mysql 8.0.18 手工安装记录

Posted davie_2020

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了mysql 8.0.18 手工安装记录相关的知识,希望对你有一定的参考价值。

mysql 8.0.18 手工安装记录

  为了日常方便,特记录如下。

一、安装系统依赖包

#1、系统依赖包安装
yum -y install make gcc-c++ cmake bison-devel ncurses-devel  readline-devel  libaio-devel perl libaio wget lrzsz vim libnuma* bzip2 xz

二、关闭防火墙和selinux

#2、关闭selinux
sed -i s/SELINUX=enforcing/SELINUX=disabled/ /etc/selinux/config
setenforce  0
#3、修改系统限制参数
cat >> /etc/security/limits.conf << EOF
#
###custom
#
*           soft   nofile       20480
*           hard   nofile       65535
*           soft   nproc        20480
*           hard   nproc        65535
EOF

三、修改系统限制参数

修改系统限制参数
cat >>/etc/sysctl.conf <<"EOF"

##################################
vm.swappiness=0
#增加tcp支持的队列数
net.ipv4.tcp_max_syn_backlog = 65535
#减少断开连接时 ,资源回收
net.ipv4.tcp_max_tw_buckets = 8000
net.ipv4.tcp_tw_reuse = 1
#net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 10
#改变本地的端口范围
net.ipv4.ip_local_port_range = 1024 65535
#允许更多的连接进入队列
net.ipv4.tcp_max_syn_backlog = 4096  
#对于只在本地使用的数据库服务器
net.ipv4.tcp_fin_timeout = 30
#端口监听队列
net.core.somaxconn=65535
#接受数据的速率
net.core.netdev_max_backlog=65535
net.core.wmem_default=87380
net.core.wmem_max=16777216
net.core.rmem_default=87380
net.core.rmem_max=16777216
EOF

sysctl -p

四、修改系统参数限制

# 修改系统限制参数
cat >>/etc/sysctl.conf <<"EOF"

##################################
vm.swappiness=0
#增加tcp支持的队列数
net.ipv4.tcp_max_syn_backlog = 65535
#减少断开连接时 ,资源回收
net.ipv4.tcp_max_tw_buckets = 8000
net.ipv4.tcp_tw_reuse = 1
#net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 10
#改变本地的端口范围
net.ipv4.ip_local_port_range = 1024 65535
#允许更多的连接进入队列
net.ipv4.tcp_max_syn_backlog = 4096  
#对于只在本地使用的数据库服务器
net.ipv4.tcp_fin_timeout = 30
#端口监听队列
net.core.somaxconn=65535
#接受数据的速率
net.core.netdev_max_backlog=65535
net.core.wmem_default=87380
net.core.wmem_max=16777216
net.core.rmem_default=87380
net.core.rmem_max=16777216
EOF

sysctl -p

五、下载安装包

# 下载安装包:社区版 8.0.18
cd /opt/
wget https://dev.mysql.com/get/Downloads/MySQL-8.0/mysql-8.0.18-linux-glibc2.12-x86_64.tar.xz

六、解压安装包

# 解压安装包
tar -xJf mysql-8.0.18-linux-glibc2.12-x86_64.tar.xz
cd /usr/local/
ln -s /opt/mysql-8.0.18-linux-glibc2.12-x86_64 mysql

七、创建用户

#7、创建用户
groupadd mysql
useradd -g mysql mysql -d /home/mysql -s /sbin/nologin

八、创建对应的目录

#创建对应的目录
mkdir -p /data/mysql/mysql_3306/{data,logs,tmp,undolog}

九、创建配置文件

技术图片
#9、创建my.cnf配置文件
# 排除干扰因素
if [ -f /etc/my.cnf ]; then
    mv /etc/my.cnf /etc/my.cnf.`date +%Y%m%d%H%M`.bak
fi 

cat >/data/mysql/mysql_3306/my_3306.cnf <<"EOF"
[client]
port    = 3306
#tee     = "/data/mysql/mysql_3306/logs/mysql_output.log" 
socket  = /data/mysql/mysql_3306/tmp/mysql_3306.sock

[mysql]
prompt="u@h R:m:s [d]> "
no-auto-rehash

[mysqld]
user    = mysql
port    = 3306
admin_address = 127.0.0.1
basedir    = /usr/local/mysql
datadir    = /data/mysql/mysql_3306/data
socket    = /data/mysql/mysql_3306/tmp/mysql_3306.sock
pid-file = mysql_3306.pid
character-set-server = utf8mb4
skip_name_resolve = 1

