部署ELK+Kafka+Filebeat日志收集分析系统

Posted Jiangxl~

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了部署ELK+Kafka+Filebeat日志收集分析系统相关的知识，希望对你有一定的参考价值。

ELK+Kafka+Filebeat日志系统

文章目录

1.环境规划

IP地址部署的服务主机名
192.168.81.210es+kafka+zookeeper+kibana+logstashelk-1
192.168.81.220es+kafka+zookeeperelk-2
192.168.81.230es+kafka+zookeeper+nginx+filebeatelk-3

日志系统架构图

nginx—>filebeat—>kafka—>logstash—>elasticsearch—>kibana

2.部署elasticsearch集群

2.1.配置es-1节点

1.下载elasticsearch7.6
[root@elk-1 ~]# wget https://mirrors.huaweicloud.com/elasticsearch/7.6.0/elasticsearch-7.6.0-x86_64.rpm
[root@elk-1 ~/soft]# rpm -ivh elasticsearch-7.6.0-x86_64.rpm 

2.编辑配置文件，配置集群模式
[root@elk-1 ~]#  vim /etc/elasticsearch/elasticsearch.yml
cluster.name: elk-application
node.name: elk-1
path.data: /data/elasticsearch
path.logs: /var/log/elasticsearch
bootstrap.memory_lock: true
network.host: 192.168.81.210,127.0.0.1
http.port: 9200
cluster.initial_master_nodes: ["elk-1"]
discovery.zen.ping.unicast.hosts: ["192.168.81.210","192.168.81.220","192.168.81.230"]
discovery.zen.fd.ping_timeout: 120s
discovery.zen.fd.ping_retries: 6
discovery.zen.fd.ping_interval: 30s
http.cors.enabled: true
http.cors.allow-origin: "*"

3.创建数据目录
[root@elk-1 ~]# mkdir /data/elasticsearch/ -p
[root@elk-1 ~]# chown -R elasticsearch.elasticsearch /data/elasticsearch/

4.配置内存锁定
[root@elk-1 ~]# mkdir /etc/systemd/system/elasticsearch.service.d/
[root@elk-1 ~]# vim /etc/systemd/system/elasticsearch.service.d/override.conf
[Service]
LimitMEMLOCK=infinity

5.启动elasticsearch
[root@elk-1 ~]# systemctl daemon-reload 
[root@elk-1 ~]# systemctl start elasticsearch
[root@elk-1 ~]# systemctl enable elasticsearch

2.2.配置es-2节点

只是配置文件中node.name和network.host不同，其他操作方式一致

[root@elk-2 ~]#  vim /etc/elasticsearch/elasticsearch.yml
cluster.name: elk-application
node.name: elk-2
path.data: /data/elasticsearch
path.logs: /var/log/elasticsearch
bootstrap.memory_lock: true
network.host: 192.168.81.220,127.0.0.1
http.port: 9200
cluster.initial_master_nodes: ["elk-1"]
discovery.zen.ping.unicast.hosts: ["192.168.81.210","192.168.81.220","192.168.81.230"]
discovery.zen.fd.ping_timeout: 120s
discovery.zen.fd.ping_retries: 6
discovery.zen.fd.ping_interval: 30s
http.cors.enabled: true
http.cors.allow-origin: "*"

2.3.配置es-3节点

只是配置文件中node.name和network.host不同，其他操作方式一致

[root@elk-2 ~]#  vim /etc/elasticsearch/elasticsearch.yml
cluster.name: elk-application
node.name: elk-3
path.data: /data/elasticsearch
path.logs: /var/log/elasticsearch
bootstrap.memory_lock: true
network.host: 192.168.81.230,127.0.0.1
http.port: 9200
cluster.initial_master_nodes: ["elk-1"]
discovery.zen.ping.unicast.hosts: ["192.168.81.210","192.168.81.220","192.168.81.230"]
discovery.zen.fd.ping_timeout: 120s
discovery.zen.fd.ping_retries: 6
discovery.zen.fd.ping_interval: 30s
http.cors.enabled: true
http.cors.allow-origin: "*"

