部署redis集群

Posted IT资料群1085043784

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了部署redis集群相关的知识，希望对你有一定的参考价值。

1 案例1：部署redis集群

1.1 问题

  • 具体要求如下：
  • 准备集群环境
  • 安装redis并创建集群
  • 查看集群信息

1.2 方案

搭建redis集群，拓扑规划如图-1所示：

技术图片

图－1

IP，端口规划如表-1所示：

表-1

技术图片

1.3 步骤

实现此案例需要按照如下步骤进行。

步骤一：准备集群环境

1）按照表-1配置主机名，ip地址，配置yum源（系统源）这里不再操作

2）把redis的软件包传到6台数据库服务器上面，安装redis服务器，六台服务器同样操作（以51为例）

  1. [[email protected] ~]# yum -y install gcc gcc-c++ make
  2. [[email protected] ~]# cd redis
  3. redis/ redis-cluster/
  4. [[email protected] ~]# cd redis/
  5. [[email protected] redis]# ls
  6. lnmp redis-4.0.8.tar.gz
  7. [[email protected] redis]# tar -xf redis-4.0.8.tar.gz
  8. [[email protected] redis]# cd redis-4.0.8/
  9. [[email protected] redis-4.0.8]# make && make install
  10. [[email protected] redis-4.0.8]# ./utils/install_server.sh
  11. Welcome to the redis service installer
  12. This script will help you easily set up a running redis server
  14. Please select the redis port for this instance: [6379]
  15. Selecting default: 6379
  16. Please select the redis config file name [/etc/redis/6379.conf]
  17. Selected default - /etc/redis/6379.conf
  18. Please select the redis log file name [/var/log/redis_6379.log]
  19. Selected default - /var/log/redis_6379.log
  20. Please select the data directory for this instance [/var/lib/redis/6379]
  21. Selected default - /var/lib/redis/6379
  22. Please select the redis executable path [/usr/local/bin/redis-server]
  23. Selected config:
  24. Port : 6379
  25. Config file : /etc/redis/6379.conf
  26. Log file : /var/log/redis_6379.log
  27. Data dir : /var/lib/redis/6379
  28. Executable : /usr/local/bin/redis-server
  29. Cli Executable : /usr/local/bin/redis-cli
  30. Is this ok? Then press ENTER to go on or Ctrl-C to abort.
  31. Copied /tmp/6379.conf => /etc/init.d/redis_6379
  32. Installing service...
  35. Successfully added to chkconfig!
  36. Successfully added to runlevels 345!
  37. Starting Redis server...
  38. Installation successful!            //安装成功
  40. [[email protected] redis-4.0.8]# ss -antlp | grep 6379            //查看时有端口
  41. LISTEN 0 128 127.0.0.1:6379 *:* users:(("redis-server",pid=10788,fd=6))

2）修改配置文件，6台redis服务器都要修改（以51为例子）

  1. [[email protected] redis-4.0.8]# /etc/init.d/redis_6379 stop        
  2. //停止已经开启的redis服务
  3. Stopping ...
  4. Waiting for Redis to shutdown ...
  5. Redis stopped
  8. [[email protected] redis-4.0.8]# vim /etc/redis/6379.conf
  9. ...
  10. bind 192.168.4.51        //修改ip
  11. port 6351        //不允许相同，只指定物理接口的ip
  12. daemonize yes         //以守护进程方式运行
  13. pidfile /var/run/redis_6351.pid
  14. cluster-enabled yes     //是否启用集群，前提是以守护进程方式运行
  15. cluster-config-file nodes-6351.conf        
  16. //存储集群信息的配置文件，自动生成，不允许相同
  17. cluster-node-timeout 5000        //集群节点通信超时时间
  18. ...
  19. [[email protected] redis-4.0.8]# /etc/init.d/redis_6379 start     //启动服务
  20. Starting Redis server...
  21. [[email protected] redis-4.0.8]# ss -antlp | grep 6351            //查看有端口
  22. LISTEN 0 128 192.168.4.51:6351 *:* users:(("redis-server",pid=11092,fd=6))
  23. LISTEN 0 128 192.168.4.51:16351 *:* users:(("redis-server",pid=11092,fd=8))        //16051：集群中的主机通信时用的端口
  24. [[email protected] redis-4.0.8]# ps -C redis
  25. PID TTY TIME CMD

注意：其他几台主机在修改时请注意ip，端口等的修改，不要和51主机的一样

3）关闭防火墙51-56主机（以51为例子）

  1. [[email protected] redis-4.0.8]# getenforce
  2. Permissive
  4. [[email protected] redis-4.0.8]# systemctl disable firewalld         
  5. //关闭防火墙不自启

