Heartbeat+Drbd+Mysql主从高可用实现

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了Heartbeat+Drbd+Mysql主从高可用实现相关的知识,希望对你有一定的参考价值。

在上一篇中已经实现了mysql服务的高可用,MySQL的数据目录放在drbd的共享目录中,并且只有获取到heartbeat资源的VIP才能挂载共享目录,从而启动MySQL服务,但是两端的数据使用drbd同步,保证发生故障时,服务和资源能够从一个节点切换到另外一个节点,下面是一个简略的架构图:

技术分享

对于MySQL服务,一般在生产环境中都要做主从结构,从而保证数据的完整性,所以这次要在这个架构的前提下,在两个heartbeat节点下再部署一台MySQL从库,而主库是heartbeat集群中的一台(主库的IP设置为VIP地址),从而实现发生故障时,从库可以自动切换到另一台主库下面,主从同步的状态保持稳定。

技术分享

当heartbeat01获取VIP时,MySQL主库跑在heartbeat01上,MySQL从库从heartbeat01同步数据,heartbeat02相当于备份服务器,通过drbd的块设备同步heartbeat01上drbd目录的内容。

技术分享

当heartbeat02获取VIP时,MySQL主库跑在heartbeat02上,MySQL从库从heartbeat02同步数据,heartbeat01相当于备份服务器,通过drbd的块设备同步heartbeat02上drbd目录的内容。

注意:本文中出现的节点1/节点2都是指heartbeat的节点,而Master节点/Slave节点都是指MySQL节点。

一、环境准备

这里需要添加一台主机,主要信息如下:

主机名角色IP地址
server136.contoso.comMySQL从库(Slave)192.168.49.136

以下都在上一篇的基础上完成Heartbeat+Drbd+MySQL高可用》

1)两个节点上依次启动heartbeat服务:

[[email protected] ~]# /etc/init.d/heartbeat start

Starting High-Availability services: INFO:  Resource is stopped

Done.

[[email protected] ~]# /etc/init.d/heartbeat start

Starting High-Availability services: INFO:  Resource is stopped

Done.

2)检查两个节点的状态

节点1heartbeat01:

[[email protected] ~]# ip a |grep 49.100

    inet 192.168.49.100/24 scope global eth1

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----

    ns:216 nr:0 dw:216 dr:3929 al:4 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data

total 16

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 lib

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:21 lock

drwxr-xr-x 2 mysql mysql 4096 Sep 27 01:18 log

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 run

[[email protected] ~]# /etc/init.d/mysqld status

mysqld (pid  2414) is running...

[[email protected] ~]# lsof -i :3306

COMMAND  PID  USER   FD   TYPE DEVICE SIZE/OFF NODE NAME

mysqld  2414 mysql   18u  IPv4  12859      0t0  TCP *:mysql (LISTEN)


节点2 heartbeat02:

[[email protected] ~]# ip a |grep 49.100

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r-----

    ns:0 nr:784 dw:784 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data

total 0

[[email protected] ~]# /etc/init.d/mysqld status

mysqld is stopped

二、MySQL主从复制

1、配置heartbeat01

因为节点1(heartbeat01)目前正在运行数据库,所以需要先在heartbeat01上进行配置,当然如果MySQL和heartbeat的资源正在运行在heartbeat02上,也可以先对heartbeat02进行配置,配置的目的是保证两个节点上MySQL Master节点的配置完成,且能正常运行。

1)配置/etc/my.cnf,添加Master配置

[[email protected] ~]# cp /etc/my.cnf /etc/my.cnf.bak$(date +%F)

[[email protected] ~]# vi /etc/my.cnf

[[email protected] ~]# diff /etc/my.cnf.bak2016-09-27 /etc/my.cnf

6a7,10

> ######################################

> #add master settings

> log-bin=mysql-bin

> server-id=1

# 主从配置就不多讲了,网上的教程有很多,这里也只是开启了binlog并添加serverID,没有做详细的设置。

2)导出Master节点的数据

[[email protected] ~]# mysqldump -uroot -p123456 --database tb01 > /root/tb01.sql

# 因为之前我创建了一个tb01的数据库,所以这里先将该数据库备份

[[email protected] ~]# ll tb01.sql 

-rw-r--r-- 1 root root 2008 Sep 27 22:14 tb01.sql

[[email protected] ~]# scp tb01.sql 192.168.49.136:/tmp/

[email protected]‘s password: 

tb01.sql                                                   100% 2008     2.0KB/s   00:00    

# 然后通过scp拷贝到MySQL从库(server136)上

3)创建备份账号

[[email protected] ~]# mysql -uroot -p123456

# 登录MySQL

mysql> grant replication slave on *.* to ‘replication‘@‘192.168.49.136‘ identified by ‘[email protected]‘;
Query OK, 0 rows affected (0.00 sec)


