bpf — Linux manual page
Posted rtoax
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了bpf — Linux manual page相关的知识，希望对你有一定的参考价值。
https://www.man7.org/linux/man-pages/man2/bpf.2.html
BPF(2) Linux Programmer's Manual BPF(2)
NAME top
bpf - perform a command on an extended BPF map or program
SYNOPSIS top
#include <linux/bpf.h>
int bpf(int cmd, union bpf_attr *attr, unsigned int size);
DESCRIPTION top
The bpf() system call performs a range of operations related to
extended Berkeley Packet Filters. Extended BPF (or eBPF) is
similar to the original ("classic") BPF (cBPF) used to filter
network packets. For both cBPF and eBPF programs, the kernel
statically analyzes the programs before loading them, in order to
ensure that they cannot harm the running system.
eBPF extends cBPF in multiple ways, including the ability to call
a fixed set of in-kernel helper functions (via the BPF_CALL
opcode extension provided by eBPF) and access shared data
structures such as eBPF maps.
Extended BPF Design/Architecture
eBPF maps are a generic data structure for storage of different
data types. Data types are generally treated as binary blobs, so
a user just specifies the size of the key and the size of the
value at map-creation time. In other words, a key/value for a
given map can have an arbitrary structure.
A user process can create multiple maps (with key/value-pairs
being opaque bytes of data) and access them via file descriptors.
Different eBPF programs can access the same maps in parallel.
It's up to the user process and eBPF program to decide what they
store inside maps.
There's one special map type, called a program array. This type
of map stores file descriptors referring to other eBPF programs.
When a lookup in the map is performed, the program flow is
redirected in-place to the beginning of another eBPF program and
does not return back to the calling program. The level of
nesting has a fixed limit of 32, so that infinite loops cannot be
crafted. At run time, the program file descriptors stored in the
map can be modified, so program functionality can be altered
based on specific requirements. All programs referred to in a
program-array map must have been previously loaded into the
kernel via bpf(). If a map lookup fails, the current program
continues its execution. See BPF_MAP_TYPE_PROG_ARRAY below for
further details.
Generally, eBPF programs are loaded by the user process and
automatically unloaded when the process exits. In some cases,
for example, tc-bpf(8), the program will continue to stay alive
inside the kernel even after the process that loaded the program
exits. In that case, the tc subsystem holds a reference to the
eBPF program after the file descriptor has been closed by the
user-space program. Thus, whether a specific program continues
to live inside the kernel depends on how it is further attached
to a given kernel subsystem after it was loaded via bpf().
Each eBPF program is a set of instructions that is safe to run
until its completion. An in-kernel verifier statically
determines that the eBPF program terminates and is safe to
execute. During verification, the kernel increments reference
counts for each of the maps that the eBPF program uses, so that
the attached maps can't be removed until the program is unloaded.
eBPF programs can be attached to different events. These events
can be the arrival of network packets, tracing events,
classification events by network queueing disciplines (for eBPF
programs attached to a tc(8) classifier), and other types that
may be added in the future. A new event triggers execution of
the eBPF program, which may store information about the event in
eBPF maps. Beyond storing data, eBPF programs may call a fixed
set of in-kernel helper functions.
The same eBPF program can be attached to multiple events and
different eBPF programs can access the same map:
tracing tracing tracing packet packet packet
event A event B event C on eth0 on eth1 on eth2
| | | | | ^
| | | | v |
--> tracing <-- tracing socket tc ingress tc egress
prog_1 prog_2 prog_3 classifier action
| | | | prog_4 prog_5
|--- -----| |------| map_3 | |
map_1 map_2 --| map_4 |--
Arguments
The operation to be performed by the bpf() system call is
determined by the cmd argument. Each operation takes an
accompanying argument, provided via attr, which is a pointer to a
union of type bpf_attr (see below). The size argument is the
size of the union pointed to by attr.
The value provided in cmd is one of the following:
BPF_MAP_CREATE
Create a map and return a file descriptor that refers to
the map. The close-on-exec file descriptor flag (see
fcntl(2)) is automatically enabled for the new file
descriptor.
BPF_MAP_LOOKUP_ELEM
Look up an element by key in a specified map and return
its value.
BPF_MAP_UPDATE_ELEM
Create or update an element (key/value pair) in a
specified map.