4）查看集群信息

  1. [[email protected] redis-4.0.8]# redis-cli -h 192.168.4.51 -p 6351
  2. 192.168.4.51:6351> ping
  3. PONG
  4. 192.168.4.51:6351> cluster info
  5. cluster_state:fail
  6. cluster_slots_assigned:0
  7. cluster_slots_ok:0
  8. cluster_slots_pfail:0
  9. cluster_slots_fail:0
  10. cluster_known_nodes:1
  11. cluster_size:0
  12. ...
  14. 192.168.4.51:6351> cluster nodes
  15. f81f997d5ed988ec1587558e78d5f7dbc96abcbf :[email protected]16351 myself,master - 0 0 0 connected

步骤二：创建集群（在任意一台上执行创建集群的脚本都可以）这里在51上面执行

1）部署ruby脚本运行环境（在51上面执行）

  1. [[email protected] redis-4.0.8]# cd /root/redis-cluster/
  2. [[email protected] redis-cluster]# ls
  3. redis-3.2.1.gem ruby-devel-2.0.0.648-30.el7.x86_64.rpm
  4. [[email protected] redis-cluster]# yum -y install ruby rubygems
  6. [[email protected] redis-cluster]# rpm -ivh –nodeps
  7. ruby-devel-2.0.0.648-30.el7.x86_64.rpm
  8. warning: ruby-devel-2.0.0.648-30.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
  9. Preparing... ################################# [100%]
  10. Updating / installing...
  11. 1:ruby-devel-2.0.0.648-30.el7 ################################# [100%]
  12. [[email protected] redis-cluster]# which gem
  13. /usr/bin/gem
  14. [[email protected] redis-cluster]# gem install redis        
  15. Successfully installed redis-3.2.1
  16. Parsing documentation for redis-3.2.1
  17. Installing ri documentation for redis-3.2.1
  18. 1 gem installed

2）生成创建集群的脚本

  1. [[email protected] redis-cluster]# cd /root/redis/redis-4.0.8/src/
  2. [[email protected] src]# cp redis-trib.rb /usr/local/bin/
  3. [[email protected] src]# ll /usr/local/bin/redis-trib.rb
  4. -rwxr-xr-x. 1 root root 65991 Sep 27 16:12 /usr/local/bin/redis-trib.rb

3）创建集群

  1. [[email protected] src]# redis-trib.rb create --replicas 1
  2. 192.168.4.51:6351 192.168.4.52:6352
  3. 192.168.4.53:6353 192.168.4.54:6354
  4. 192.168.4.55:6355 192.168.4.56:6356
  5. //--replicas 1 给每一个主配置一个从库
  6. [[email protected] log]# redis-trib.rb create --replicas 1 192.168.4.51:6351 192.168.4.52:6352 192.168.4.53:6353 192.168.4.54:6354 192.168.4.55:6355 192.168.4.56:6356
  7. >>> Creating cluster
  8. >>> Performing hash slots allocation on 6 nodes...
  9. Using 3 masters:
  10. 192.168.4.51:6351
  11. 192.168.4.52:6352
  12. 192.168.4.53:6353
  13. Adding replica 192.168.4.55:6355 to 192.168.4.51:6351
  14. Adding replica 192.168.4.56:6356 to 192.168.4.52:6352
  15. Adding replica 192.168.4.54:6354 to 192.168.4.53:6353
  16. ...
  17. ...
  18. ...
  19. [OK] All nodes agree about slots configuration.
  20. >>> Check for open slots...
  21. >>> Check slots coverage...
  22. [OK] All 16384 slots covered.

