Mysql（代码记忆）

Posted 2020-11-05 似水年华梦

1.视图

#修改视图，原始表也跟着改
mysql> select * from course;
+-----+--------+------------+
| cid | cname  | teacher_id |
+-----+--------+------------+
|   1 | 生物   |          1 |
|   2 | 物理   |          2 |
|   3 | 体育   |          3 |
|   4 | 美术   |          2 |
+-----+--------+------------+
rows in set (0.00 sec)

mysql> create view course_view as select * from course; #创建表course的视图
Query OK, 0 rows affected (0.52 sec)

mysql> select * from course_view;
+-----+--------+------------+
| cid | cname  | teacher_id |
+-----+--------+------------+
|   1 | 生物   |          1 |
|   2 | 物理   |          2 |
|   3 | 体育   |          3 |
|   4 | 美术   |          2 |
+-----+--------+------------+
rows in set (0.00 sec)
 
mysql> update course_view set cname=‘xxx‘; #更新视图中的数据
Query OK, 4 rows affected (0.04 sec)
Rows matched: 4  Changed: 4  Warnings: 0

mysql> insert into course_view values(5,‘yyy‘,2); #往视图中插入数据
Query OK, 1 row affected (0.03 sec)

mysql> select * from course; #发现原始表的记录也跟着修改了
+-----+-------+------------+
| cid | cname | teacher_id |
+-----+-------+------------+
|   1 | xxx   |          1 |
|   2 | xxx   |          2 |
|   3 | xxx   |          3 |
|   4 | xxx   |          2 |
|   5 | yyy   |          2 |
+-----+-------+------------+
rows in set (0.00 sec)

2.触发器

#准备表
CREATE TABLE cmd (
    id INT PRIMARY KEY auto_increment,
    USER CHAR (32),
    priv CHAR (10),
    cmd CHAR (64),
    sub_time datetime, #提交时间
    success enum (‘yes‘, ‘no‘) #0代表执行失败
);

CREATE TABLE errlog (
    id INT PRIMARY KEY auto_increment,
    err_cmd CHAR (64),
    err_time datetime
);

#创建触发器
delimiter //
CREATE TRIGGER tri_after_insert_cmd AFTER INSERT ON cmd FOR EACH ROW
BEGIN
    IF NEW.success = ‘no‘ THEN #等值判断只有一个等号
            INSERT INTO errlog(err_cmd, err_time) VALUES(NEW.cmd, NEW.sub_time) ; #必须加分号
      END IF ; #必须加分号
END//
delimiter ;


#往表cmd中插入记录，触发触发器，根据IF的条件决定是否插入错误日志
INSERT INTO cmd (
    USER,
    priv,
    cmd,
    sub_time,
    success
)
VALUES
    (‘egon‘,‘0755‘,‘ls -l /etc‘,NOW(),‘yes‘),
    (‘egon‘,‘0755‘,‘cat /etc/passwd‘,NOW(),‘no‘),
    (‘egon‘,‘0755‘,‘useradd xxx‘,NOW(),‘no‘),
    (‘egon‘,‘0755‘,‘ps aux‘,NOW(),‘yes‘);


#查询错误日志，发现有两条
mysql> select * from errlog;
+----+-----------------+---------------------+
| id | err_cmd         | err_time            |
+----+-----------------+---------------------+
|  1 | cat /etc/passwd | 2017-09-14 22:18:48 |
|  2 | useradd xxx     | 2017-09-14 22:18:48 |
+----+-----------------+---------------------+
rows in set (0.00 sec)

3.事务

 

create table user(
id int primary key auto_increment,
name char(32),
balance int
);

insert into user(name,balance)
values
(‘wsb‘,1000),
(‘egon‘,1000),
(‘ysb‘,1000);

#原子操作
start transaction;
update user set balance=900 where name=‘wsb‘; #买支付100元
update user set balance=1010 where name=‘egon‘; #中介拿走10元
update user set balance=1090 where name=‘ysb‘; #卖家拿到90元
commit;

#出现异常，回滚到初始状态
start transaction;
update user set balance=900 where name=‘wsb‘; #买支付100元
update user set balance=1010 where name=‘egon‘; #中介拿走10元
uppdate user set balance=1090 where name=‘ysb‘; #卖家拿到90元,出现异常没有拿到
rollback;
commit;
mysql> select * from user;
+----+------+---------+
| id | name | balance |
+----+------+---------+
|  1 | wsb  |    1000 |
|  2 | egon |    1000 |
|  3 | ysb  |    1000 |
+----+------+---------+
rows in set (0.00 sec)

 

4.存储过程

#方式一：
    MySQL：存储过程
    程序：调用存储过程

#方式二：
    MySQL：
    程序：纯SQL语句

#方式三：
    MySQL:
    程序：类和对象，即ORM（本质还是纯SQL语句）

#in          仅用于传入参数用
#out        仅用于返回值用
#inout     既可以传入又可以当作返回值

delimiter //
create procedure p2(
    in n1 int,
    in n2 int
)
BEGIN
    
    select * from blog where id > n1;
END //
delimiter ;

#在mysql中调用
call p2(3,2)

#在python中基于pymysql调用
cursor.callproc(‘p2‘,(3,2))
print(cursor.fetchall())

in:传入参数

delimiter //
create procedure p3(
    in n1 int,
    out res int
)
BEGIN
    select * from blog where id > n1;
    set res = 1;
END //
delimiter ;

#在mysql中调用
set @res=0; #0代表假（执行失败），1代表真（执行成功）
call p3(3,@res);
select @res;

