Oracle11G DG 搭建及管理
Posted 浮生若夢sky
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了Oracle11G DG 搭建及管理相关的知识，希望对你有一定的参考价值。
一、准备工作
- 环境准备
- 主数据库Oracle Database安装
- 备服务器Oracle Database software 安装
二、正式配置ADG
三、ADG基本管理
--------------------------------------------------------------分割线-------------------------------------------------------------
一、准备工作
1.环境配置：
主机配置
| 节点 | 操作系统 | 主机名称 | IP地址 |
| 主库 | CentOS6.4_x86_64 | dgp | 192.168.10.61 |
| 备库 | CentOS6.4_x86_64 | dgs | 192.168.10.62 |
修改主机名：
[root@db /]# cat /etc/sysconfig/network
[root@db /]# sed -i s/HOSTNAME=.*/HOSTNAME=dgp/ /etc/sysconfig/network
[root@db /]# reboot
规划数据库配置
| 节点 | Oracle版本 | SID | db_name |
db_unique_name |
| 主库 | 11.2.0.4 | orcl | orcl | orcl |
| 备库 | 11.2.0.4 | orcl | orcl | orcl_std |
以上完成之后，对两台主机进行以下操作：
1）禁用防火墙
[root@dgp ~]# chkconfig iptables off
[root@dgp ~]# service iptables stop
2）禁用selinux
[root@dgp ~]# sed -i s/SELINUX=.*/SELINUX=disabled/ /etc/sysconfig/selinux
[root@dgp ~]# setenforce 0
3）配置host文件
[root@dgp ~]# cat /etc/hosts
[root@dgp ~]# echo -e \'192.168.10.61 dgp \\n192.168.10.62 dgs\' >>/etc/hosts
备注：echo -e 表示开启转义。
4）软件准备
数据库文件如下：
p13390677_112040_Linux-x86-64_1of7.zip
p13390677_112040_Linux-x86-64_2of7.zip
创建路径 /install路径，上传安装文件并解压。
[root@dgp /]# mkdir /install
[root@dgp /]# cd /install
[root@dgp /]# unzip p13390677_112040_Linux-x86-64_1of7.zip
[root@dgp /]# unzip p13390677_112040_Linux-x86-64_1of7.zip
2.主数据库Oracle Database安装
配置最小参数
修改参数文件/etc/sysctl.conf
[root@dgp /]# echo \'fs.suid_dumpable = 1 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.shmall = 2097152 kernel.shmmax = 536870912 kernel.shmmni = 4096 # semaphores: semmsl, semmns, semopm, semmni kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default=262144 net.core.rmem_max=4194304 net.core.wmem_default=262144 net.core.wmem_max=1048586\' >> /etc/sysctl.conf
执行命令使配置生效
[root@dgp /]# /sbin/sysctl -p
修改limits.conf
添加以下内容到配置文件/etc/security/limits.conf：
[root@db /]# echo \'oracle soft nproc 16384 oracle hard nproc 16384 oracle soft nofile 4096 oracle hard nofile 65536 oracle soft stack 10240\' >> /etc/security/limits.conf
安装必要的rpm包
[root@dgp /]# yum install -y binutils-2*x86_64* glibc-2*x86_64* nss-softokn-freebl-3*x86_64* glibc-2*i686* nss-softokn-freebl-3*i686* compat-libstdc++-33*x86_64* yum install -y glibc-common-2*x86_64* glibc-devel-2*x86_64* glibc-devel-2*i686* glibc-headers-2*x86_64* elfutils-libelf-0*x86_64* yum install -y elfutils-libelf-devel-0*x86_64* gcc-4*x86_64* gcc-c++-4*x86_64* ksh-*x86_64* libaio-0*x86_64* yum install -y libaio-devel-0*x86_64* libaio-0*i686* libaio-devel-0*i686* libgcc-4*x86_64* libgcc-4*i686* libstdc++-4*x86_64* libstdc++-4*i686* yum install -y libstdc++-devel-4*x86_64* make-3.81*x86_64* numactl-devel-2*x86_64* sysstat-9*x86_64* compat-libstdc++-33*i686* compat-libcap*
创建配置用户
[root@dgp /]# groupadd -g 501 oinstall groupadd -g 502 dba groupadd -g 503 oper groupadd -g 504 asmadmin groupadd -g 506 asmdba groupadd -g 505 asmoper useradd -u 502 -g oinstall -G dba,asmdba,oper oracle
[root@dgp install]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is too simplistic/systematic
Retype new password:
passwd: all authentication tokens updated successfully.
