ESP8266 or ESP32开启WebServe服务实现文件上传和下载功能
Posted perseverance52
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了ESP8266 or ESP32开启WebServe服务实现文件上传和下载功能相关的知识，希望对你有一定的参考价值。
ESP8266 or ESP32开启WebServe服务实现文件上传和下载功能测试实例代码
- 本实例需要外接TF卡模块
Micro SD卡和MIni SD卡版本参数
- 需要的库
#ifdef ESP8266
#include <ESP8266WiFi.h> // Built-in
#include <ESP8266WiFiMulti.h> // Built-in
#include <ESP8266WebServer.h> // Built-in
#include <ESP8266mDNS.h>
#else
#include <WiFi.h> // Built-in
#include <WiFiMulti.h> // Built-in
#include <ESP32WebServer.h> // https://github.com/Pedroalbuquerque/ESP32WebServer download and place in your Libraries folder
#include <ESPmDNS.h>
#include "FS.h"
#endif
- 实例代码
/*
*
* ESP32/ESP8266 example of downloading and uploading a file from or to the ESP device's Filing System
* WiFi信息和静态IP地址信息放在Network.h中
*/
#ifdef ESP8266
#include <ESP8266WiFi.h> // Built-in
#include <ESP8266WiFiMulti.h> // Built-in
#include <ESP8266WebServer.h> // Built-in
#include <ESP8266mDNS.h>
#else
#include <WiFi.h> // Built-in
#include <WiFiMulti.h> // Built-in
#include <ESP32WebServer.h> // https://github.com/Pedroalbuquerque/ESP32WebServer download and place in your Libraries folder
#include <ESPmDNS.h>
#include "FS.h"
#endif
#include "Network.h"
#include "Sys_Variables.h"
#include "CSS.h"
#include <SD.h>
#include <SPI.h>
#ifdef ESP8266
ESP8266WiFiMulti wifiMulti;
ESP8266WebServer server(80);
#else
WiFiMulti wifiMulti;
ESP32WebServer server(80);
#endif
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void setup(void){
Serial.begin(115200);
if (!WiFi.config(local_IP, gateway, subnet, dns)) { //WiFi.config(ip, gateway, subnet, dns1, dns2);
Serial.println("WiFi STATION Failed to configure Correctly");
}
wifiMulti.addAP(ssid_1, password_1); // 将需要连接的一系列WiFi ID和密码Network.h中
wifiMulti.addAP(ssid_2,password_2); // ESP8266-NodeMCU再启动后会扫描当前网络
wifiMulti.addAP(ssid_3, password_3); // 环境查找是否有这里列出的WiFi ID。如果有
//wifiMulti.addAP(ssid_4, password_4); //
Serial.println("Connecting ...");
while (wifiMulti.run() != WL_CONNECTED) { // Wait for the Wi-Fi to connect: scan for Wi-Fi networks, and connect to the strongest of the networks above
delay(250); Serial.print('.');
}
Serial.println("\\nConnected to "+WiFi.SSID()+" Use IP address: "+WiFi.localIP().toString()); // Report which SSID and IP is in use
// The logical name http://fileserver.local will also access the device if you have 'Bonjour' running or your system supports multicast dns
if (!MDNS.begin(servername)) { // Set your preferred server name, if you use "myserver" the address would be http://myserver.local/
Serial.println(F("Error setting up MDNS responder!"));
ESP.restart();
}
#ifdef ESP32
// Note: SD_Card readers on the ESP32 will NOT work unless there is a pull-up on MISO, either do this or wire one on (1K to 4K7)
Serial.println(MISO);
pinMode(2,INPUT_PULLUP);
#endif
Serial.print(F("Initializing SD card..."));
if (!SD.begin(SD_CS_pin)) { // see if the card is present and can be initialised. Wemos SD-Card CS uses D8
Serial.println(F("Card failed or not present, no SD Card data logging possible..."));
SD_present = false;
}
else
{
Serial.println(F("Card initialised... file access enabled..."));
SD_present = true;
}
// Note: Using the ESP32 and SD_Card readers requires a 1K to 4K7 pull-up to 3v3 on the MISO line, otherwise they do-not function.