BPF_MAP_DELETE_ELEM
Look up and delete an element by key in a specified map.
BPF_MAP_GET_NEXT_KEY
Look up an element by key in a specified map and return
the key of the next element.
BPF_PROG_LOAD
Verify and load an eBPF program, returning a new file
descriptor associated with the program. The close-on-exec
file descriptor flag (see fcntl(2)) is automatically
enabled for the new file descriptor.
The bpf_attr union consists of various anonymous
structures that are used by different bpf() commands:
union bpf_attr {
struct { /* Used by BPF_MAP_CREATE */
__u32 map_type;
__u32 key_size; /* size of key in bytes */
__u32 value_size; /* size of value in bytes */
__u32 max_entries; /* maximum number of entries
in a map */
};
struct { /* Used by BPF_MAP_*_ELEM and BPF_MAP_GET_NEXT_KEY
commands */
__u32 map_fd;
__aligned_u64 key;
union {
__aligned_u64 value;
__aligned_u64 next_key;
};
__u64 flags;
};
struct { /* Used by BPF_PROG_LOAD */
__u32 prog_type;
__u32 insn_cnt;
__aligned_u64 insns; /* 'const struct bpf_insn *' */
__aligned_u64 license; /* 'const char *' */
__u32 log_level; /* verbosity level of verifier */
__u32 log_size; /* size of user buffer */
__aligned_u64 log_buf; /* user supplied 'char *'
buffer */
__u32 kern_version;
/* checked when prog_type=kprobe
(since Linux 4.1) */
};
} __attribute__((aligned(8)));
eBPF maps
Maps are a generic data structure for storage of different types
of data. They allow sharing of data between eBPF kernel
programs, and also between kernel and user-space applications.
Each map type has the following attributes:
* type
* maximum number of elements
* key size in bytes
* value size in bytes
The following wrapper functions demonstrate how various bpf()
commands can be used to access the maps. The functions use the
cmd argument to invoke different operations.
BPF_MAP_CREATE
The BPF_MAP_CREATE command creates a new map, returning a
new file descriptor that refers to the map.
int
bpf_create_map(enum bpf_map_type map_type,
unsigned int key_size,
unsigned int value_size,
unsigned int max_entries)
{
union bpf_attr attr = {
.map_type = map_type,
.key_size = key_size,
.value_size = value_size,
.max_entries = max_entries
};
return bpf(BPF_MAP_CREATE, &attr, sizeof(attr));
}
The new map has the type specified by map_type, and
attributes as specified in key_size, value_size, and
max_entries. On success, this operation returns a file
descriptor. On error, -1 is returned and errno is set to
EINVAL, EPERM, or ENOMEM.
The key_size and value_size attributes will be used by the
verifier during program loading to check that the program
is calling bpf_map_*_elem() helper functions with a
correctly initialized key and to check that the program
doesn't access the map element value beyond the specified
value_size. For example, when a map is created with a
key_size of 8 and the eBPF program calls
bpf_map_lookup_elem(map_fd, fp - 4)
the program will be rejected, since the in-kernel helper
function
bpf_map_lookup_elem(map_fd, void *key)
expects to read 8 bytes from the location pointed to by
key, but the fp - 4 (where fp is the top of the stack)
starting address will cause out-of-bounds stack access.
Similarly, when a map is created with a value_size of 1
and the eBPF program contains
value = bpf_map_lookup_elem(...);
*(u32 *) value = 1;
the program will be rejected, since it accesses the value
pointer beyond the specified 1 byte value_size limit.