2.4.使用es-head插件查看集群状态

3.部署kibana

1.下载kibana rpm包
[root@elk-1 ~]# r[root@elk-1 ~/soft]# rpm -ivh kibana-7.6.0-x86_64.rpm 
pm -ivh kibana-7.6.0-x86_64.rpm 

2.配置kibana
[root@elk-1 ~]# vim /etc/kibana/kibana.yml
server.port: 5601									
server.host: "192.168.81.210"								
server.name: "elk-application"												
elasticsearch.hosts: ["http://192.168.81.210:9200"]				
i18n.locale: "zh-CN"

[root@elk-1 ~]# systemctl restart kibana
[root@elk-1 ~]#  systemctl enable elasticsearch

kibana部署成功

4.部署zookeeper

4.1.配置zookeeper-1节点

1.下载软件
[root@elk-1 ~]# wget http://archive.apache.org/dist/zookeeper/zookeeper-3.4.14/zookeeper-3.4.14.tar.gz

2.解压并移动zookeeper
[root@elk-1 ~]# tar xf soft/zookeeper-3.4.13.tar.gz -C /data/
[root@elk-1 ~]# mv /data/zookeeper-3.4.13/ /data/zookeeper

3.创建数据目录和日志目录
[root@elk-1 ~]# mkdir /data/zookeeper/{data,logs}

4.准备配置文件
[root@elk-1 ~]# cd /data/zookeeper/conf
[root@elk-1 /data/zookeeper/conf]# cp zoo_sample.cfg zoo.cfg
[root@elk-1 /data/zookeeper/conf]# vim zoo.cfg 
tickTime=2000
initLimit=10
syncLimit=5
dataDir=/data/zookeeper/data
DataLogDir=/data/zookeeper/logs
clientPort=2181

server.1=192.168.81.210:2888:3888
server.2=192.168.81.220:2888:3888
server.3=192.168.81.230:2888:3888

5.生成节点id文件
#节点id只能保护数字
[root@elk-1 /data/zookeeper]# echo 1 > /data/zookeeper/data/myid

4.2.配置zookeeper-2节点

与zookeeper-1节点只有配置文件和节点id文件有点不同，其余全一样

[root@elk-2 /data/zookeeper/conf]# cat zoo.cfg 
tickTime=2000
initLimit=10
syncLimit=5
dataDir=/data/zookeeper/data
DataLogDir=/data/zookeeper/logs
clientPort=2181

server.1=192.168.81.210:2888:3888
server.2=192.168.81.220:2888:3888
server.3=192.168.81.230:2888:3888

[root@elk-2 /data/zookeeper/conf]# echo 2 > /data/zookeeper/data/myid

4.3.配置zookeeper-3节点

[root@elk-3 /data/zookeeper/conf]# cat zoo.cfg 
tickTime=2000
initLimit=10
syncLimit=5
dataDir=/data/zookeeper/data
DataLogDir=/data/zookeeper/logs
clientPort=2181

server.1=192.168.81.210:2888:3888
server.2=192.168.81.220:2888:3888
server.3=192.168.81.230:2888:3888

[root@elk-3 /data/zookeeper/conf]# echo 3 > /data/zookeeper/data/myid

4.4.启动所有节点

zookeeper集群必须保证有两个节点存活，也就是说必须同时要启动两个节点，否则集群将启动不成功，因此要都修改好配置文件后，再统一启动

[root@elk-1 /data/zookeeper]# ./bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /data/zookeeper/bin/../conf/zoo.cfg
Mode: follower

[root@elk-2 /data/zookeeper]# ./bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /data/zookeeper/bin/../conf/zoo.cfg
Mode: follower

[root@elk-3 /data/zookeeper]# ./bin/zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /data/zookeeper/bin/../conf/zoo.cfg
Mode: leader