#replicate-wild-ignore-table=mysql.%
#replicate-wild-ignore-table=test.%
#replicate-wild-ignore-table=information_schema.%

# Two-Master configure
#server-1 
#auto-increment-offset = 1
#auto-increment-increment = 2 

#server-2                          
#auto-increment-offset = 2
#auto-increment-increment = 2

# semi sync replication settings #
#plugin_dir = /usr/local/mysql/lib/mysql/plugin
#plugin_load = "validate_password.so;rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so"
plugin_dir = /usr/local/mysql/lib/plugin #官方版本的路径
plugin_load = "rpl_semi_sync_master=semisync_master.so;rpl_semi_sync_slave=semisync_slave.so" #官方版本的路径

slave_parallel_workers = 8
slave_parallel_type = LOGICAL_CLOCK

open_files_limit    = 65535
back_log = 1024
max_connections = 1024
max_connect_errors = 1000000
table_open_cache = 1024
table_definition_cache = 1024
table_open_cache_instances = 64
thread_stack = 512K
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 4M
join_buffer_size = 4M
thread_cache_size = 1536
interactive_timeout = 600
wait_timeout = 600
tmp_table_size = 32M
max_heap_table_size = 32M
slow_query_log = 1
log_timestamps = SYSTEM
slow_query_log_file = /data/mysql/mysql_3306/logs/slow.log
log-error = /data/mysql/mysql_3306/logs/error.log
long_query_time = 0.1
log_queries_not_using_indexes =1
log_throttle_queries_not_using_indexes = 60
min_examined_row_limit = 100
log_slow_admin_statements = 1
log_slow_slave_statements = 1
server-id = 3306
log-bin = /data/mysql/mysql_3306/logs/mysql-bin
sync_binlog = 1
binlog_cache_size = 4M
max_binlog_cache_size = 2G
max_binlog_size = 1G
# binlog_expire_logs_seconds=2592000 
master_info_repository = TABLE
relay_log_info_repository = TABLE
gtid_mode = on
enforce_gtid_consistency = 1
log_slave_updates
#slave-rows-search-algorithms = INDEX_SCAN,HASH_SCAN
binlog_format = row
binlog_row_image=FULL
binlog_checksum = 1
relay_log_recovery = 1
relay-log-purge = 1
key_buffer_size = 32M
read_buffer_size = 8M
read_rnd_buffer_size = 8M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
lock_wait_timeout = 3600
explicit_defaults_for_timestamp = 1
innodb_thread_concurrency = 0
innodb_sync_spin_loops = 100
innodb_spin_wait_delay = 30

#transaction_isolation = REPEATABLE-READ
transaction_isolation = READ-COMMITTED
#innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 45875M
innodb_buffer_pool_instances = 4
innodb_buffer_pool_load_at_startup = 1
innodb_buffer_pool_dump_at_shutdown = 1
innodb_data_file_path = ibdata1:1G:autoextend
innodb_flush_log_at_trx_commit = 1
innodb_log_buffer_size = 32M
innodb_log_file_size = 2G
innodb_log_files_in_group = 3
innodb_max_undo_log_size = 4G
innodb_undo_directory = /data/mysql/mysql_3306/undolog

# 根据您的服务器IOPS能力适当调整
# 一般配普通SSD盘的话,可以调整到 10000 - 20000
# 配置高端PCIe SSD卡的话,则可以调整的更高,比如 50000 - 80000
innodb_io_capacity = 4000
innodb_io_capacity_max = 8000
innodb_flush_sync = 0
innodb_flush_neighbors = 0
innodb_write_io_threads = 8
innodb_read_io_threads = 8
innodb_purge_threads = 4
innodb_page_cleaners = 4
innodb_open_files = 65535
innodb_max_dirty_pages_pct = 50
innodb_flush_method = O_DIRECT
innodb_lru_scan_depth = 4000
innodb_checksum_algorithm = crc32
innodb_lock_wait_timeout = 10
innodb_rollback_on_timeout = 1
innodb_print_all_deadlocks = 1
innodb_file_per_table = 1
innodb_online_alter_log_max_size = 4G
innodb_stats_on_metadata = 0

# some var for MySQL 8
log_error_verbosity = 3
innodb_print_ddl_logs = 1
binlog_expire_logs_seconds = 2592000
#innodb_dedicated_server = 0

innodb_status_file = 1
# 注意: 开启 innodb_status_output & innodb_status_output_locks 后, 可能会导致log-error文件增长较快
innodb_status_output = 0
innodb_status_output_locks = 0