#在python中基于pymysql调用
cursor.callproc(‘p3‘,(3,0)) #0相当于set @res=0
print(cursor.fetchall()) #查询select的查询结果

cursor.execute(‘select @_p3_0,@_p3_1;‘) #@p3_0代表第一个参数，@p3_1代表第二个参数，即返回值
print(cursor.fetchall())

out：返回值

delimiter //
create procedure p4(
    inout n1 int
)
BEGIN
    select * from blog where id > n1;
    set n1 = 1;
END //
delimiter ;

#在mysql中调用
set @x=3;
call p4(@x);
select @x;


#在python中基于pymysql调用
cursor.callproc(‘p4‘,(3,))
print(cursor.fetchall()) #查询select的查询结果

cursor.execute(‘select @_p4_0;‘) 
print(cursor.fetchall())

inout:既可以传入又可以返回

#介绍
delimiter //
            create procedure p4(
                out status int
            )
            BEGIN
                1. 声明如果出现异常则执行{
                    set status = 1;
                    rollback;
                }
                   
                开始事务
                    -- 由秦兵账户减去100
                    -- 方少伟账户加90
                    -- 张根账户加10
                    commit;
                结束
                
                set status = 2;
                
                
            END //
            delimiter ;

#实现
delimiter //
create PROCEDURE p5(
    OUT p_return_code tinyint
)
BEGIN 
    DECLARE exit handler for sqlexception 
    BEGIN 
        -- ERROR 
        set p_return_code = 1; 
        rollback; 
    END; 

    DECLARE exit handler for sqlwarning 
    BEGIN 
        -- WARNING 
        set p_return_code = 2; 
        rollback; 
    END; 

    START TRANSACTION; 
        DELETE from tb1; #执行失败
        insert into blog(name,sub_time) values(‘yyy‘,now());
    COMMIT; 

    -- SUCCESS 
    set p_return_code = 0; #0代表执行成功

END //
delimiter ;

#在mysql中调用存储过程
set @res=123;
call p5(@res);
select @res;

#在python中基于pymysql调用存储过程
cursor.callproc(‘p5‘,(123,))
print(cursor.fetchall()) #查询select的查询结果

cursor.execute(‘select @_p5_0;‘)
print(cursor.fetchall())

事务

在python中的具体调用方法

-- 无参数
call proc_name()

-- 有参数，全in
call proc_name(1,2)

-- 有参数，有in，out，inout
set @t1=0;
set @t2=3;
call proc_name(1,2,@t1,@t2)

执行存储过程

在MySQL中执行存储过程

#!/usr/bin/env python
# -*- coding:utf-8 -*-
import pymysql

conn = pymysql.connect(host=‘127.0.0.1‘, port=3306, user=‘root‘, passwd=‘123‘, db=‘t1‘)
cursor = conn.cursor(cursor=pymysql.cursors.DictCursor)
# 执行存储过程
cursor.callproc(‘p1‘, args=(1, 22, 3, 4))
# 获取执行完存储的参数
cursor.execute("select @_p1_0,@_p1_1,@_p1_2,@_p1_3")
result = cursor.fetchall()

conn.commit()
cursor.close()
conn.close()


print(result)

在python中基于pymysql执行存储过程

 date_formit

#1 基本使用
mysql> SELECT DATE_FORMAT(‘2009-10-04 22:23:00‘, ‘%W %M %Y‘);
        -> ‘Sunday October 2009‘
mysql> SELECT DATE_FORMAT(‘2007-10-04 22:23:00‘, ‘%H:%i:%s‘);
        -> ‘22:23:00‘
mysql> SELECT DATE_FORMAT(‘1900-10-04 22:23:00‘,
    ->                 ‘%D %y %a %d %m %b %j‘);
        -> ‘4th 00 Thu 04 10 Oct 277‘
mysql> SELECT DATE_FORMAT(‘1997-10-04 22:23:00‘,
    ->                 ‘%H %k %I %r %T %S %w‘);
        -> ‘22 22 10 10:23:00 PM 22:23:00 00 6‘
mysql> SELECT DATE_FORMAT(‘1999-01-01‘, ‘%X %V‘);
        -> ‘1998 52‘
mysql> SELECT DATE_FORMAT(‘2006-06-00‘, ‘%d‘);
        -> ‘00‘


#2 准备表和记录
CREATE TABLE blog (
    id INT PRIMARY KEY auto_increment,
    NAME CHAR (32),
    sub_time datetime
);

INSERT INTO blog (NAME, sub_time)
VALUES
    (‘第1篇‘,‘2015-03-01 11:31:21‘),
    (‘第2篇‘,‘2015-03-11 16:31:21‘),
    (‘第3篇‘,‘2016-07-01 10:21:31‘),
    (‘第4篇‘,‘2016-07-22 09:23:21‘),
    (‘第5篇‘,‘2016-07-23 10:11:11‘),
    (‘第6篇‘,‘2016-07-25 11:21:31‘),
    (‘第7篇‘,‘2017-03-01 15:33:21‘),
    (‘第8篇‘,‘2017-03-01 17:32:21‘),
    (‘第9篇‘,‘2017-03-01 18:31:21‘);

#3. 提取sub_time字段的值，按照格式后的结果即"年月"来分组
SELECT DATE_FORMAT(sub_time,‘%Y-%m‘),COUNT(1) FROM blog GROUP BY DATE_FORMAT(sub_time,‘%Y-%m‘);

#结果
+-------------------------------+----------+
| DATE_FORMAT(sub_time,‘%Y-%m‘) | COUNT(1) |
+-------------------------------+----------+
| 2015-03                       |        2 |
| 2016-07                       |        4 |
| 2017-03                       |        3 |
+-------------------------------+----------+
rows in set (0.00 sec)

需要掌握函数：date_format