基于VMware的虚拟Linux集群搭建-lvs+keepalived

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了基于VMware的虚拟Linux集群搭建-lvs+keepalived相关的知识,希望对你有一定的参考价值。

通过keepalived实现lvs服务器的的双机热备和真实服务器之间的负载均衡blog挺多的,在搭建的时候也参考了相关博文,不同人搭建的实验环境不一样,本文是基于VM搭建的虚拟集群环境,全部虚拟机网卡模式为NAT方式相连,处于同一网段。

 

搭建环境:

使用redhead 2.6.32-431.el6.x86_64版本的linux,创建四台,配置相关网络信息,确保同一网段下。

技术分享

配置好各自ip即可,虚拟ip在配置lvs时设定。


安装配置LVS

1.在主备Lvs上安装ipvsadm和keepalived

LVS是通过IPVS模块实现的,检查kernel是否支持LVS的IPVS模块,再安装IPVS管理软件ipvsadm

[[email protected] ~]# modprobe -l | grep ipvs

kernel/net/netfilter/ipvs/ip_vs.ko

kernel/net/netfilter/ipvs/ip_vs_rr.ko

kernel/net/netfilter/ipvs/ip_vs_wrr.ko

kernel/net/netfilter/ipvs/ip_vs_lc.ko

kernel/net/netfilter/ipvs/ip_vs_wlc.ko

kernel/net/netfilter/ipvs/ip_vs_lblc.ko

kernel/net/netfilter/ipvs/ip_vs_lblcr.ko

kernel/net/netfilter/ipvs/ip_vs_dh.ko

kernel/net/netfilter/ipvs/ip_vs_sh.ko

kernel/net/netfilter/ipvs/ip_vs_sed.ko

kernel/net/netfilter/ipvs/ip_vs_nq.ko

kernel/net/netfilter/ipvs/ip_vs_ftp.ko

kernel/net/netfilter/ipvs/ip_vs_pe_sip.ko

安装ipvsadm

[[email protected] ~]# yum install ipvsadm

能通过ipvsadm --help查看相关信息即安装成功。

 

安装keepalived

安装依赖库:yum install -y openssl openssl-devel(我是缺这两个,具体编译时候如果报错则安装相关提示补安装相关缺漏)

下载keepalived:

http://www.keepalived.org/software/keepalived-1.2.6.tar.gz

 

安装命令:

# tar zxvf keepalived-1.2.6.tar.gz

# cd keepalived-1.2.6

# ./configure --sysconf=/etc --with-kernel-dir=/lib/modules/2.6.32-431.el6.x86_64 #指定配置文件存放路径,指定使用内核源码中的头文件。

#make

#make install

#ln -s /usr/local/sbin/keepalived /sbin/ #把启动命令软连接到sbin,方便以后直接使用

能通过keepalived --help查看相关信息即安装成功。

 

配置LVS

LVS

! Configuration File for keepalived

 

global_defs {

   notification_email { #配置告警邮件发送

      XXXX@qq.com

   }

   notification_email_from [email protected]

   smtp_server 192.168.200.1

   smtp_connect_timeout 30

   router_id LVS_DEVEL

}

 

vrrp_instance VI_1 {

    state MASTER #主LVS标志

    interface eth1 #设置对外服务口

    virtual_router_id 51

    priority 100 #设置优先级,优先级高的为主机

    advert_int 1 #设置同步时间间隔

    authentication { #设置主备LVS验证类型和密码,两边必须一致

        auth_type PASS

        auth_pass 1111

    }

    virtual_ipaddress { #设置虚拟服务IP

        192.168.153.110

    }

}

 

virtual_server 192.168.153.110 80 {

    delay_loop 6 #健康检查时间间隔

    lb_algo rr #负载均衡算法,此为轮询算法

    lb_kind DR #负载均衡转发规则,也就是IP转发规则,DR转发方式最快,但是所有机器必须在一个网段内,还有NAT和TUNEL两种转发方式

    protocol TCP

 

    real_server 192.168.153.131 80 {

        weight 1

        TCP_CHECK {

            connect_timeout 3

            nb_get_retry 3

            delay_before_retry 3

        }

    }

 

    real_server 192.168.153.135 80 {

        weight 1

        TCP_CHECK {

            connect_timeout 3

            nb_get_retry 3

            delay_before_retry 3

        }

    }

 

}

 

备用LVS配置:复制上面配置修改两处即可:1.state MASTER改为state BACKUP 2.将priority 100改低,这里改为80

 

配置Realserver

对所有Realserver重复做一下步骤

在/etc/init.d下创建脚本lvsrs

  1 #!/bin/bash

  2

  3 VIP=192.168.153.110

  4 ./etc/rc.d/init.d/functions

  5 case "$1" in

  6 start)

  7         echo "Start LVS of Realserver!"

  8         /sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up

  9         echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore

 10         echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce

 11         echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore

 12         echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce

 13

 14 ;;

 15

 16 stop)

 17

 18         /sbin/ifconfig lo:0 down

 19         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore

 20         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce

 21         echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore

 22         echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce

 23         echo "RealServer Stoped"

 24

 25 ;;

 26

 27 *)

 28

 29         echo "Usage: $0 {start|stop}"

 30

 31         exit 1

 32

 33  esac

 

修改其执行权限:chmod 755 /etc/init.d/lvsrs

 

执行启动脚本:

#service lvsrs start

 

查看其ip:

lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::1/128 Scope:Host

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:8 errors:0 dropped:0 overruns:0 frame:0

          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0

          RX bytes:480 (480.0 b)  TX bytes:480 (480.0 b)

 

lo:0      Link encap:Local Loopback  

          inet addr:192.168.153.110  Mask:255.255.255.255

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

 

在realserver上安装apache并且启动!