Currently, the following values are supported for
map_type:
enum bpf_map_type {
BPF_MAP_TYPE_UNSPEC, /* Reserve 0 as invalid map type */
BPF_MAP_TYPE_HASH,
BPF_MAP_TYPE_ARRAY,
BPF_MAP_TYPE_PROG_ARRAY,
BPF_MAP_TYPE_PERF_EVENT_ARRAY,
BPF_MAP_TYPE_PERCPU_HASH,
BPF_MAP_TYPE_PERCPU_ARRAY,
BPF_MAP_TYPE_STACK_TRACE,
BPF_MAP_TYPE_CGROUP_ARRAY,
BPF_MAP_TYPE_LRU_HASH,
BPF_MAP_TYPE_LRU_PERCPU_HASH,
BPF_MAP_TYPE_LPM_TRIE,
BPF_MAP_TYPE_ARRAY_OF_MAPS,
BPF_MAP_TYPE_HASH_OF_MAPS,
BPF_MAP_TYPE_DEVMAP,
BPF_MAP_TYPE_SOCKMAP,
BPF_MAP_TYPE_CPUMAP,
BPF_MAP_TYPE_XSKMAP,
BPF_MAP_TYPE_SOCKHASH,
BPF_MAP_TYPE_CGROUP_STORAGE,
BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
BPF_MAP_TYPE_QUEUE,
BPF_MAP_TYPE_STACK,
/* See /usr/include/linux/bpf.h for the full list. */
};
map_type selects one of the available map implementations
in the kernel. For all map types, eBPF programs access
maps with the same bpf_map_lookup_elem() and
bpf_map_update_elem() helper functions. Further details
of the various map types are given below.
BPF_MAP_LOOKUP_ELEM
The BPF_MAP_LOOKUP_ELEM command looks up an element with a
given key in the map referred to by the file descriptor
fd.
int
bpf_lookup_elem(int fd, const void *key, void *value)
{
union bpf_attr attr = {
.map_fd = fd,
.key = ptr_to_u64(key),
.value = ptr_to_u64(value),
};
return bpf(BPF_MAP_LOOKUP_ELEM, &attr, sizeof(attr));
}
If an element is found, the operation returns zero and
stores the element's value into value, which must point to
a buffer of value_size bytes.
If no element is found, the operation returns -1 and sets
errno to ENOENT.
BPF_MAP_UPDATE_ELEM
The BPF_MAP_UPDATE_ELEM command creates or updates an
element with a given key/value in the map referred to by
the file descriptor fd.
int
bpf_update_elem(int fd, const void *key, const void *value,
uint64_t flags)
{
union bpf_attr attr = {
.map_fd = fd,
.key = ptr_to_u64(key),
.value = ptr_to_u64(value),
.flags = flags,
};
return bpf(BPF_MAP_UPDATE_ELEM, &attr, sizeof(attr));
}
The flags argument should be specified as one of the
following:
BPF_ANY
Create a new element or update an existing element.
BPF_NOEXIST
Create a new element only if it did not exist.
BPF_EXIST
Update an existing element.
On success, the operation returns zero. On error, -1 is
returned and errno is set to EINVAL, EPERM, ENOMEM, or
E2BIG. E2BIG indicates that the number of elements in the
map reached the max_entries limit specified at map
creation time. EEXIST will be returned if flags specifies
BPF_NOEXIST and the element with key already exists in the
map. ENOENT will be returned if flags specifies BPF_EXIST
and the element with key doesn't exist in the map.
BPF_MAP_DELETE_ELEM
The BPF_MAP_DELETE_ELEM command deletes the element whose
key is key from the map referred to by the file descriptor
fd.
int
bpf_delete_elem(int fd, const void *key)
{
union bpf_attr attr = {
.map_fd = fd,
.key = ptr_to_u64(key),
};
return bpf(BPF_MAP_DELETE_ELEM, &attr, sizeof(attr));
}
On success, zero is returned. If the element is not
found, -1 is returned and errno is set to ENOENT.
BPF_MAP_GET_NEXT_KEY
The BPF_MAP_GET_NEXT_KEY command looks up an element by
key in the map referred to by the file descriptor fd and
sets the next_key pointer to the key of the next element.
int
bpf_get_next_key(int fd, const void *key, void *next_key)
{
union bpf_attr attr = {
.map_fd = fd,
.key = ptr_to_u64(key),
.next_key = ptr_to_u64(next_key),
};
return bpf(BPF_MAP_GET_NEXT_KEY, &attr, sizeof(attr));
}
If key is found, the operation returns zero and sets the
next_key pointer to the key of the next element. If key
is not found, the operation returns zero and sets the
next_key pointer to the key of the first element. If key
is the last element, -1 is returned and errno is set to
ENOENT. Other possible errno values are ENOMEM, EFAULT,
EPERM, and EINVAL. This method can be used to iterate
over all elements in the map.
close(map_fd)
Delete the map referred to by the file descriptor map_fd.
