[转帖]MySQL+keepalived用keepalived实现MySQL主主模式的高可用
Posted jinanxiaolaohu
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了[转帖]MySQL+keepalived用keepalived实现MySQL主主模式的高可用相关的知识，希望对你有一定的参考价值。
【mysql+keepalived】用keepalived实现MySQL主主模式的高可用
https://www.jianshu.com/p/8694d07595bc
一、实验说明
MySQL主主模式，是两台MySQL数据库互为主从。
此实验是用keepalived实现MySQL主主模式的高可用，基于已经安装好了主主架构的MySQL，然后配置keepalived，验证高可用性！
二、实验环境
操作系统：CentOS 7.5
serverA:192.168.1.104
serverB: 192.168.1.105
VIP: 192.168.1.110
三、关闭selinux
# setenforce 0
# sed -i ‘s/^SELINUX=.*/SELINUX=permissive/g‘ /etc/selinux/config
四、防火墙设置
firewalld和iptables二选一
五、软件安装
在serverA和serverB
# yum -y install epel-release
# yum -y install keepalived
六、在serverA配置keepalived
# vim /etc/keepalived/keepalived.conf
###########################################
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 150
priority 100
advert_int 1
nopreempt
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.1.110/24
}
}
virtual_server 192.168.1.110 3306 {
delay_loop 2
lb_algo rr
lb_kind DR
persistence_timeout 50
protocol TCP
real_server 192.168.1.104 3306 {
weight 3
notify_down /etc/keepalived/restartKeepalived.sh
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
###################################################
# vim /etc/keepalived/restartKeepalived.sh
#################################
#!/bin/bash
systemctl restart keepalived
##################################
# chmod 700 /etc/keepalived/restartKeepalived.sh
七、在serverB配置keepalived
在serveB
# vim /etc/keepalived/keepalived.conf
###########################################
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 150
priority 90
advert_int 1
nopreempt
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.1.110/24
}
}
virtual_server 192.168.1.110 3306 {
delay_loop 2
lb_algo rr
lb_kind DR
persistence_timeout 50
protocol TCP
real_server 192.168.1.105 3306 {
weight 3
notify_down /etc/keepalived/restartKeepalived.sh
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
###################################################
# vim /etc/keepalived/restartKeepalived.sh
#################################
#!/bin/bash
systemctl restart keepalived
##################################
# chmod 700 /etc/keepalived/restartKeepalived.sh
八、验证MySQL的高可用性
在serverA
# ip addr list
# systemctl stop mysqld
在serverB
# ip addr list
从上可以看出，关闭serverA上的MySQL，vip成功漂移到了severB，数据库的连接不受影响，实现了一定程度的高可用。
两个注意点：
1. 具体通过vip连接到serverA或者severB 时，服务器上的vip才监听3306端口，无连接时，不监听
2. vip在serverA时，在severB上无法通过vip连接上数据库，反之亦然
九、参考
keepalived + mysql 实现单向备份、故障转移
https://www.jianshu.com/p/35030921dab5
Centos7+Keepalived实现Mariadb(MYSQL)的高可用(HA)
http://blog.51cto.com/gaowenlong/1888036
以上是关于[转帖]MySQL+keepalived用keepalived实现MySQL主主模式的高可用的主要内容，如果未能解决你的问题，请参考以下文章