4）查看集群信息，任意一台主机访问本机的redis服务查看即可

cluster info 查看集群信息

cluster nodes 查看集群节点信息

  1. [[email protected] log]# redis-cli -h 192.168.4.52 -p 6352
  2. 192.168.4.52:6352> CLUSTER INFO
  3. cluster_state:ok            //状态
  4. cluster_slots_assigned:16384
  5. cluster_slots_ok:16384
  6. cluster_slots_pfail:0
  7. cluster_slots_fail:0
  8. cluster_known_nodes:6
  9. cluster_size:3
  10. cluster_current_epoch:6
  11. cluster_my_epoch:2
  12. cluster_stats_messages_ping_sent:367
  13. cluster_stats_messages_pong_sent:327
  14. cluster_stats_messages_meet_sent:5
  15. cluster_stats_messages_sent:699
  16. cluster_stats_messages_ping_received:327
  17. cluster_stats_messages_pong_received:372
  18. cluster_stats_messages_received:699
  20. 192.168.4.52:6352> CLUSTER NODES        //查看集群节点信息
  21. 63afbb5e7d63b1f142358634578a3488e3c9e634 192.168.4.54:[email protected]16354 slave bc5c4e082a5a3391b634cf433a6486c867cfc44b 0 1538039278871 4 connected
  22. bc5c4e082a5a3391b634cf433a6486c867cfc44b 192.168.4.53:[email protected]16353 master - 0 1538039278571 3 connected 10923-16383
  23. 28e06c5f24a2b6c6412f81369e09bc9653cc51ff 192.168.4.56:[email protected]16356 slave 8568fbd73cb296cad6915d524e34761b2114af47 0 1538039278069 6 connected
  24. 7e8d9121f44d8331ff55b45c218b87df9bda1b70 192.168.4.55:[email protected]16355 slave a3083123bc5c87a76aab2655171634d4ee84f418 0 1538039278000 5 connected
  25. 8568fbd73cb296cad6915d524e34761b2114af47 192.168.4.52:[email protected]16352 myself,master - 0 1538039277000 2 connected 5461-10922
  26. a3083123bc5c87a76aab2655171634d4ee84f418 192.168.4.51:[email protected]16351 master - 0 1538039277869 1 connected 0-5460
  27. 192.168.4.52:6352>

5）测试集群

命令：

redis-cli -c -h ip地址 -p 端口

  1. [[email protected] log]# redis-cli -c -h 192.168.4.51 -p 6351
  2. 192.168.4.51:6351> set name jim
  3. -> Redirected to slot [5798] located at 192.168.4.52:6352
  4. OK
  5. 192.168.4.52:6352> get name
  6. "jim"
  7. 192.168.4.52:6352> set class linux
  8. OK
  9. 192.168.4.52:6352> get class
  10. "linux"
  11. 192.168.4.52:6352> set pay 26800
  12. -> Redirected to slot [4013] located at 192.168.4.51:6351
  13. OK
  14. 192.168.4.51:6351> get pay
  15. "26800"

集群不能用的情况：

有半数或者半数以上的主库机器挂掉，集群就不能用了

把一个从库升级成主，没有从库，集群不能用（前提是：有半数或者半数以上的主库机器挂掉）

一个主库挂掉，它的从库自动顶替为主库，正常使用（前提是：有半数或者半数以上的主库机器能用），挂掉的主库修复好后，会成为从库，不会抢占为主

6）集群节点选举策略（三主，三从）

停止某个主库的redis服务，对应的从库会自动升级为主库

先查看节点信息的主从情况

  1. [[email protected] log]# redis-cli -c -h 192.168.4.51 -p 6351
  2. 192.168.4.51:6351> CLUSTER nodes        
  3. ...
  4. 8568fbd73cb296cad6915d524e34761b2114af47 192.168.4.52:[email protected]16352 master - 0 1538040400840 2 connected 5461-10922
  5. 28e06c5f24a2b6c6412f81369e09bc9653cc51ff 192.168.4.56:[email protected]16356 slave 8568fbd73cb296cad6915d524e34761b2114af47 0 1538040400000 6 connected
  6. ...
  7. 192.168.4.51:6351>

看谁是谁的从库，如：

看节点前后的编号id是否有相同的

如：8568fbd73cb296cad6915d524e34761b2114af47

发现52的从库为56

停止主库52

  1. [[email protected] log]# redis-cli -h 192.168.4.52 -p 6352 shutdown
  2. [[email protected] log]# redis-cli -c -h 192.168.4.51 -p 6351
  3. 192.168.4.51:6351> CLUSTER NODES
  4. ...
  5. 8568fbd73cb296cad6915d524e34761b2114af47 192.168.4.52:[email protected]16352 master,fail - 1538041052349 1538041051000 2 disconnected        //52的主库坏掉
  6. 28e06c5f24a2b6c6412f81369e09bc9653cc51ff 192.168.4.56:[email protected]16356 master - 0 1538041066000 7 connected 5461-10922        //56成为主库
  7. ...