#performance_schema
performance_schema = 1
performance_schema_instrument = %memory%=on
performance_schema_instrument = %lock%=on


#innodb monitor
innodb_monitor_enable="module_innodb"
innodb_monitor_enable="module_server"
innodb_monitor_enable="module_dml"
innodb_monitor_enable="module_ddl"
innodb_monitor_enable="module_trx"
innodb_monitor_enable="module_os"
innodb_monitor_enable="module_purge"
innodb_monitor_enable="module_log"
innodb_monitor_enable="module_lock"
innodb_monitor_enable="module_buffer"
innodb_monitor_enable="module_index"
innodb_monitor_enable="module_ibuf_system"
innodb_monitor_enable="module_buffer_page"
innodb_monitor_enable="module_adaptive_hash"

[mysqldump]
quick
max_allowed_packet = 64M

[mysqld_safe]
#malloc-lib=/usr/local/mysql/lib/jmalloc.so 
nice=-19
open-files-limit=65535

EOF
View Code

十、修改目录权限

# 修改目录权限
chown -R mysql.mysql /data/mysql/mysql_3306
chown -R mysql.mysql /usr/local/mysql/

十一、初始化数据库

#11、初始化数据库
/usr/local/mysql/bin/mysqld --defaults-file=/data/mysql/mysql_3306/my_3306.cnf --initialize-insecure  --user=mysql

十二、查看日志

#12、查看日志
tail -f /data/mysql/mysql_3306/logs/error.log 

十三、初次修改密码

#13、初次修改密码方法
/usr/local/mysql/bin/mysql --socket=/data/mysql/mysql_3306/tmp/mysql_3306.sock # 初次登陆, 密码为空
ALTER USER root@localhost IDENTIFIED WITH mysql_native_password BY GJjumB6g4FcwdF3R6AZc PASSWORD EXPIRE NEVER ; create user root@127.0.0.1 identified WITH mysql_native_password by GJjumB6g4FcwdF3R6AZc PASSWORD EXPIRE NEVER ; grant all privileges on *.* to root@127.0.0.1 with grant option; create user admin_m@127.0.0.1 identified WITH mysql_native_password by fcfmTbRw1tz2x5L5GvjJ PASSWORD EXPIRE NEVER ; grant all privileges on *.* to admin_m@127.0.0.1 with grant option; create user admin_m@% identified WITH mysql_native_password by fcfmTbRw1tz2x5L5GvjJ PASSWORD EXPIRE NEVER ; grant all privileges on *.* to admin_m@% with grant option; create user test_w@% identified with mysql_native_password by EeCrfUDO6wRzn72BBQ52 PASSWORD EXPIRE NEVER ; grant insert,delete,update,select on db144.* to test_w@% ; create user test_r@% identified with mysql_native_password by EeCrfUDO6wRzn72BBQ52 PASSWORD EXPIRE NEVER ; grant insert,delete,update,select on db144.* to test_r@% ; create user repl@% IDENTIFIED with mysql_native_password by replpfhOTnWffQdQL3F3 ; GRANT REPLICATION SLAVE ON *.* TO repl@% ;

十四、快捷方式

#14、快捷连接方式
ln -s /usr/local/mysql/lib/libmysqlclient.so /usr/lib/
ln -s /usr/local/mysql/lib/libmysqlclient.so.21 /usr/lib/libmysqlclient.so.21
ln -s /usr/local/mysql/lib/libmysqlclient.so /usr/lib64/
ln -s /usr/local/mysql/lib/libmysqlclient.so.21 /usr/lib64/libmysqlclient.so.21


ln -s /data/mysql/mysql_3306/tmp/mysql_3306.sock /tmp/mysql.sock
ln -s /usr/local/mysql/bin/* /usr/bin/

cat >>~/.bashrc <<"EOF"
##########


alias mysql.3306.start="/usr/local/mysql/bin/mysqld_safe --defaults-file=/data/mysql/mysql_3306/my_3306.cnf &"
alias mysql.3306.stop="/usr/local/mysql/bin/mysqladmin -h127.0.0.1 -P 3306 -uroot -p‘GJjumB6g4FcwdF3R6AZc‘ shutdown &"
alias mysql.3306.login="/usr/local/mysql/bin/mysql -h127.0.0.1 -P 3306 -uroot -p‘GJjumB6g4FcwdF3R6AZc‘"