修改"/etc/security/limits.d/90-nproc.conf" 文件中的内容
将 “* soft nproc 1024”这一行修改为“* - nproc 16384”
[root@dgp /]# cp /etc/security/limits.d/90-nproc.conf /etc/security/limits.d/90-nproc.conf_bak
[root@dgp /]# sed -i s/.*1024/*\\ -\\ nproc\\ 16384/ /etc/security/limits.d/90-nproc.conf
创建数据库安装路径
[root@dgp /]# mkdir -p /u01/app/oracle/product/11.2.0/db_1
chown -R oracle:oinstall /u01
chmod -R 775 /u01
登录oracle用户,并在 ".bash_profile" 文件尾部添加内容。
[root@dgp /]# su - oracle
[oracle@dgp /]$ pwd
[oracle@dgp /]$ cat >> .bash_profile <<\'EOF\'
#Oracle Settings TMP=/tmp; export TMP TMPDIR=$TMP; export TMPDIR ORACLE_HOSTNAME=dgp; export ORACLE_HOSTNAME ORACLE_UNQNAME=orcl; export ORACLE_UNQNAME ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1; export ORACLE_HOME ORACLE_SID=orcl; export ORACLE_SID PATH=/usr/sbin:$PATH; export PATH PATH=$ORACLE_HOME/bin:$PATH; export PATH LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
EOF
备注：配置备库时候：ORACLE_HOSTNAME=dgs ORACLE_UNQNAME=orcl_std ORACLE_SID=orcl
安装数据库
直接以Oracle用户登录,执行安装
[oracle@dgp /]$ cd /install/database、
[oracle@dgp /]$ ll
[oracle@dgp /]$ ./runInstaller
图形界面忽略,过程中在root用户下执行脚本。
[root@dgp ~]# /u01/app/oraInventory/orainstRoot.sh [root@dgp ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh
备注：主库选择安装数据库软件和数据库实例，备库仅安装数据库软件。
设置Oracle Database自启动
修改/etc/oratab配置文件中每一个重起标志设置成Y：
[root@dgp /]# sed -i \'s/\\(orcl:\\)\\(.*:\\)N/\\1\\2Y/\' /etc/oratab
创建自启动配置文件/etc/init.d/dbora：
[root@dgp /]# cat >> /etc/init.d/dbora <<EOF
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
ORA_HOME=/u01/app/oracle/product/11.2.0/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
\'start\')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
;;
\'stop\')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
;;
esac
EOF
赋予执行权限，添加自启动
[root@dgp ~]# chmod 750 /etc/init.d/dbora chkconfig --add dbora chkconfig dbora on
3.备服务器Oracle Database software 安装
备服务器安装software，过程参考主库数据库安装过程。
二、正式配置ADG
1.主库检查归档模式等：
在主库操作：
#查看log_mode、force_logging、flashback_on
SQL> select name,log_mode,force_logging,flashback_on from v$database;
#切换成归档模式
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE ARCHIVELOG; #修改成归档模式
#开启FORCE LOGGING
SQL> ALTER DATABASE FORCE LOGGING #开启FORCE LOGGING
#修改归档日志路径(按需修改，这里仅仅列出供参考)
#[oracle@dgp /]$ mkdir /u01/app/oracle/archivelog
#SQL> archive log list
#SQL> alter system set log_archive_dest_1=\'location=/u01/app/oracle/archivelog\';
SQL> alter database flashback on; #开启flashback on
SQL> ALTER DATABASE OPEN;
2.主库添加SRL：
注意：standby redo log比 redo log 多一个，并且大小保持一致。
SQL> select * from v$log;
SQL> select * from v$logfile;
SQL> alter database add standby logfile group 11 \'/u01/app/oracle/oradata/orcl/redo_std01.log\' size 50M;
SQL> alter database add standby logfile group 12 \'/u01/app/oracle/oradata/orcl/redo_std02.log\' size 50M;
SQL> alter database add standby logfile group 13 \'/u01/app/oracle/oradata/orcl/redo_std03.log\' size 50M;
SQL> alter database add standby logfile group 14 \'/u01/app/oracle/oradata/orcl/redo_std04.log\' size 50M;
3.主库修改参数：
#修改参数（可以用sql命令修改，也可以直接修改pfile文件）