 /var/www/hmtl/下添加index.html测试主页,不同server用不同界面进行区分。

 

启动LVS并且测试:

主备LVS启动:/etc/init.d/keepalived start

查看启动状态:

主LVS:

Feb  4 20:11:41 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Transition to MASTER STATE

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering MASTER STATE

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) setting protocol VIPs.

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb  4 20:11:42 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 added

Feb  4 20:11:47 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

备LVS:

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Received higher prio advert

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering BACKUP STATE

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) removing protocol VIPs.

Feb  4 20:18:16 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 removed

Feb  4 20:19:06 rex dhclient[1265]: DHCPREQUEST on eth2 to 192.168.153.254 port 67 (xid=0x6f9b7b38)

 

用ip addr和ipvsadm查看路由情况

主LVS# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

    link/ether 00:0c:29:3e:ce:ce brd ff:ff:ff:ff:ff:ff

    inet 192.168.153.133/24 brd 192.168.153.255 scope global eth1

    inet 192.168.153.110/32 scope global eth1

    inet6 fe80::20c:29ff:fe3e:cece/64 scope link

       valid_lft forever preferred_lft forever

 

备LVS# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

    link/ether 00:0c:29:0e:6c:b0 brd ff:ff:ff:ff:ff:ff

    inet 192.168.153.134/24 brd 192.168.153.255 scope global eth2

    inet6 fe80::20c:29ff:fe0e:6cb0/64 scope link

       valid_lft forever preferred_lft forever

 

[[email protected] ~]# ipvsadm

IP Virtual Server version 1.2.1 (size=4096)

Prot LocalAddress:Port Scheduler Flags

  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn

TCP  bogon:http rr

  -> bogon:http                   Route   1      0          0         

  -> bogon:http                   Route   1      0          0   

 

测试:

 

1.高可用性功能测试--主备lvs切换

把主lvs stop!然后查看备lvs日志,然后把主恢复,再看备lvs的日志

Feb  4 20:11:41 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Transition to MASTER STATE

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering MASTER STATE

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) setting protocol VIPs.

Feb  4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb  4 20:11:42 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 added

Feb  4 20:11:47 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Received higher prio advert

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering BACKUP STATE

Feb  4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) removing protocol VIPs.

Feb  4 20:18:16 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 removed

Feb  4 20:19:06 rex dhclient[1265]: DHCPREQUEST on eth2 to 192.168.153.254 port 67 (xid=0x6f9b7b38)

Feb  4 20:19:06 rex dhclient[1265]: DHCPACK from 192.168.153.254 (xid=0x6f9b7b38)

Feb  4 20:19:06 rex dhclient[1265]: bound to 192.168.153.134 -- renewal in 737 seconds.

Feb  4 20:19:06 rex NetworkManager[1241]: <info> (eth2): DHCPv4 state changed renew -> renew

Feb  4 20:19:06 rex NetworkManager[1241]: <info>   address 192.168.153.134

Feb  4 20:19:06 rex NetworkManager[1241]: <info>   prefix 24 (255.255.255.0)

Feb  4 20:19:06 rex NetworkManager[1241]: <info>   gateway 192.168.153.2

Feb  4 20:19:06 rex NetworkManager[1241]: <info>   nameserver ‘192.168.153.2‘

Feb  4 20:19:06 rex NetworkManager[1241]: <info>   domain name ‘localdomain‘

 

2.负载均衡测试

在本地浏览器上访问192.168.153.110,不断刷新,可以看到代表不同realserver的主界面。

技术分享

技术分享

3.故障切换测试

把realserver1的服务stop掉,查看LVS的日志,然后恢复再看:

Feb  4 20:25:59 rex Keepalived_healthcheckers[9588]: Netlink reflector reports IP 192.168.153.110 added

Feb  4 20:26:04 rex Keepalived_vrrp[9589]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.153.110

Feb  4 20:27:53 rex Keepalived_healthcheckers[9588]: TCP connection to [192.168.153.135]:80 failed !!!

Feb  4 20:27:53 rex Keepalived_healthcheckers[9588]: Removing service [192.168.153.135]:80 from VS [192.168.153.110]:80

Feb  4 20:27:53 rex Keepalived_healthcheckers[9588]: Remote SMTP server [192.168.200.1]:25 connected.

Feb  4 20:28:14 rex Keepalived_healthcheckers[9588]: Error reading data from remote SMTP server [192.168.200.1]:25.

Feb  4 20:28:29 rex Keepalived_healthcheckers[9588]: TCP connection to [192.168.153.135]:80 success.

Feb  4 20:28:29 rex Keepalived_healthcheckers[9588]: Adding service [192.168.153.135]:80 to VS [192.168.153.110]:80

Feb  4 20:28:29 rex Keepalived_healthcheckers[9588]: Remote SMTP server [192.168.200.1]:25 connected.


本文出自 “走在产品路上的运维dog~” 博客,请务必保留此出处http://vrfxie.blog.51cto.com/11026252/1894947

以上是关于基于VMware的虚拟Linux集群搭建-lvs+keepalived的主要内容,如果未能解决你的问题,请参考以下文章

MySQL集群搭建-MMM+LVS+Keepalived

2018-06-07 动手搭建lvs

Hadoop集群+Spark集群搭建基于VMware虚拟机教程

LVS负载均衡集群服务搭建详解

LVS负载均衡集群服务搭建详解

Hadoop集群+Spark集群搭建基于VMware虚拟机教程+安装运行Docker