5.部署kafka

注意：不要使用kafka2.11版本，有严重的bug，filebeat无法写入数据到kafka集群，写入的协议版本不同，存在问题

5.1.配置kafka-1节点

1.下载二进制包
[root@elk-1 ~]# wget https://archive.apache.org/dist/kafka/2.0.0/kafka_2.11-2.0.0.tgz

2.安装kafka
[root@elk-1 ~/soft]# tar xf kafka_2.13-2.4.0.tgz -C /data/
[root@elk-1 ~]# mv /data/kafka_2.13-2.4.0 /data/kafka

3.修改配置文件
[root@elk-1 ~]# cd /data/kafka
[root@elk-1 /data/kafka]# vim config/server.properties 
broker.id=1
listeners=PLAINTEXT://192.168.81.210:9092
host.name=192.168.81.210
advertised.listeners=PLAINTEXT://192.168.81.210:9092
advertised.host.name=192.168.81.210
num.network.threads=3
num.io.threads=8
socket.send.buffer.bytes=102400
socket.receive.buffer.bytes=102400
socket.request.max.bytes=104857600
log.dirs=/data/kafka/data
num.partitions=3
delete.topic.enable=true
auto.create.topics.enable=true 
replica.fetch.max.bytes=5242880
num.recovery.threads.per.data.dir=1
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=3
transaction.state.log.min.isr=3
message.max.byte=5242880
log.cleaner.enable=true
log.retention.hours=48
log.segment.bytes=1073741824
log.retention.check.interval.ms=15000
zookeeper.connect=192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181
zookeeper.connection.timeout.ms=60000
group.initial.rebalance.delay.ms=0

4.创建数据目录
[root@elk-3 ~]# mkdir /data/kafka/data

5.2.配置kafka-2节点

只是配置文件不同，其余与kafka-1节点操作一致

配置文件需要改的地方：broker.id改成2，表示第二个节点 listeners host.name advertised.listeners advertised.host.name改成本机ip地址

[root@elk-2 /data/kafka]# cat config/server.properties 
broker.id=2
listeners=PLAINTEXT://192.168.81.220:9092
host.name=192.168.81.220
advertised.listeners=PLAINTEXT://192.168.81.220:9092
advertised.host.name=192.168.81.220
num.network.threads=3
num.io.threads=8
socket.send.buffer.bytes=102400
socket.receive.buffer.bytes=102400
socket.request.max.bytes=104857600
log.dirs=/data/kafka/data
num.partitions=3
delete.topic.enable=true
auto.create.topics.enable=true 
replica.fetch.max.bytes=5242880
num.recovery.threads.per.data.dir=1
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=3
transaction.state.log.min.isr=3
message.max.byte=5242880
log.cleaner.enable=true
log.retention.hours=48
log.segment.bytes=1073741824
log.retention.check.interval.ms=15000
zookeeper.connect=192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181
zookeeper.connection.timeout.ms=60000
group.initial.rebalance.delay.ms=0

5.3.配置kafka-3节点

只是配置文件不同，其余与kafka-1节点操作一致

配置文件需要改的地方：broker.id改成3，表示第三个节点 listeners host.name advertised.listeners advertised.host.name改成本机ip地址

[root@elk-3 /data/kafka]# cat config/server.properties 
broker.id=3
listeners=PLAINTEXT://192.168.81.230:9092
host.name=192.168.81.230
advertised.listeners=PLAINTEXT://192.168.81.230:9092
advertised.host.name=192.168.81.230
num.network.threads=3
num.io.threads=8
socket.send.buffer.bytes=102400
socket.receive.buffer.bytes=102400
socket.request.max.bytes=104857600
log.dirs=/data/kafka/data
num.partitions=3
delete.topic.enable=true
auto.create.topics.enable=true 
replica.fetch.max.bytes=5242880
num.recovery.threads.per.data.dir=1
offsets.topic.replication.factor=3
transaction.state.log.replication.factor=3
transaction.state.log.min.isr=3
message.max.byte=5242880
log.cleaner.enable=true
log.retention.hours=48
log.segment.bytes=1073741824
log.retention.check.interval.ms=15000
zookeeper.connect=192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181
zookeeper.connection.timeout.ms=60000
group.initial.rebalance.delay.ms=0