When the user-space program that created a map exits, all
maps will be deleted automatically (but see NOTES).
eBPF map types
The following map types are supported:
BPF_MAP_TYPE_HASH
Hash-table maps have the following characteristics:
* Maps are created and destroyed by user-space programs.
Both user-space and eBPF programs can perform lookup,
update, and delete operations.
* The kernel takes care of allocating and freeing
key/value pairs.
* The map_update_elem() helper will fail to insert new
element when the max_entries limit is reached. (This
ensures that eBPF programs cannot exhaust memory.)
* map_update_elem() replaces existing elements
atomically.
Hash-table maps are optimized for speed of lookup.
BPF_MAP_TYPE_ARRAY
Array maps have the following characteristics:
* Optimized for fastest possible lookup. In the future
the verifier/JIT compiler may recognize lookup()
operations that employ a constant key and optimize it
into constant pointer. It is possible to optimize a
non-constant key into direct pointer arithmetic as
well, since pointers and value_size are constant for
the life of the eBPF program. In other words,
array_map_lookup_elem() may be 'inlined' by the
verifier/JIT compiler while preserving concurrent
access to this map from user space.
* All array elements pre-allocated and zero initialized
at init time
* The key is an array index, and must be exactly four
bytes.
* map_delete_elem() fails with the error EINVAL, since
elements cannot be deleted.
* map_update_elem() replaces elements in a nonatomic
fashion; for atomic updates, a hash-table map should be
used instead. There is however one special case that
can also be used with arrays: the atomic built-in
__sync_fetch_and_add() can be used on 32 and 64 bit
atomic counters. For example, it can be applied on the
whole value itself if it represents a single counter,
or in case of a structure containing multiple counters,
it could be used on individual counters. This is quite
often useful for aggregation and accounting of events.
Among the uses for array maps are the following:
* As "global" eBPF variables: an array of 1 element whose
key is (index) 0 and where the value is a collection of
'global' variables which eBPF programs can use to keep
state between events.
* Aggregation of tracing events into a fixed set of
buckets.
* Accounting of networking events, for example, number of
packets and packet sizes.
BPF_MAP_TYPE_PROG_ARRAY (since Linux 4.2)
A program array map is a special kind of array map whose
map values contain only file descriptors referring to
other eBPF programs. Thus, both the key_size and
value_size must be exactly four bytes. This map is used
in conjunction with the bpf_tail_call() helper.
This means that an eBPF program with a program array map
attached to it can call from kernel side into
void bpf_tail_call(void *context, void *prog_map,
unsigned int index);
and therefore replace its own program flow with the one
from the program at the given program array slot, if
present. This can be regarded as kind of a jump table to
a different eBPF program. The invoked program will then
reuse the same stack. When a jump into the new program
has been performed, it won't return to the old program
anymore.
If no eBPF program is found at the given index of the
program array (because the map slot doesn't contain a
valid program file descriptor, the specified lookup
index/key is out of bounds, or the limit of 32 nested
calls has been exceed), execution continues with the
current eBPF program. This can be used as a fall-through
for default cases.
A program array map is useful, for example, in tracing or
networking, to handle individual system calls or protocols
in their own subprograms and use their identifiers as an
individual map index. This approach may result in
performance benefits, and also makes it possible to
overcome the maximum instruction limit of a single eBPF
program. In dynamic environments, a user-space daemon
might atomically replace individual subprograms at run-
time with newer versions to alter overall program
behavior, for instance, if global policies change.
eBPF programs
The BPF_PROG_LOAD command is used to load an eBPF program into
the kernel. The return value for this command is a new file
descriptor associated with this eBPF program.