[oracle@dgp /]$ sqlplus / as sysdba
SQL >
alter system set log_archive_config=\'DG_CONFIG=(orcl,orcl_std)\' scope=both;
alter system set log_archive_dest_1=\'LOCATION=USE_DB_RECOVERY_FILE_DESTVALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl\' scope=both; #主库log路径 alter system set log_archive_dest_2=\'SERVICE=orcl_std LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl_std\' scope=both; #备库log路径 alter system set log_archive_dest_state_1=\'enable\' scope=both; alter system set log_archive_dest_state_2=\'enable\' scope=both; # alter system set db_file_name_convert=\'/u01/oracle/datafile\',\'/u01/oracle/datafile\' scope=both; #主备路径一致，忽略 # alter system set log_file_name_convert=\'/u01/oracle/onlinelog\',\'/u01/oracle/onlinelog\' scope=both; #主备路径一致，忽略 alter system set fal_server=\'orcl_std\' scope=both; alter system set fal_client=\'orcl\' scope=both; alter system set standby_file_management=\'AUTO\' scope=both;
alter system set db_unique_name=\'orcl\' scope=both;
#检查主库pfile文件initorcl.ora
[oracle@dgp /]$ cat /u01/app/oracle/product/11.2.0/db_1/dbs/initorcl.ora
orcl.__db_cache_size=687865856
orcl.__java_pool_size=16777216
orcl.__large_pool_size=33554432
orcl.__oracle_base=\'/u01/app/oracle\'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=671088640
orcl.__sga_target=989855744
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=234881024
orcl.__streams_pool_size=0
*.audit_file_dest=\'/u01/app/oracle/admin/orcl/adump\'
*.audit_trail=\'db\'
*.compatible=\'11.2.0.4.0\'
*.control_files=\'/u01/app/oracle/oradata/orcl/control01.ctl\',\'/u01/app/oracle/fast_recovery_area/orcl/control02.ctl\'
*.db_block_size=8192
*.db_domain=\'\'
*.db_name=\'orcl\'
*.db_recovery_file_dest=\'/u01/app/oracle/fast_recovery_area\'
*.db_recovery_file_dest_size=4385144832
*.diagnostic_dest=\'/u01/app/oracle\'
*.dispatchers=\'(PROTOCOL=TCP) (SERVICE=orclXDB)\'
*.fal_client=\'orcl\'
*.fal_server=\'orcl_std\'
*.log_archive_dest_1=\'location=USE_DB_RECOVERY_FILE_DESTvalid_for=(all_logfiles,all_roles) db_unique_name=orcl\'
*.log_archive_dest_2=\'SERVICE=orcl_std LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl_std\'
*.log_archive_dest_state_1=\'enable\'
*.log_archive_dest_state_2=\'enable\'
*.memory_target=1660944384
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile=\'EXCLUSIVE\'
*.standby_file_management=\'AUTO\'
*.undo_tablespace=\'UNDOTBS1\'
*.db_unique_name=\'orcl\'
*.log_archive_config=\'DG_CONFIG=(orcl,orcl_std)\'
检查完成确认无误后，重启数据库
SQL> shutdown immediate
SQL> start nomount
SQL> create spfile from pfile=\'/u01/app/oracle/product/11.2.0/db_1/dbs/initorcl.ora\'; #以pfile创建新的spfile
SQL> startup
SQL> show parameter spfile #确认以spfile启动
备注：备库的pfile、control file将安排和rman备份完成后创建，然后和其他文件一起copy至备库。
4.主库配listener.ora和tnsname.ora
（1）主库listener.ora配置：
[oracle@dgp admin]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(SID_NAME = orcl)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dgp)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = /u01/app/oracle
（2）主库tnsnames.ora配置：