5.4.启动kafka

[root@elk-1 ~]# /data/kafka/bin/kafka-server-start -daemon /data/kafka/config/server.properties
[root@elk-2 ~]# /data/kafka/bin/kafka-server-start -daemon /data/kafka/config/server.properties
[root@elk-3 ~]# /data/kafka/bin/kafka-server-start -daemon /data/kafka/config/server.properties

6.测试kafka与zookeeper连接

kafka能够产生数据并消费，整个集群就可以使用了

1.创建一个topic
[root@elk-1 /data/kafka]# ./bin/kafka-topics.sh --create --zookeeper 192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181 --replication-factor 1 --partitions 1 --topic testpic
Created topic "testpic".

2.查看topic
[root@elk-1 /data/kafka]# ./bin/kafka-topics.sh --list --zookeeper 192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181
testpic

3.查看topic的描述信息
[root@elk-1 /data/kafka]# ./bin/kafka-topics.sh --describe --zookeeper 192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181 --topic testpic

4.使用kafka-console-producer控制台生产数据
[root@elk-1 /data/kafka]# ./bin/kafka-console-producer.sh --broker-list 192.168.81.210:9092,192.168.81.220:9092,192.168.81.230:9092 --topic testpic
>test1
>test2
>test3
>test4
>test5
>test6
>test7
>test8
>test9
>test10


5.使用kafka-console-consumer控制台消费数据
[root@elk-1 /data/kafka]# ./bin/kafka-console-consumer.sh --bootstrap-server 192.168.81.210:9092,192.168.81.220:9092,192.168.81.230:9092 --topic testpic --from-beginning
test1
test2
test3
test4
test5
test6
test7
test8
test9
test10


#删除一个topic
[root@elk-1 /data/kafka]# ./bin/kafka-topics.sh --delete --zookeeper 192.168.81.210:2181  --topic testpic

7.配置filebeat收集nginx、tomcat日志并存储到kafka中

7.1.安装并配置nginx服务

1.安装nginx
[root@elk-3 ~]# yum -y install nginx

2.配置nginx日志格式
[root@elk-3 ~]# vim /etc/nginx/nginx.conf
http {
··············
    log_format  main '{"时间":"$time_iso8601",'
                       '"客户端外网地址":"$http_x_forwarded_for",'
                       '"客户端内网地址":"$remote_addr",'
                       '"状态码":$status,'
                       '"传输流量":$body_bytes_sent,'
                       '"跳转来源":"$http_referer",'
                       '"URL":"$request",'
                       '"浏览器":"$http_user_agent",'
                       '"请求响应时间":$request_time,'
                       '"后端地址":"$upstream_addr"}';

    access_log  /var/log/nginx/access.log  main;
··············
}

2.启动nginx
[root@elk-3 ~]# systemctl start nginx
[root@elk-3 ~]# systemctl enable nginx

4.访问产生日志查看效果
[root@elk-3 ~]# curl 127.0.0.1
[root@elk-3 ~]# tail /var/log/nginx/access.log 
{"时间":"2021-07-12T11:29:33+08:00","客户端外网地址":"-","客户端内网地址":"127.0.0.1","状态码":200,"传输流量":4833,"跳转来源":"-","URL":"GET / HTTP/1.1","浏览器":"curl/7.29.0","请求响应时间":0.000,"后端地址":"-"}

7.2.安装tomcat服务

[root@elk-3 ~]# tar xf apache-tomcat-8.5.12.tar.gz -C /data/
[root@elk-3 ~]# mv /data/apache-tomcat-8.5.12/ /data/tomcat
[root@elk-3 ~]# /data/tomcat/bin/startup.sh 
Using CATALINA_BASE:   /data/tomcat
Using CATALINA_HOME:   /data/tomcat
Using CATALINA_TMPDIR: /data/tomcat/temp
Using JRE_HOME:        /usr
Using CLASSPATH:       /data/tomcat/bin/bootstrap.jar:/data/tomcat/bin/tomcat-juli.jar
Tomcat started.