//----------------------------------------------------------------------
/ Server Commands
server.on("/", HomePage);
server.on("/download", File_Download);
server.on("/upload", File_Upload);
server.on("/fupload", HTTP_POST,[](){ server.send(200);}, handleFileUpload);
/ End of Request commands
server.begin();
Serial.println("HTTP server started");
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void loop(void){
server.handleClient(); // Listen for client connections
}
// All supporting functions from here...
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void HomePage(){
Sendhtml_Header();
webpage += F("<a href='/download'><button>Download</button></a>");
webpage += F("<a href='/upload'><button>Upload</button></a>");
append_page_footer();
SendHTML_Content();
SendHTML_Stop(); // Stop is needed because no content length was sent
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void File_Download(){ // This gets called twice, the first pass selects the input, the second pass then processes the command line arguments
if (server.args() > 0 ) { // Arguments were received
if (server.hasArg("download")) SD_file_download(server.arg(0));
}
else SelectInput("Enter filename to download","download","download");
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void SD_file_download(String filename){
if (SD_present) {
File download = SD.open("/"+filename);
if (download) {
server.sendHeader("Content-Type", "text/text");
server.sendHeader("Content-Disposition", "attachment; filename="+filename);
server.sendHeader("Connection", "close");
server.streamFile(download, "application/octet-stream");
download.close();
} else ReportFileNotPresent("download");
} else ReportSDNotPresent();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void File_Upload(){
append_page_header();
webpage += F("<h3>Select File to Upload</h3>");
webpage += F("<FORM action='/fupload' method='post' enctype='multipart/form-data'>");
webpage += F("<input class='buttons' style='width:40%' type='file' name='fupload' id = 'fupload' value=''><br>");
webpage += F("<br><button class='buttons' style='width:10%' type='submit'>Upload File</button><br>");
webpage += F("<a href='/'>[Back]</a><br><br>");
append_page_footer();
server.send(200, "text/html",webpage);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
File UploadFile;
void handleFileUpload(){ // upload a new file to the Filing system
HTTPUpload& uploadfile = server.upload(); // See https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266WebServer/srcv
// For further information on 'status' structure, there are other reasons such as a failed transfer that could be used
if(uploadfile.status == UPLOAD_FILE_START)
{
String filename = uploadfile.filename;
if(!filename.startsWith("/")) filename = "/"+filename;
Serial.print("Upload File Name: "); Serial.println(filename);
SD.remove(filename); // Remove a previous version, otherwise data is appended the file again
UploadFile = SD.open(filename, FILE_WRITE); // Open the file for writing in SPIFFS (create it, if doesn't exist)
filename = String();
}
else if (uploadfile.status == UPLOAD_FILE_WRITE)
{
if(UploadFile) UploadFile.write(uploadfile.buf, uploadfile.currentSize); // Write the received bytes to the file
}
else if (uploadfile.status == UPLOAD_FILE_END)
{
if(UploadFile) // If the file was successfully created
{
UploadFile.close(); // Close the file again
Serial.print("Upload Size: "); Serial.println(uploadfile.totalSize);
webpage = "";
append_page_header();
webpage += F("<h3>File was successfully uploaded</h3>");
webpage += F("<h2>Uploaded File Name: "); webpage += uploadfile.filename+"</h2>";
webpage += F("<h2>File Size: "); webpage += file_size(uploadfile.totalSize) + "</h2><br>";
append_page_footer();
server.send(200,"text/html",webpage);
}
else
{
ReportCouldNotCreateFile("upload");
}
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void SendHTML_Header(){
server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
server.sendHeader("Pragma", "no-cache");
server.sendHeader("Expires", "-1");
server.setContentLength(CONTENT_LENGTH_UNKNOWN);
server.send(200, "text/html", ""); // Empty content inhibits Content-length header so we have to close the socket ourselves.
append_page_header();
server.sendContent(webpage);
webpage = "";
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void SendHTML_Content(){
server.sendContent(webpage);
webpage = "";
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void SendHTML_Stop(){
server.sendContent("");
server.client().stop(); // Stop is needed because no content length was sent
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void SelectInput(String heading1, String command, String arg_calling_name){
SendHTML_Header();
webpage += F("<h3>"); webpage += heading1 + "</h3>";
webpage += F("<FORM action='/"); webpage += command + "' method='post'>"; // Must match the calling argument e.g. '/chart' calls '/chart' after selection but with arguments!