char bpf_log_buf[LOG_BUF_SIZE];
int
bpf_prog_load(enum bpf_prog_type type,
const struct bpf_insn *insns, int insn_cnt,
const char *license)
{
union bpf_attr attr = {
.prog_type = type,
.insns = ptr_to_u64(insns),
.insn_cnt = insn_cnt,
.license = ptr_to_u64(license),
.log_buf = ptr_to_u64(bpf_log_buf),
.log_size = LOG_BUF_SIZE,
.log_level = 1,
};
return bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
}
prog_type is one of the available program types:
enum bpf_prog_type {
BPF_PROG_TYPE_UNSPEC, /* Reserve 0 as invalid
program type */
BPF_PROG_TYPE_SOCKET_FILTER,
BPF_PROG_TYPE_KPROBE,
BPF_PROG_TYPE_SCHED_CLS,
BPF_PROG_TYPE_SCHED_ACT,
BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_XDP,
BPF_PROG_TYPE_PERF_EVENT,
BPF_PROG_TYPE_CGROUP_SKB,
BPF_PROG_TYPE_CGROUP_SOCK,
BPF_PROG_TYPE_LWT_IN,
BPF_PROG_TYPE_LWT_OUT,
BPF_PROG_TYPE_LWT_XMIT,
BPF_PROG_TYPE_SOCK_OPS,
BPF_PROG_TYPE_SK_SKB,
BPF_PROG_TYPE_CGROUP_DEVICE,
BPF_PROG_TYPE_SK_MSG,
BPF_PROG_TYPE_RAW_TRACEPOINT,
BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
BPF_PROG_TYPE_LWT_SEG6LOCAL,
BPF_PROG_TYPE_LIRC_MODE2,
BPF_PROG_TYPE_SK_REUSEPORT,
BPF_PROG_TYPE_FLOW_DISSECTOR,
/* See /usr/include/linux/bpf.h for the full list. */
};
For further details of eBPF program types, see below.
The remaining fields of bpf_attr are set as follows:
* insns is an array of struct bpf_insn instructions.
* insn_cnt is the number of instructions in the program referred
to by insns.
* license is a license string, which must be GPL compatible to
call helper functions marked gpl_only. (The licensing rules
are the same as for kernel modules, so that also dual
licenses, such as "Dual BSD/GPL", may be used.)
* log_buf is a pointer to a caller-allocated buffer in which the
in-kernel verifier can store the verification log. This log
is a multi-line string that can be checked by the program
author in order to understand how the verifier came to the
conclusion that the eBPF program is unsafe. The format of the
output can change at any time as the verifier evolves.
* log_size size of the buffer pointed to by log_buf. If the
size of the buffer is not large enough to store all verifier
messages, -1 is returned and errno is set to ENOSPC.
* log_level verbosity level of the verifier. A value of zero
means that the verifier will not provide a log; in this case,
log_buf must be a NULL pointer, and log_size must be zero.
Applying close(2) to the file descriptor returned by
BPF_PROG_LOAD will unload the eBPF program (but see NOTES).
Maps are accessible from eBPF programs and are used to exchange
data between eBPF programs and between eBPF programs and user-
space programs. For example, eBPF programs can process various
events (like kprobe, packets) and store their data into a map,
and user-space programs can then fetch data from the map.
Conversely, user-space programs can use a map as a configuration
mechanism, populating the map with values checked by the eBPF
program, which then modifies its behavior on the fly according to
those values.
eBPF program types
The eBPF program type (prog_type) determines the subset of kernel
helper functions that the program may call. The program type
also determines the program input (context)—the format of struct
bpf_context (which is the data blob passed into the eBPF program
as the first argument).
For example, a tracing program does not have the exact same
subset of helper functions as a socket filter program (though
they may have some helpers in common). Similarly, the input
(context) for a tracing program is a set of register values,
while for a socket filter it is a network packet.
The set of functions available to eBPF programs of a given type
may increase in the future.
The following program types are supported:
BPF_PROG_TYPE_SOCKET_FILTER (since Linux 3.19)
Currently, the set of functions for
BPF_PROG_TYPE_SOCKET_FILTER is:
bpf_map_lookup_elem(map_fd, void *key)
/* look up key in a map_fd */
bpf_map_update_elem(map_fd, void *key, void *value)
/* update key/value */
bpf_map_delete_elem(map_fd, void *key)
/* delete key in a map_fd */
The bpf_context argument is a pointer to a struct
__sk_buff.
BPF_PROG_TYPE_KPROBE (since Linux 4.1)
[To be documented]
BPF_PROG_TYPE_SCHED_CLS (since Linux 4.1)
[To be documented]
BPF_PROG_TYPE_SCHED_ACT (since Linux 4.1)
[To be documented]
Events
Once a program is loaded, it can be attached to an event.
Various kernel subsystems have different ways to do so.