7.3.安装filebeat服务

[root@elk-3 ~]# rpm -ivh filebeat-7.6.0-x86_64.rpm ```

7.4.配置filebeat收集应用日志并存储到kafka

1.配置filebeat
[root@elk-3 ~]# vim /etc/filebeat/filebeat.yml 
filebeat.inputs:
- type: log                                      #类型为log
  enabled: true
  paths:                                        #指定日志所在的路径
    - /var/log/nginx/access.log
  json.keys_under_root: true                    #支持json格式的日志输出
  json.overwriite_keys: true
  fields:                                       #在日志中增加一个字段，字段为log_topic，值为nginx_access，logstash根据带有这个字段的日志存储到指定的es索引库
    log_topic: nginx-access
  tail_files: true                              #开启日志监控，从日志的最后一行开始收集

- type: log
  enabled: true
  paths:
    - /data/tomcat/logs/catalina.out
  multiline.pattern: '^20'                      #收集tomcat错误日志，从第一个20到下一个20之间的日志整合在一行中显示
  multiline.negate: true
  multiline.match: after
  fields:
    log_topic: tomcat-cata
  tail_files: true

output.kafka:                                   #输出到kafka系统
  enabled: true
  hosts: ["192.168.81.210:9092","192.168.81.220:9092","192.168.81.230:9092"]                           #kafka的地址
  topic: '%{[fields][log_topic]}'               #指定将日志存储到kafka集群的哪个topic中，这里的topic值是引用在inputs中定义的fields，通过这种方式可以将不同路径的日志分别存储到不同的topic中
  partition.round_robin:
    reachable_only: false
  required_acks: 1
  compression: gzip
  max_message_bytes: 1000000

2.启动filebeat
[root@elk-3 ~]# systemctl start filebeat
[root@elk-3 ~]# systemctl enable filebeat

7.5.产生程序日志数据观察数据是否存储kafka

1.产生程序日志

1.产生nginx日志
[root@elk-3 ~]# ab -n 1000 -c 100 http://127.0.0.1/index.html

2.产生tomcat日志
[root@elk-3 ~]# /data/tomcat/bin/shutdown.sh
[root@elk-3 ~]# /data/tomcat/bin/startup.sh

2.观察kafka中是否创建对应的topic

[root@elk-1 /data/kafka]# ./bin/kafka-topics.sh --list --zookeeper 192.168.81.210:2181,192.168.81.220:2181,192.168.81.230:2181
__consumer_offsets
nginx-access
testpic
tomcat-cata

#nginx-access以及tomcat-cata的topic已经创建成功

3.观察kafka日志的输出

[root@elk-1 /data/kafka]# tail -f logs/kafkaServer.out

8.配置logstash从kafka中读取数据并存储到es集群

部署logstash，配置logstash从kafka中读取topic数据并存储到es集群

8.1.部署logstash服务

1.安装logstash
[root@elk-3 ~]# rpm -ivh logstash-7.6.0.rpm

8.2.配置logstash从kafka读取数据存储到es集群

[root@elk-3 ~]# cat /etc/logstash/conf.d/in_kafka_to_es.conf 
#从kafka中读取日志数据
input {				#数据源端
	kafka {				#类型为kafka
		bootstrap_servers => ["192.168.81.210:9092,192.168.81.220:9092,192.168.81.230:9092"]			#kafka集群地址
		topics => ["nginx-access","tomcat-cata"]			#要读取那些kafka topics
		codec => "json"										#处理json格式的数据
		auto_offset_reset => "latest"						#只消费最新的kafka数据
	}
}