webpage += F("<input type='text' name='"); webpage += arg_calling_name; webpage += F("' value=''><br>");
webpage += F("<type='submit' name='"); webpage += arg_calling_name; webpage += F("' value=''><br>");
webpage += F("<a href='/'>[Back]</a>");
append_page_footer();
SendHTML_Content();
SendHTML_Stop();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void ReportSDNotPresent(){
SendHTML_Header();
webpage += F("<h3>No SD Card present</h3>");
webpage += F("<a href='/'>[Back]</a><br><br>");
append_page_footer();
SendHTML_Content();
SendHTML_Stop();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void ReportFileNotPresent(String target){
SendHTML_Header();
webpage += F("<h3>File does not exist</h3>");
webpage += F("<a href='/"); webpage += target + "'>[Back]</a><br><br>";
append_page_footer();
SendHTML_Content();
SendHTML_Stop();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void ReportCouldNotCreateFile(String target){
SendHTML_Header();
webpage += F("<h3>Could Not Create Uploaded File (write-protected?)</h3>");
webpage += F("<a href='/"); webpage += target + "'>[Back]</a><br><br>";
append_page_footer();
SendHTML_Content();
SendHTML_Stop();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
String file_size(int bytes){
String fsize = "";
if (bytes < 1024) fsize = String(bytes)+" B";
else if(bytes < (1024*1024)) fsize = String(bytes/1024.0,3)+" KB";
else if(bytes < (1024*1024*1024)) fsize = String(bytes/1024.0/1024.0,3)+" MB";
else fsize = String(bytes/1024.0/1024.0/1024.0,3)+" GB";
return fsize;
}
- CSS.h文件代码
void append_page_header() {
webpage = F("<!DOCTYPE html><html>");
webpage += F("<head>");
webpage += F("<title>File Server</title>"); // NOTE: 1em = 16px
webpage += F("<meta name='viewport' content='user-scalable=yes,initial-scale=1.0,width=device-width'>");
webpage += F("<style>");
webpage += F("body{max-width:65%;margin:0 auto;font-family:arial;font-size:105%;text-align:center;color:blue;background-color:#F7F2Fd;}");
webpage += F("ul{list-style-type:none;margin:0.1em;padding:0;border-radius:0.375em;overflow:hidden;background-color:#dcade6;font-size:1em;}");
webpage += F("li{float:left;border-radius:0.375em;border-right:0.06em solid #bbb;}last-child {border-right:none;font-size:85%}");
webpage += F("li a{display: block;border-radius:0.375em;padding:0.44em 0.44em;text-decoration:none;font-size:85%}");
webpage += F("li a:hover{background-color:#EAE3EA;border-radius:0.375em;font-size:85%}");
webpage += F("section {font-size:0.88em;}");
webpage += F("h1{color:white;border-radius:0.5em;font-size:1em;padding:0.2em 0.2em;background:#558ED5;}");
webpage += F("h2{color:orange;font-size:1.0em;}");
webpage += F("h3{font-size:0.8em;}");
webpage += F("table{font-family:arial,sans-serif;font-size:0.9em;border-collapse:collapse;width:85%;}");
webpage += F("th,td {border:0.06em solid #dddddd;text-align:left;padding:0.3em;border-bottom:0.06em solid #dddddd;}");
webpage += F("tr:nth-child(odd) {background-color:#eeeeee;}");
webpage += F(".rcorners_n {border-radius:0.5em;background:#558ED5;padding:0.3em 0.3em;width:20%;color:white;font-size:75%;}");
webpage += F(".rcorners_m {border-radius:0.5em;background:#558ED5;padding:0.3em 0.3em;width:50%;color:white;font-size:75%;}");
webpage += 以上是关于ESP8266 or ESP32开启WebServe服务实现文件上传和下载功能的主要内容，如果未能解决你的问题，请参考以下文章
ESP8266/ESP32 +1.3“ or 0.96“ IIC OLED指针时钟+数字时钟显示
STM32+ESP8266连接腾讯云物联网开发平台 3STM32+ESP8266-01S在腾讯云上动态注册设备(AT指令方式)
ESP32/ESP8266自动下载电路波形，ESP32/ESP8266不能UART流控自动下载的解决方法
ESP32/ESP8266自动下载电路波形，ESP32/ESP8266不能UART流控自动下载的解决方法