开启52，发现52成为从库

  1. [[email protected] redis-4.0.8]# /etc/init.d/redis_6352 start
  2. Starting Redis server...
  3. [[email protected] log]# redis-cli -c -h 192.168.4.51 -p 6351
  4. 192.168.4.51:6351> CLUSTER NODES
  5. 8568fbd73cb296cad6915d524e34761b2114af47 192.168.4.52:[email protected]16352 slave 28e06c5f24a2b6c6412f81369e09bc9653cc51ff 0 1538041254000 7 connected

2 案例2：管理redis集群

2.1 问题

  • 具体要求如下：
  • 练习添加主机
  • 练习删除主机

2.2 步骤

实现此案例需要按照如下步骤进行。

步骤一：添加主机

1）部署一台新redis服务器，ip为192.168.4.58，装包，初始化，启用集群配置，重启服务（这里之前已经操作过，不会的可以参考案例1）

2） 添加集群4.58（添加master节点）

格式：redis-trib.rb 选项 参数

选项： add-nade 添加主机（不指定角色为主）

由于之前是在51上面创建ruby脚本，所以只有51上面有redis-trib.rb命令，在51上面执行

  1. [[email protected] ~]# redis-trib.rb add-node 192.168.4.58:6358 192.168.4.51:6351
  2. >>> Adding node 192.168.4.58:6358 to cluster 192.168.4.51:6351
  3. >>> Performing Cluster Check (using node 192.168.4.51:6351)
  4. S: a3083123bc5c87a76aab2655171634d4ee84f418 192.168.4.51:6351
  5. slots: (0 slots) slave
  6. replicates 7e8d9121f44d8331ff55b45c218b87df9bda1b70
  7. M: 7e8d9121f44d8331ff55b45c218b87df9bda1b70 192.168.4.55:6355
  8. slots:0-5460 (5461 slots) master
  9. 1 additional replica(s)
  10. S: 8568fbd73cb296cad6915d524e34761b2114af47 192.168.4.52:6352
  11. slots: (0 slots) slave
  12. replicates 28e06c5f24a2b6c6412f81369e09bc9653cc51ff
  13. M: bc5c4e082a5a3391b634cf433a6486c867cfc44b 192.168.4.53:6353
  14. slots:10923-16383 (5461 slots) master
  15. 1 additional replica(s)
  16. S: 63afbb5e7d63b1f142358634578a3488e3c9e634 192.168.4.54:6354
  17. slots: (0 slots) slave
  18. replicates bc5c4e082a5a3391b634cf433a6486c867cfc44b
  19. M: 28e06c5f24a2b6c6412f81369e09bc9653cc51ff 192.168.4.56:6356
  20. slots:5461-10922 (5462 slots) master
  21. 1 additional replica(s)
  22. [OK] All nodes agree about slots configuration.
  23. >>> Check for open slots...
  24. >>> Check slots coverage...
  25. [OK] All 16384 slots covered.
  26. >>> Send CLUSTER MEET to node 192.168.4.58:6358 to make it join the cluster.
  27. [OK] New node added correctly.

3）检查集群主机的状态信息

选项：check 检查权限

  1. [[email protected] ~]# redis-trib.rb check 192.168.4.58:6358        //查看状态
  2. >>> Performing Cluster Check (using node 192.168.4.58:6358)
  3. M: c5e0da48f335c46a2ec199faa99b830f537dd8a0 192.168.4.58:6358
  4. slots: (0 slots) master        //发现没有hash槽
  5. 0 additional replica(s)
  6. M: 7e8d9121f44d8331ff55b45c218b87df9bda1b70 192.168.4.55:6355
  7. slots:0-5460 (5461 slots) master
  8. 1 additional replica(s)
  9. ...
  10. S: a3083123bc5c87a76aab2655171634d4ee84f418 192.168.4.51:6351
  11. slots: (0 slots) slave
  12. replicates 7e8d9121f44d8331ff55b45c218b87df9bda1b70
  13. [OK] All nodes agree about slots configuration.
  14. >>> Check for open slots...
  15. >>> Check slots coverage...
  16. [OK] All 16384 slots covered.

4）手动对集群进行分片迁移

选项：reshard 重新分配hash槽

  1. [[email protected] ~]# redis-trib.rb reshard 192.168.4.58:6358
  2. How many slots do you want to move (from 1 to 16384)?4096
  3. //拿出多少个hash 槽给主机192.168.4.58
  4. What is the receiving node ID? c5e0da48f335c46a2ec199faa99b830f537dd8a0
  5. //主机192.168.4.58的id值
  6. Source node #1:all //从当前所有的主里面获取hash槽
  7. Do you want to proceed with the proposed reshard plan (yes/no)?yes
  8. ...
  9. Moving slot 12283 from 192.168.4.53:6353 to 192.168.4.58:6358:
  10. Moving slot 12284 from 192.168.4.53:6353 to 192.168.4.58:6358:
  11. Moving slot 12285 from 192.168.4.53:6353 to 192.168.4.58:6358:
  12. Moving slot 12286 from 192.168.4.53:6353 to 192.168.4.58:6358:
  13. Moving slot 12287 from 192.168.4.53:6353 to 192.168.4.58:6358:

