer to string to display on LCD.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DisplayStringLine(u8 Line, u8 *ptr)

	u32 i = 0;
	u16 refcolumn = 319;//319;

	while ((*ptr != 0) && (i < 20))	 //	20
	
		LCD_DisplayChar(Line, refcolumn, *ptr);
		refcolumn -= 16;
		ptr++;
		i++;
	

/*******************************************************************************
* Function Name  : LCD_SetDisplayWindow
* Description    : Sets a display window
* Input          : - Xpos: specifies the X buttom left position.
*                  - Ypos: specifies the Y buttom left position.
*                  - Height: display window height.
*                  - Width: display window width.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_SetDisplayWindow(u8 Xpos, u16 Ypos, u8 Height, u16 Width)

	if(Xpos >= Height)
	
		LCD_WriteReg(R80, (Xpos - Height + 1));
	
	else
	
		LCD_WriteReg(R80, 0);
	
	LCD_WriteReg(R81, Xpos);
	if(Ypos >= Width)
	
		LCD_WriteReg(R82, (Ypos - Width + 1));
	  
	else
	
		LCD_WriteReg(R82, 0);
	
	/* Vertical GRAM End Address */
	LCD_WriteReg(R83, Ypos);
	LCD_SetCursor(Xpos, Ypos);

/*******************************************************************************
* Function Name  : LCD_WindowModeDisable
* Description    : Disables LCD Window mode.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_WindowModeDisable(void)

	LCD_SetDisplayWindow(239, 0x13F, 240, 320);
	LCD_WriteReg(R3, 0x1018);    

/*******************************************************************************
* Function Name  : LCD_DrawLine
* Description    : Displays a line.
* Input          : - Xpos: specifies the X position.
*                  - Ypos: specifies the Y position.
*                  - Length: line length.
*                  - Direction: line direction.
*                    This parameter can be one of the following values: Vertical 
*                    or Horizontal.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DrawLine(u8 Xpos, u16 Ypos, u16 Length, u8 Direction)

	u32 i = 0;
  
	LCD_SetCursor(Xpos, Ypos);
	if(Direction == Horizontal)
	
		LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
		for(i = 0; i < Length; i++)
		
			LCD_WriteRAM(TextColor);
		
	
	else
	
		for(i = 0; i < Length; i++)
		
			LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
			LCD_WriteRAM(TextColor);
			Xpos++;
			LCD_SetCursor(Xpos, Ypos);
		
	

/*******************************************************************************
* Function Name  : LCD_DrawRect
* Description    : Displays a rectangle.
* Input          : - Xpos: specifies the X position.
*                  - Ypos: specifies the Y position.
*                  - Height: display rectangle height.
*                  - Width: display rectangle width.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DrawRect(u8 Xpos, u16 Ypos, u8 Height, u16 Width)

	LCD_DrawLine(Xpos, Ypos, Width, Horizontal);
	LCD_DrawLine((Xpos + Height), Ypos, Width, Horizontal);
  
	LCD_DrawLine(Xpos, Ypos, Height, Vertical);
	LCD_DrawLine(Xpos, (Ypos - Width + 1), Height, Vertical);

/*******************************************************************************
* Function Name  : LCD_DrawCircle
* Description    : Displays a circle.
* Input          : - Xpos: specifies the X position.
*                  - Ypos: specifies the Y position.
*                  - Height: display rectangle height.
*                  - Width: display rectangle width.
* Output         : None
* Return         : None
*******************************************************************************/
void LCD_DrawCircle(u8 Xpos, u16 Ypos, u16 Radius)

	s32  D;
	u32  CurX;
	u32  CurY;
  
  	D = 3 - (Radius << 1);
  	CurX = 0;
  	CurY = Radius;
  
  	while (CurX <= CurY)
  	
	    LCD_SetCursor(Xpos + CurX, Ypos + CurY);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos + CurX, Ypos - CurY);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos - CurX, Ypos + CurY);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos - CurX, Ypos - CurY);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos + CurY, Ypos + CurX);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos + CurY, Ypos - CurX);
	    LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
	    LCD_WriteRAM(TextColor);
	
	    LCD_SetCursor(Xpos - CurY,<

以上是关于《蓝桥杯备赛》CT117E嵌入式竞赛板LCD驱动库的使用(带完整源码)的主要内容,如果未能解决你的问题,请参考以下文章

蓝桥杯备赛刷题

蓝桥杯备赛刷题

蓝桥杯备赛--二分查找

蓝桥杯备赛--二分查找

蓝桥杯备赛--教你用矩阵优化递推

蓝桥杯备赛--教你用矩阵优化递推