Since Linux 3.19, the following call will attach the program
prog_fd to the socket sockfd, which was created by an earlier
call to socket(2):
setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_BPF,
&prog_fd, sizeof(prog_fd));
Since Linux 4.1, the following call may be used to attach the
eBPF program referred to by the file descriptor prog_fd to a perf
event file descriptor, event_fd, that was created by a previous
call to perf_event_open(2):
ioctl(event_fd, PERF_EVENT_IOC_SET_BPF, prog_fd);
RETURN VALUE top
For a successful call, the return value depends on the operation:
BPF_MAP_CREATE
The new file descriptor associated with the eBPF map.
BPF_PROG_LOAD
The new file descriptor associated with the eBPF program.
All other commands
Zero.
On error, -1 is returned, and errno is set to indicate the error.
ERRORS top
E2BIG The eBPF program is too large or a map reached the
max_entries limit (maximum number of elements).
EACCES For BPF_PROG_LOAD, even though all program instructions
are valid, the program has been rejected because it was
deemed unsafe. This may be because it may have accessed a
disallowed memory region or an uninitialized
stack/register or because the function constraints don't
match the actual types or because there was a misaligned
memory access. In this case, it is recommended to call
bpf() again with log_level = 1 and examine log_buf for the
specific reason provided by the verifier.
EBADF fd is not an open file descriptor.
EFAULT One of the pointers (key or value or log_buf or insns) is
outside the accessible address space.
EINVAL The value specified in cmd is not recognized by this
kernel.
EINVAL For BPF_MAP_CREATE, either map_type or attributes are
invalid.
EINVAL For BPF_MAP_*_ELEM commands, some of the fields of union
bpf_attr that are not used by this command are not set to
zero.
EINVAL For BPF_PROG_LOAD, indicates an attempt to load an invalid
program. eBPF programs can be deemed invalid due to
unrecognized instructions, the use of reserved fields,
jumps out of range, infinite loops or calls of unknown
functions.
ENOENT For BPF_MAP_LOOKUP_ELEM or BPF_MAP_DELETE_ELEM, indicates
that the element with the given key was not found.
ENOMEM Cannot allocate sufficient memory.
EPERM The call was made without sufficient privilege (without
the CAP_SYS_ADMIN capability).
VERSIONS top
The bpf() system call first appeared in Linux 3.18.
CONFORMING TO top
The bpf() system call is Linux-specific.
NOTES top
Prior to Linux 4.4, all bpf() commands require the caller to have
the CAP_SYS_ADMIN capability. From Linux 4.4 onwards, an
unprivileged user may create limited programs of type
BPF_PROG_TYPE_SOCKET_FILTER and associated maps. However they
may not store kernel pointers within the maps and are presently
limited to the following helper functions:
* get_random
* get_smp_processor_id
* tail_call
* ktime_get_ns
Unprivileged access may be blocked by writing the value 1 to the
file /proc/sys/kernel/unprivileged_bpf_disabled.
eBPF objects (maps and programs) can be shared between processes.
For example, after fork(2), the child inherits file descriptors
referring to the same eBPF objects. In addition, file
descriptors referring to eBPF objects can be transferred over
UNIX domain sockets. File descriptors referring to eBPF objects
can be duplicated in the usual way, using dup(2) and similar
calls. An eBPF object is deallocated only after all file
descriptors referring to the object have been closed.
eBPF programs can be written in a restricted C that is compiled
(using the clang compiler) into eBPF bytecode. Various features
are omitted from this restricted C, such as loops, global
variables, variadic functions, floating-point numbers, and
passing structures as function arguments. Some examples can be
found in the samples/bpf/*_kern.c files in the kernel source
tree.
The kernel contains a just-in-time (JIT) compiler that translates
eBPF bytecode into native machine code for better performance.
In kernels before Linux 4.15, the JIT compiler is disabled by
default, but its operation can be controlled by writing one of
the following integer strings to the file
/proc/sys/net/core/bpf_jit_enable:
0 Disable JIT compilation (default).
1 Normal compilation.
2 Debugging mode. The generated opcodes are dumped in
hexadecimal into the kernel log. These opcodes can then be
disassembled using the program tools/net/bpf_jit_disasm.c
provided in the kernel source tree.