[oracle@dgp admin]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dgp)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
ORCL_STD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dgs)(PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl_std)
)
)
（2）主库监听测试：
# [oracle@dgp ~]$ lsnrctl reload
[oracle@dgp ~]$ lsnrctl stop
[oracle@dgp ~]$ lsnrctl start
[oracle@dgp ~]$ lsnrctl status
[oracle@dgp ~]$ sqlplus system/****@orcl #测试是否正常
至此主库的配置结束,下面将为备库准备相关文件。
5.RMAN备份主库
#在主库操作
[oracle@dgp ~]$ rman target /
RMAN> backup database plus archivelog
#备注：注意一下rman输出内容中的备份文件路径
#备用命令： backup current controlfile for standby format \'/XXX/dbbackup/CTL_%U\'; backup database format \'/XXX/dbbackup/DB_%d_%U\' PLUS ARCHIVELOG;
6.创建备库pfile文件initorcl_std.ora
#在主库操作
[oracle@dgp ~]$ cd /u01/app/oracle/product/11.2.0/db_1/dbs
[oracle@dgp ~]$ cp initorcl.ora initorcl_std.ora
#修改initorcl_std.ora中内容，修改后的内容见下面新的initorcl_std.ora
#红色为DG相关参数，红色绿底为修改过的内容
[oracle@dgp ~]$ cat initorcl_std.ora
orcl.__db_cache_size=687865856
orcl.__java_pool_size=16777216
orcl.__large_pool_size=33554432
orcl.__oracle_base=\'/u01/app/oracle\'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=671088640
orcl.__sga_target=989855744
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=234881024
orcl.__streams_pool_size=0
*.audit_file_dest=\'/u01/app/oracle/admin/orcl/adump\'
*.audit_trail=\'db\'
*.compatible=\'11.2.0.4.0\'
*.control_files=\'/u01/app/oracle/oradata/orcl/control01.ctl\',\'/u01/app/oracle/fast_recovery_area/orcl/control02.ctl\'
*.db_block_size=8192
*.db_domain=\'\'
*.db_name=\'orcl\'
*.db_recovery_file_dest=\'/u01/app/oracle/fast_recovery_area\'
*.db_recovery_file_dest_size=4385144832
*.diagnostic_dest=\'/u01/app/oracle\'
*.dispatchers=\'(PROTOCOL=TCP) (SERVICE=orclXDB)\'
*.fal_client=\'orcl_std\'
*.fal_server=\'orcl\'
*.log_archive_dest_1=\'location=USE_DB_RECOVERY_FILE_DEST valid_for=(all_logfiles,all_roles) db_unique_name=orcl_std\'
*.log_archive_dest_2=\'SERVICE=orcl LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl\'
*.log_archive_dest_state_1=\'enable\'
*.log_archive_dest_state_2=\'enable\'
*.memory_target=1660944384
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile=\'EXCLUSIVE\'
*.standby_file_management=\'AUTO\'
*.undo_tablespace=\'UNDOTBS1\'
*.db_unique_name=\'orcl_std\'
*.log_archive_config=\'DG_CONFIG=(orcl,orcl_std)\'
7.创建备库控制文件
#在主库操作 [oracle@dgp ~]$ sqlplus / as sysdba SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS \'/u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl\'
8.传输文件至备库
需要copy至备库的文件有：rman备份、备库pfile、备库controlfile、listener.ora、tnsnames.ora、密码文件。
在备库上创建必要目录
在备库操作：
[root@dgs ~]# su - oracle
[oracle@dgs ~]$ mkdir -p /u01/app/oracle/oradata/orcl/
[oracle@dgs ~]$ mkdir -p /u01/app/oracle/fast_recovery_area/orcl/
[oracle@dgs ~]$ mkdir -p /u01/app/oracle/admin/orcl/adump
[oracle@dgs ~]$ mkdir -p /u01/app/oracle/fast_recovery_area/ORCL/
#[oracle@dgs ~]$ mkdir /u01/app/oracle/archivelog #忽略
配置主库oracle用户免密登录备库主机oracle用户
在主库操作: [oracle@dgp dbs]$ ssh-keygen #一直按回车 [oracle@dgp dbs]$ ssh-copy-id -i .ssh/id_rsa.pub oracle@dgs #输入备库oracle操作系统用户密码
