mysql报错:You must at least set –server-id to enable either a master or a slave
Posted
tags:
篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了mysql报错:You must at least set –server-id to enable either a master or a slave相关的知识,希望对你有一定的参考价值。
【场景】mysql版本:Percona-Server 5.6.23,相关主要参数:
server_id = 3306 sync_binlog=1 gtid_mod = on enforce-gtid-consistency = 1 log-slave-updates = 1 relay-log-purge = 1 relay_log_recovery = 1 master_info_repository = "TABLE" relay_log_info_repository = "TABLE"
打算部署一个新的slave实例用于测试,图方便从master上直接把mysql这个系统库整个目录拷贝到slave上,进行初始化后,执行 CHANGE MASTER 配置主从复制,但却提示错误信息:
mysql> change master to master_host=’10.x.x.x’,master_port=3306,master_user=’repl’,master_password=’xx’,master_auto_position=1; ERROR 1794 (HY000): Slave is not configured or failed to initialize properly. You must at least set –server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log.
看到这个错误信息,最直觉的反应是 server_id 设置错误了,比如和 master 的ID重复了。经过检查,确认不是这个原因,尝试检查了其他参数,也提示同样的错误。另外奇怪的是,上面的错误信息,未被记录到错误日志中。
【分析】应该注意到一点,上面提到初始化slave实例时,是从master上直接拷贝mysql系统库整个目录的,但并没有同时也拷贝 ibdata1、ib_logfile* 等InnoDB相关文件。其实问题就在这里,因为mysql系统库中,下面这几个表是采用InnoDB引擎的,所以初始化后,无法正常读写:
innodb_index_stats innodb_table_stats slave_master_info slave_relay_log_info slave_worker_info
经验证,通过客户端访问mysql库时,就会提示下面的错误信息了:
2015-05-04 17:21:25 14407 [Warning] InnoDB: Cannot open table mysql/innodb_index_stats from the internal data dictionary of InnoDB though the .frm file for the table exists. See http://dev.mysql.com/doc/refman/5.6/en/innodb-troubleshooting.html for how you can resolve the problem. 2015-05-04 17:21:25 14407 [Warning] InnoDB: Cannot open table mysql/innodb_table_stats from the internal data dictionary of InnoDB though the .frm file for the table exists. See http://dev.mysql.com/doc/refman/5.6/en/innodb-troubleshooting.html for how you can resolve the problem. 2015-05-04 17:21:25 14407 [Warning] InnoDB: Cannot open table mysql/slave_master_info from the internal data dictionary of InnoDB though the .frm file for the table exists. See http://dev.mysql.com/doc/refman/5.6/en/innodb-troubleshooting.html for how you can resolve the problem. 2015-05-04 17:21:25 14407 [Warning] InnoDB: Cannot open table mysql/slave_relay_log_info from the internal data dictionary of InnoDB though the .frm file for the table exists. See http://dev.mysql.com/doc/refman/5.6/en/innodb-troubleshooting.html for how you can resolve the problem. 2015-05-04 17:21:25 14407 [Warning] InnoDB: Cannot open table mysql/slave_worker_info from the internal data dictionary of InnoDB though the .frm file for the table exists. See http://dev.mysql.com/doc/refman/5.6/en/innodb-troubleshooting.html for how you can resolve the problem.
【解决】本次案例中造成上述问题的原因是没有按照标准流程进行初始化,或者没有把master上的全部相关文件都拷贝到slave上去,导致mysql库下的几个InnoDB表无法使用。
解决的方法有两个:
1、删解除mysql系统库目录下上述几个表对应的ibd文件,执行 mysql_install_db 重新初始化;
2、从master将整个数据库全部文件都拷贝到slave上,并确认InnoDB的共享表空间文件及REDO LOG大小配置和master上是一致的;
本文出自 “11726068” 博客,谢绝转载!
以上是关于mysql报错:You must at least set –server-id to enable either a master or a slave的主要内容,如果未能解决你的问题,请参考以下文章
python执行ffmpeg 报错:at least one output file must be specified
编译mcrypt时,报错:You need at least libmhash 0.8.15
you need (at least one of) the RELOAD privilege(s) for this operation
使用Mysql Workbench 导入数据库提示 ERROR 1227 (42000) at line 18: Access denied; you need (at least one of) t
解决MySQL8 #1227 – Access denied; you need (at least one of) the SYSTEM_USER privilege(s) for this ...