Since Linux 4.15, the kernel may configured with the
CONFIG_BPF_JIT_ALWAYS_ON option. In this case, the JIT compiler
is always enabled, and the bpf_jit_enable is initialized to 1 and
is immutable. (This kernel configuration option was provided as
a mitigation for one of the Spectre attacks against the BPF
interpreter.)
The JIT compiler for eBPF is currently available for the
following architectures:
* x86-64 (since Linux 3.18; cBPF since Linux 3.0);
* ARM32 (since Linux 3.18; cBPF since Linux 3.4);
* SPARC 32 (since Linux 3.18; cBPF since Linux 3.5);
* ARM-64 (since Linux 3.18);
* s390 (since Linux 4.1; cBPF since Linux 3.7);
* PowerPC 64 (since Linux 4.8; cBPF since Linux 3.1);
* SPARC 64 (since Linux 4.12);
* x86-32 (since Linux 4.18);
* MIPS 64 (since Linux 4.18; cBPF since Linux 3.16);
* riscv (since Linux 5.1).
EXAMPLES top
/* bpf+sockets example:
* 1. create array map of 256 elements
* 2. load program that counts number of packets received
* r0 = skb->data[ETH_HLEN + offsetof(struct iphdr, protocol)]
* map[r0]++
* 3. attach prog_fd to raw socket via setsockopt()
* 4. print number of received TCP/UDP packets every second
*/
int
main(int argc, char *argv[])
{
int sock, map_fd, prog_fd, key;
long long value = 0, tcp_cnt, udp_cnt;
map_fd = bpf_create_map(BPF_MAP_TYPE_ARRAY, sizeof(key),
sizeof(value), 256);
if (map_fd < 0) {
printf("failed to create map '%s'\\n", strerror(errno));
/* likely not run as root */
return 1;
}
struct bpf_insn prog[] = {
BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), /* r6 = r1 */
BPF_LD_ABS(BPF_B, ETH_HLEN + offsetof(struct iphdr, protocol)),
/* r0 = ip->proto */
BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -4),
/* *(u32 *)(fp - 4) = r0 */
BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), /* r2 = fp */
BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), /* r2 = r2 - 4 */
BPF_LD_MAP_FD(BPF_REG_1, map_fd), /* r1 = map_fd */
BPF_CALL_FUNC(BPF_FUNC_map_lookup_elem),
/* r0 = map_lookup(r1, r2) */
BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
/* if (r0 == 0) goto pc+2 */
BPF_MOV64_IMM(BPF_REG_1, 1), /* r1 = 1 */
BPF_XADD(BPF_DW, BPF_REG_0, BPF_REG_1, 0, 0),
/* lock *(u64 *) r0 += r1 */
BPF_MOV64_IMM(BPF_REG_0, 0), /* r0 = 0 */
BPF_EXIT_INSN(), /* return r0 */
};
prog_fd = bpf_prog_load(BPF_PROG_TYPE_SOCKET_FILTER, prog,
sizeof(prog) / sizeof(prog[0]), "GPL");
sock = open_raw_sock("lo");
assert(setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd,
sizeof(prog_fd)) == 0);
for (;;) {
key = IPPROTO_TCP;
assert(bpf_lookup_elem(map_fd, &key, &tcp_cnt) == 0);
key = IPPROTO_UDP;
assert(bpf_lookup_elem(map_fd, &key, &udp_cnt) == 0);
printf("TCP %lld UDP %lld packets\\n", tcp_cnt, udp_cnt);
sleep(1);
}
return 0;
}
Some complete working code can be found in the samples/bpf
directory in the kernel source tree.
SEE ALSO top
seccomp(2), bpf-helpers(7), socket(7), tc(8), tc-bpf(8) Both classic and extended BPF are explained in the kernel source file Documentation/networking/filter.txt.
COLOPHON top
This page is part of release 5.13 of the Linux man-pages project.
A description of the project, information about reporting bugs,
and the latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2021-08-27 BPF(2)
Pages that refer to this page: perf_event_open(2), seccomp(2), syscalls(2), lirc(4), proc(5), bpf-helpers(7), capabilities(7), socket(7), tc-bpf(8)
以上是关于bpf — Linux manual page的主要内容，如果未能解决你的问题，请参考以下文章
migrate_pages — Linux manual page
move_pages — Linux manual page
userfaultfd — Linux manual page