开始copy文件至备库
# 1、controlfile 和 RMAN备份
[oracle@dgp ~]$ scp -r /u01/app/oracle/fast_recovery_area/ORCL/backupset oracle@dgs:/u01/app/oracle/fast_recovery_area/ORCL/
# 2、initorcl_std.ora 和 密码文件orapworcl
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0/db_1/dbs/initorcl_std.ora oracle@dgs:/u01/app/oracle/product/11.2.0/db_1/dbs/
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0/db_1/dbs/orapworcl oracle@dgs:/u01/app/oracle/product/11.2.0/db_1/dbs/
#3、listener.ora 和 tnsnames.ora
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora oracle@dgs:/u01/app/oracle/product/11.2.0/db_1/network/admin/
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora oracle@dgs:/u01/app/oracle/product/11.2.0/db_1/network/admin/
#复制备库控制文件至initorcl_std.ora指定位置（还是在主库操作，这里在主库ssh远程登录执行命令，避免切换窗口）
[oracle@dgp oracle]$ ssh oracle@dgs cp /u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl /u01/app/oracle/oradata/orcl/control01.ctl
[oracle@dgp oracle]$ ssh oracle@dgs cp /u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl /u01/app/oracle/fast_recovery_area/orcl/control02.ctl
至此，除listener.ora有待修改，备库的相关文件准备完成，下面将进入最后配置阶段。
9.备库配置监听
备库操作：
（1）修改监听件listener.ora
修改后查看，其他红色为修改的内容。
#注意：备库的SID_NAME为orcl，因此备库listener.ora静态监听SID_LIST_LISTENER中的配置SID_NAME = orcl，不能设为orcl_std,orcl_std是db_unique_name。
[oracle@dgs admin]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl_std)
(SID_NAME = orcl)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dgs)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = /u01/app/oracle
（2）备库的tnsnames.ora和主库一样，无需修改
（3）重启监听并验证
在备库：
[oracle@dgs ~]$ lsnrctl stop
[oracle@dgs ~]$ lsnrctl start
[oracle@dgs ~]$ lsnrctl status
[oracle@dgs ~]$ sqlplus sys/******@orcl as sysdba #在备库上登录主库
[oracle@dgs ~]$ sqlplus sys/******@orcl_std as sysdba #在备库上登录备库
在主库：
[oracle@dgs ~]$ sqlplus sys/******@orcl as sysdba #在主库上登录主库
[oracle@dgs ~]$ sqlplus sys/******@orcl_std as sysdba #在备库上登录备库
10.还原备库
#确认一下，至此备库相关文件均已修改完成。
备库RMAN恢复
[oracle@dgs oracle]$ export ORACLE_SID=orcl
[oracle@dgs oracle]$ sqlplus / as sysdba
SQL> create spfile from pfile=\'/u01/app/oracle/product/11.2.0/db_1/dbs/initorcl_std.ora\'; #创建备库spfile
SQL> startup mount;
SQL> show paramter spfile; #确认以spfile启动
SQL> exit
[oracle@dgs oracle]$ rman target /
RMAN> alter database mount; #或者alter database mount standby database;
RMAN> restore database；
RMAN> recover database；
11.开启同步并验证
# 此时主库数据库处于open状态，备库处于mount状态
（1）开启同步：
在备库操作
SQL> alter database open read only;
SQL> alter database recover managed standby database using current logfile disconnect from session；
（2）验证
在主库操作
SQL> create user mydb identified by ******;
SQL> alter system switch logfile;
在备库操作
SQL> select username from dba_users where name=\'MYDB\'
查看备库应用状态
SQL> select thread#,sequence#,standby_dest,archived,applied,status from v$archived_log;
三、基本管理
1.检查状态
查看数据库状态
select open_mode,protection_mode,database_role,switchover_status from v$database;
select max(sequence#) from v$log;--检查两边的序列好，是否一致
主库切换日志，
alert system switch logfile;
查看备库应用状态