再次查看发现4.58有4096个hash slot

  1. [[email protected] ~]# redis-trib.rb check 192.168.4.58:6358
  2. >>> Performing Cluster Check (using node 192.168.4.58:6358)
  3. M: c5e0da48f335c46a2ec199faa99b830f537dd8a0 192.168.4.58:6358
  4. slots:0-1364,5461-6826,10923-12287 (4096 slots) master
  5. 0 additional replica(s)

5）删除master角色的主机

先删除主机占用的hash槽

  1. [[email protected] ~]# redis-trib.rb reshard 192.168.4.58:6358
  2. How many slots do you want to move (from 1 to 16384)?4096     
  3. //移除hash 槽的个数
  4. What is the receiving node ID? bc5c4e082a5a3391b634cf433a6486c867cfc44b
  5.     //要移动给谁的id即目标主机（这里可以随机写一个master的ID）
  6. Source node #1: c5e0da48f335c46a2ec199faa99b830f537dd8a0
  7. //从谁那移动即源主机（这里写4.58的ID）
  8. Source node #2:done         //设置完毕
  9. ...
  10. Moving slot 12282 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  11. Moving slot 12283 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  12. Moving slot 12284 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  13. Moving slot 12285 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  14. Moving slot 12286 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  15. Moving slot 12287 from c5e0da48f335c46a2ec199faa99b830f537dd8a0
  16. Do you want to proceed with the proposed reshard plan (yes/no)?yes        //提交
  17. ...
  18. Moving slot 12282 from 192.168.4.58:6358 to 192.168.4.53:6353:
  19. Moving slot 12283 from 192.168.4.58:6358 to 192.168.4.53:6353:
  20. Moving slot 12284 from 192.168.4.58:6358 to 192.168.4.53:6353:
  21. Moving slot 12285 from 192.168.4.58:6358 to 192.168.4.53:6353:
  22. Moving slot 12286 from 192.168.4.58:6358 to 192.168.4.53:6353:
  23. Moving slot 12287 from 192.168.4.58:6358 to 192.168.4.53:6353:

删除集群主机4.58(删除之后redis服务自动关闭)

  1. [[email protected] ~]# redis-trib.rb del-node 192.168.4.58:6358
  2. c5e0da48f335c46a2ec199faa99b830f537dd8a0    //删除谁+删除的id
  3. >>> Removing node c5e0da48f335c46a2ec199faa99b830f537dd8a0 from cluster 192.168.4.58:6358
  4. >>> Sending CLUSTER FORGET messages to the cluster...
  5. >>> SHUTDOWN the node.

6）添加从节点主机，随机添加

  1. [[email protected] ~]# redis-trib.rb add-node --slave
  2. 192.168.4.57:6357 192.168.4.51:6351
  3. >>> Adding node 192.168.4.57:6357 to cluster 192.168.4.51:6351
  4. >>> Performing Cluster Check (using node 192.168.4.51:6351)
  5. ……
  6. ……
  7. [OK] All 16384 slots covered.
  8. Automatically selected master 192.168.4.51:6351
  9. >>> Send CLUSTER MEET to node 192.168.4.57:6357 to make it join the cluster.
  10. Waiting for the cluster to join.
  11. >>> Configure node as replica of 192.168.4.51:6351.
  12. [OK] New node added correctly.

7）移除从节点，从节点主机没有槽位范围，直接移除即可

命令格式：

redis-trib.rb del-node 192.168.4.57:6357 主机id值

  1. [[email protected] ~]# redis-trib.rb del-node 192.168.4.57:6357
  2. f6649ea99b2f01faca26217691222c17a3854381
  3. >>> Removing node f6649ea99b2f01faca26217691222c17a3854381
  4. from cluster 192.168.4.57:6351
  5. >>> Sending CLUSTER FORGET messages to the cluster...
  6. >>> SHUTDOWN the node.

以上是关于部署redis集群的主要内容，如果未能解决你的问题，请参考以下文章

在Kubernetes上部署Redis集群

docker部署redis集群（实战）

Redis3.0.7集群部署完整版

redis5.0部署集群环境

部署redis集群

Redis主从加哨兵模式集群部署