#处理数据，去掉没用的字段
filter {
	if[fields][log_topic] == "nginx-access" {			#如果log_topic字段为nginx-access则进行以下数据处理
	    json {					#json格式数据处理
	         source => "message"			#source等于message的
	         remove_field => ["@version","path","beat","input","log","offset","prospector","source","tags"]			#删除指定的字段
	    }
	    mutate {			#修改数据
	         remove_field => ["_index","_id","_type","_version","_score","referer","agent"]			#删除没用的字段
	    }
	}
	
	if[fields][log_topic] == "tomcat-cata" {		#如果log_topic字段为tomcat-cata
	    grok {				#解析格式
		 match => {
		      "message" => "(?<时间>20[0-9]{2}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}) \\[(?<线程名称>[^\\s]{0,})\\] (?<日志等级>\\w+) (?<类名称>[^\\s]{0,}) (?<日志详情>[\\W\\w]+)" 			#将message的值增加上一些格式
		 }
	    }
	    mutate {			#修改数据
                 remove_field => ["_index","_id","_type","_version","_score","referer","agent"]			#删除没用的字段
            }  
	}
}

#数据处理后存储es集群
output {				#目标端
	if[fields][log_topic] == "nginx-access" {			#如果log_topic的字段值为nginx-access就存到下面的es集群里
	    elasticsearch {						
		action => "index"			#类型为索引
		hosts => ["192.168.81.210:9200","192.168.81.220:9200","192.168.81.230:9200"]		#es集群地址
		index => "nginx-access-%{+YYYY.MM.dd}"			#存储到es集群的哪个索引里
		codec => "json"						#处理json格式的解析
	    } 
	}
	
	if[fields][log_topic] == "tomcat-cata" {				#如果log_topic的字段值为tomcat-cata就存到下面的es集群里
	    elasticsearch {
		action => "index"				#类型为索引
		hosts => ["192.168.81.210:9200","192.168.81.220:9200","192.168.81.230:9200"]			#es集群地址
		index => "tomcat-cata-%{+YYYY.MM.dd}"			#存储到es集群的哪个索引里
		codec => "json"						#处理json格式的解析
	    } 
	}	    
}

8.3.启动logstash并观察日志

[root@elk-3 ~]# nphup /usr/share/logstash/bin/logstash -f /etc/logstash/conf.d/in_kafka_to_es.conf &

观察日志的输出，已经从nginx-access、tomcat-cata topic中读取了数据并存到了es集群中

8.4.查看elasticsearch集群是否增加了对应的索引库

es集群已经生成了tomcat-cata以及nginx-access索引库

到此为止logstash已经成功从kafka集群读取到日志数据，然后传入到elasticsearch集群不同的索引库

9.在kibana上关联elasticsearch索引库浏览日志数据

9.1.在kibana上添加nginx-access索引模式

1）点击创建索引

2）填写索引名

采用通配符的方式，填写完点击下一步完成创建即可

3）添加一个时间筛选字段

4）创建成功

9.2.同样方法添加tomcat-cata索引模式

9.3.查询nginx-access索引日志数据

9.4.查看tomcat-cata索引日志数据

10.报错合集

10.1.es启动时报错无法指定被请求的地址

报错内容如下

解决方法：仔细检查配置文件，肯定是某个地址配置错了，我的就是监听地址的ip写错了

10.2.filebeat写入数据到kafka api版本报错

报错如下：

分析解决思路：初步判定为kafka2.11版本问题导致的，换成2.13问题解决

以上是关于部署ELK+Kafka+Filebeat日志收集分析系统的主要内容，如果未能解决你的问题，请参考以下文章

ELK日志系统设计方案-Filebeat日志收集推送Kafka

ELK日志系统设计方案-Filebeat日志收集推送Kafka

ELK日志系统设计方案-Filebeat日志收集推送Kafka

ELK日志系统设计方案-Filebeat日志收集推送Kafka

ELK——Filebeat介绍及部署

Kafka+Zookeeper+Filebeat+ELK 搭建日志收集系统