select thread#,sequence#,standby_dest,archived,applied,status from v$archived_log;
查看有没有GAP
select * from v$archive_dest_status where dest_id=2;
select status,gap_status from v$archive_dest_status where dest_id=2;
备库查看RFS接收日志和MRP应用日志同步主库情况
select process, sequence#,GROUP#,thread#,status,delay_mins from v$managed_standby; #备库查询其中，其中ARCH是归档进程，RFS是归档传输进程，MRP0是日志应用进程
备库查看日志应用进度及数据库模式
select dbid,name,open_mode,current_scn,protection_mode,database_role,force_logging,open_mode,switchover_status from v$database;
2.启动数据库：
--先启备库
sql>startup nomount
sql>alter database mount standby database;
sql>alter database open; #或者alter database open read only;
sql>alter database recover managed standby database using current logfile disconnect from session;
--再启主库
sql>startup
3.关闭数据库
--先关主库：
sql>shutdown immediate
--再关备用库：
sql>alter database recover managed standby database cancel; --停止同步
sql>shutdown immediate;
4.GAP处理
就是有从库有日志尚未应用，存在着RESOLVABLE GAP ，解决方法如下：
SQL> select status,gap_status from v$archive_dest_status where dest_id=2;
STATUS GAP_STATUS
--------- ------------------------
ERROR RESOLVABLE GAP
#主库，将所有未传送的redo传送给从库，target_db_name使用DB_UNIQUE_NAME。
ALTER SYSTEM FLUSH REDO TO orcl_std;
#验证备库
SELECT UNIQUE THREAD# AS THREAD, MAX(SEQUENCE#) OVER (PARTITION BY thread#) AS LAST from V$ARCHIVED_LOG;
#如果必要，拷贝归档日志到从库，并进行注册
ALTER DATABASE REGISTER PHYSICAL LOGFILE \'filespec1\';
#再次检查
SELECT THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# FROM V$ARCHIVE_GAP;
--在目标从库上，停止日志应用
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
--在目标从库上
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
--如果日志确定丢失，可以采用激活方式，单这样会有数据丢失。
--ALTER DATABASE ACTIVATE PHYSICAL STANDBY DATABASE;
--验证目标从库
SELECT SWITCHOVER_STATUS FROM V$DATABASE;
--开始切换，如果状态为"TO PRIMARY."则WITH SESSION SHUTDOWN从句可以去掉。
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WITH SESSION SHUTDOWN;
--打开新主库
ALTER DATABASE OPEN;
5.主备切换
https://www.cnblogs.com/abclife/p/5416671.html
1)原主库检查切换状态
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS
--------------------
TO STANDBY
说明：状态为"TO STANDBY"说明原主库已准备好切换为备库。而此时原备库状态为：NOT ALLOWED
2）原主库切换角色
SQL> alter database commit to switchover to physical standby;
SQL> select name,open_mode,database_role,protection_mode,SWITCHOVER_STATUS From v$database; #检查新备库状态和角色
说明：原主库切换为standby,原备库还未切换，并且两个数据库角色均为STANDBY。并且原备库切换状态为由"NOT ALLOWED"转变为"TO PRIMARY"。
3）原备库检查切换状态
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS
--------------------
TO PRIMARY
4）原备库切换角色
SQL> alter database commit to switchover to primary;
SQL> alter database open; #正常打开，read write。
SQL> select name,open_mode,database_role,protection_mode,SWITCHOVER_STATUS From v$database; #检查新主库状态和角色
#至此角色切换完成。
5）新备库开启同步
SQL> alter database open; #standby 数据库默认以read only 打开。
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION; #开启新备库同步
SQL> select name,open_mode,database_role,protection_mode,SWITCHOVER_STATUS From v$database; #检查新主库状态和角色
6）同步检查
略...
备注：角色切换之前，可以发现原备库目录/u01/app/oracle/oradata/orcl下没有 redo log 和 standby redo log文件，切换之后，系统已经创建了这些日志文件。
以上是关于Oracle11G DG 搭建及管理的主要内容，如果未能解决你的问题，请参考以下文章