一、基本概念
oracle11gR2 RAC开始引入scan概念，一般通过dns服务器或gns服务器解析scan，也可以使用/etc/hosts文件解析scan，只不过oracle官方不建议这样做，hosts文件只能解析一个scan ip；另一个方面监听器前移到$GRID_HOME/network/admin/listener.ora文件，即11g rac监听器由grid用户管理，oracle用户保留文件，但已经不起作用。客户端文件tnsnames.ora依然在$ORACLE_HOME/network/admin/tnsnames.ora文件。scan的提出彻底做到了rac数据库对用户的透明管理，客户端通过scan域名直接连接数据库即可（首先客户端可以解析scan域名），具体由DNS服务器解析域名，这里如果用dns解析scan，最多可以解析3个scan vip，通过scan域名访问数据库可以实现scan vip的failover和负载均衡，即只要3个scan vip中存活一个，客户端应用既可以访问数据库。如果采用hosts文件解析scan，只能解析一个scan vip。
oracle 10g rac中监听器由oracle用户管理，每个节点上，只有一个监听器，但是这个监听器同时监听public ip和vip，即oracle 10g rac中的监听器同时承担着路由选择和建立连接的功能。10g rac客户端通过vip连接数据库。
oracle 11g rac中使用GRID_HOME下的监听器而不采用ORACLE_HOME 下的监听器，同时在oracle 11g rac中出现了多个监听器，使用名称区分。所以11g rac的监听器使用grid用户管理，而不能通过oracle用户进行管理。11g rac监听器分本地监听器（建立连接）和scan监听器（路由转发）2种，另外，每一个scan vip都会有一个scan监听器，并且运行在同一个节点上。即
rac中，每个节点上都运行一个本地监听器，这个监听器负责监听本地的vip。
rac中，会有3个节点上运行scan监听器。
rac中，scanvip和scan监听器成对出现。
二、监听器管理及故障处理
节点1 listener.ora配置：
[[email protected] admin]$ pwd
/u01/app/11.2.0/grid/network/admin
[[email protected] admin]$ cat listener.ora
# listener.ora.node1 Network Configuration File: /u01/app/11.2.0/grid/network/admin/listener.ora.node1
# Generated by Oracle configuration tools.
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER1 = ON
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER))
)
)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
LISTENER_SCAN3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN3))
)
)
LISTENER_SCAN2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN2))
)
)
LISTENER_SCAN1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN1))
)
)
节点2 listener.ora配置：
[[email protected] admin]$ pwd
/u01/app/11.2.0/grid/network/admin
[[email protected] admin]$ cat listener.ora
# listener.ora.node2 Network Configuration File: /u01/app/11.2.0/grid/network/admin/listener.ora.node2
# Generated by Oracle configuration tools.
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER1 = ON
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/11.2.0/grid)
(SID_NAME = orcl2)
)
)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER))
)
ADR_BASE_LISTENER = /u01/app/grid
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
LISTENER_SCAN3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN3))
)
LISTENER_SCAN2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN2))
)
LISTENER_SCAN1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = LISTENER_SCAN1))
)
ADR_BASE_LISTENER_SCAN3 = /u01/app/grid
ADR_BASE_LISTENER_SCAN2 = /u01/app/grid
ADR_BASE_LISTENER_SCAN1 = /u01/app/grid
1、查看scan vip配置
节点1：
[[email protected] admin]$ srvctl config scan
SCAN name: scan-cluster, Network: 1/192.168.100.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /scan-cluster/192.168.100.45
SCAN VIP name: scan2, IP: /scan-cluster/192.168.100.46
SCAN VIP name: scan3, IP: /scan-cluster/192.168.100.47
节点2：
[[email protected] admin]$ srvctl config scan
SCAN name: scan-cluster, Network: 1/192.168.100.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /scan-cluster/192.168.100.45
SCAN VIP name: scan2, IP: /scan-cluster/192.168.100.46
SCAN VIP name: scan3, IP: /scan-cluster/192.168.100.47
2、查看scan vip状态（静态）
节点1：
[grid@node1 admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node node2
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node node2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node node1
节点2：
[grid@node2 admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node node2
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node node2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node node1
3、查看scan vip状态（动态）
节点1：
[[email protected] admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node node2
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node node2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node node1
节点2：
[[email protected] admin]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node node2
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node node2
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node node1
4、查看scan listener配置
节点1：
[[email protected] admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
节点2：
[[email protected] admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
5、查看scan listener状态
节点1：
[[email protected] admin]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node node2
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node node1
节点2：
[[email protected] admin]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node node2
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node node1
lsnrct命令查看scan vip状态：
节点1：
[[email protected] admin]$ lsnrctl status LISTENER_SCAN3
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 25-MAR-2016 16:09:39
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))
STATUS of the LISTENER
------------------------
Alias LISTENER_SCAN3
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start Date 25-MAR-2016 11:24:15
Uptime 0 days 4 hr. 45 min. 23 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/11.2.0/grid/log/diag/tnslsnr/node1/listener_scan3/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_SCAN3)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.100.47)(PORT=1521)))
Services Summary...
Service "orcl" has 2 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Instance "orcl2", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 2 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Instance "orcl2", status READY, has 1 handler(s) for this service...
The command completed successfully
6、查看本地监听器配置
节点1：
[[email protected] admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: grid
Home: <CRS home>
End points: TCP:1521
节点2：
[[email protected] admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: grid
Home: <CRS home>
End points: TCP:1521
7、查看本地监听器状态
节点1：
[[email protected] admin]$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): node2,node1
节点2：
[[email protected] admin]$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): node2,node1
lsnrctl查看本地监听器状态：
节点1：
[[email protected] admin]$ lsnrctl status listener
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 25-MAR-2016 16:08:03
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start Date 25-MAR-2016 11:24:17
Uptime 0 days 4 hr. 43 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.100.41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.100.42)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
The command completed successfully
8、查看本地运行的监听器
节点1：
[[email protected] admin]$ ps -ef|grep lsnr
grid 6290 8174 0 16:12 pts/1 00:00:00 grep lsnr
grid 23796 1 0 11:24 ? 00:00:00 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
grid 23859 1 0 11:24 ? 00:00:00 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
节点2：
[[email protected] admin]$ ps -ef|grep lsnr
grid 8649 1 0 11:44 ? 00:00:00 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
grid 10591 1 0 Mar24 ? 00:00:01 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 18776 6639 0 16:13 pts/1 00:00:00 grep lsnr
grid 24334 1 0 Mar24 ? 00:00:02 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN1 -inherit
9、查看数据库服务的状态
[[email protected] admin]$ lsnrctl service
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 25-MAR-2016 16:19:54
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: node1, pid: 11849>
(ADDRESS=(PROTOCOL=tcp)(HOST=node1)(PORT=43836))
The command completed successfully