##########
EOF


source  /root/.bash_profile

cat >>/etc/ld.so.conf <<"EOF"
/usr/local/mysql/lib
EOF

ldconfig 
mysql.3306.login

十五、搭建主从参考操作

yum -y install perl-DBI
yum -y install perl-DBD-MySQL 
yum -y install perl-IO-Socket-SSL.noarch
yum -y install perl-Time-HiRes  
yum -y install perl-TermReadKey
yum -y install perl-ExtUtils-MakeMaker
yum -y install perl-Digest-MD5
yum -y install cmake gcc gcc-c++ libaio libaio-devel automake autoconf bzr

cd /opt/
wget https://www.percona.com/downloads/Percona-XtraBackup-LATEST/Percona-XtraBackup-8.0-7/binary/tarball/percona-xtrabackup-8.0.7-Linux-x86_64.libgcrypt145.tar.gz
tar -zxf percona-xtrabackup-8.0.7-Linux-x86_64.libgcrypt145.tar.gz 
cd /usr/local/
ln -s /opt/percona-xtrabackup-8.0.7-Linux-x86_64 xtrabackup
ln -fs  /opt/percona-xtrabackup-8.0.7-Linux-x86_64/bin/* /usr/bin/ 
xtrabackup -v


create user ‘bk_user‘@‘%‘ identified WITH mysql_native_password by ‘v9SimLKsIHpwzyOgVwlM‘ PASSWORD EXPIRE NEVER ; 
GRANT BACKUP_ADMIN,SELECT, RELOAD, PROCESS, SUPER, LOCK TABLES, REPLICATION SLAVE, REPLICATION CLIENT, SHOW VIEW ON *.* TO ‘bk_user‘@‘%‘;


# 在从库上执行
rm -rf /data/mysql/mysql_3306/undolog/* /data/mysql/mysql_3306/data/* /data/mysql/mysql_3306/logs/mysql-bin*
xtrabackup --defaults-file=/data/mysql/mysql_3306/my_3306.cnf  --use-memory=4G --decompress --parallel=8 --remove-original --target-dir=/data/m/20191029_155959
xtrabackup --defaults-file=/data/mysql/mysql_3306/my_3306.cnf --copy-back --use-memory=4G --parallel=8 --target-dir=/data/m/20191029_155959
chown -R mysql.mysql /data/mysql/mysql_3306/
# 启动数据库即可
# 修改server_id

[root@bj-db-m2 data]# cat xtrabackup_info 
uuid = 3d67d0cd-fa22-11e9-aa77-525400f4342d
name = 
tool_name = xtrabackup
tool_command = --defaults-file=/data/mysql/mysql_3306/my_3306.cnf --host=10.10.146.28 --user=bk_user --password=... --port=3306 --backup --compress --compress-threads=8 --use-memory=4G --slave-info --parallel=8 --target-dir=/data/bak/data/20191029_155959
tool_version = 8.0.7
ibbackup_version = 8.0.7
server_version = 8.0.18
start_time = 2019-10-29 16:00:00
end_time = 2019-10-29 16:00:57
lock_time = 0
binlog_pos = filename ‘mysql-bin.000018‘, position ‘195‘, GTID of the last change ‘18026056-f574-11e9-9d03-525400f4342d:1-19494‘
innodb_from_lsn = 0
innodb_to_lsn = 24342657453
partial = N
incremental = N
format = file
compressed = compressed
encrypted = N

reset master;
reset slave all; SET @MYSQLDUMP_TEMP_LOG_BIN = @@SESSION.SQL_LOG_BIN; SET @@SESSION.SQL_LOG_BIN= 0; SET @@GLOBAL.GTID_PURGED=‘18026056-f574-11e9-9d03-525400f4342d:1-19494‘; SET @@SESSION.SQL_LOG_BIN = @MYSQLDUMP_TEMP_LOG_BIN; # 或者 SET @@GLOBAL.GTID_PURGED=‘18026056-f574-11e9-9d03-525400f4342d:1-19494‘; change master to master_host=‘10.10.146.28‘, master_port=3306, master_user=‘repl‘, master_password=‘replpfhOTnWffQdQL3F3‘, master_auto_position = 1; start slave; show slave statusG; [root@bj-db-manage ~]#

 

以上是关于mysql 8.0.18 手工安装记录的主要内容,如果未能解决你的问题,请参考以下文章

centos 7 安装 mysql 8.0.18

mysql 8.0.18 小白安装教程

MySQL--下载与安装(解压版)--version 8.0.18

MySQL 8.0.18安装教程(windows 64位)

MySQL 8.0.18 在 Windows Server 2019 上的安装(ZIP)公开

MySQL数据库初体验(含MySQL数据库5.7.17手工编译安装)