# 创建主从同步账号并授权

mysql> select Host,User,Password from mysql.user;
+-------------------------+-------------+-------------------------------------------+
| Host                    | User        | Password                                  |
+-------------------------+-------------+-------------------------------------------+
| localhost               | root        | *6BB4837EB74329105EE4568DDA7DC67ED2CA2AD9 |
| heartbeat01.contoso.com | root        |                                           |
| 127.0.0.1               | root        |                                           |
| localhost               |             |                                           |
| heartbeat01.contoso.com |             |                                           |
| 192.168.49.136          | replication | *6E0E8E398CC10050A0AF2E9B4B27FBF3181D220A |
+-------------------------+-------------+-------------------------------------------+
6 rows in set (0.00 sec)

# 检查一下创建的结果

mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
mysql> quit
Bye

4)重启MySQL,查询Master状态

[[email protected] ~]# /etc/init.d/mysqld restart
mysql> show master status;
+------------------+----------+--------------+------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000001 |      344 |              |                  |
+------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
mysql> quit
Bye

2、配置heartbeat02

因为heartbeat02暂时没有获取VIP,也未运行MySQL服务,所以只需要修改/etc/my.cnf文件,将Master的配置加入进去即可,这里采用scp的方式从节点1上复制过来。

[[email protected] ~]# mv /etc/my.cnf /etc/my.cnf.bak$(date +%F)

[[email protected] ~]# scp heartbeat01:/etc/my.cnf /etc/

Warning: Permanently added the RSA host key for IP address ‘172.16.49.133‘ to the list of known hosts.

[email protected]‘s password: 

my.cnf                                                     100%  345     0.3KB/s   00:00    

[[email protected] ~]# diff /etc/my.cnf.bak2016-09-27 /etc/my.cnf

6a7,10

> ######################################

> #add master settings

> log-bin=mysql-bin

> server-id=1

3、配置Slave节点(server136)

1)安装MySQL

[[email protected] ~]# yum -y install mysql-devel mysql-server

[[email protected] ~]# /etc/init.d/mysqld start

[[email protected] ~]# mysqladmin -uroot password ‘123456‘

2)修改配置文件

[[email protected] ~]# cp /etc/my.cnf /etc/my.cnf.bak$(date +%F)

[[email protected] ~]# vi /etc/my.cnf

[[email protected] ~]# diff /etc/my.cnf.bak2016-09-28 /etc/my.cnf

6a7,9

> ####################################

> #add slave settings

> server-id=2

# 只需要在/etc/my.cnf中添加一行server-id=值

3)导入Master上导出的数据

[[email protected] ~]# /etc/init.d/mysqld restart

Stopping mysqld:                                           [  OK  ]

Starting mysqld:                                           [  OK  ]

[[email protected] ~]# mysql -uroot -p123456 < /tmp/tb01.sql

下面进入MySQL数据库查看一下导入的数据:

[[email protected] ~]# mysql -uroot -p123456

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 6

Server version: 5.1.73 Source distribution


Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.


Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.


Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.


mysql> select * from tb01.staff;

+----+-------+

| id | name  |

+----+-------+

|  1 | Tom   |

|  2 | Jerry |

+----+-------+

2 rows in set (0.01 sec)


mysql> quit

Bye

4)启动slave节点

mysql> change master to 
    -> master_host = ‘192.168.49.100‘,
    -> master_user = ‘replication‘,
    -> master_password = ‘[email protected]‘,
    -> master_log_file = ‘mysql-bin.000001‘,
    -> master_log_pos = 344;
Query OK, 0 rows affected (0.10 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
mysql> show slave status\G
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.49.100
                  Master_User: replication
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: mysql-bin.000001
          Read_Master_Log_Pos: 344
               Relay_Log_File: mysqld-relay-bin.000002
                Relay_Log_Pos: 251
        Relay_Master_Log_File: mysql-bin.000001
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes #这两项为Yes说明主从复制成功
              Replicate_Do_DB: 
          Replicate_Ignore_DB: 
           Replicate_Do_Table: 
       Replicate_Ignore_Table: 
      Replicate_Wild_Do_Table: 
  Replicate_Wild_Ignore_Table: 
                   Last_Errno: 0
                   Last_Error: 
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 344
              Relay_Log_Space: 407
              Until_Condition: None
               Until_Log_File: 
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File: 
           Master_SSL_CA_Path: 
              Master_SSL_Cert: 
            Master_SSL_Cipher: 
               Master_SSL_Key: 
        Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 0
                Last_IO_Error: 
               Last_SQL_Errno: 0
               Last_SQL_Error: 
1 row in set (0.00 sec)

5)主从复制测试

现在在Master上创建一张表,并插入数据:

[[email protected] ~]# mysql -uroot -p123456
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 11
Server version: 5.1.73-log Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql> use tb01;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> create table test01( id int not null, name varchar(100), age int, sex varchar(20), city varchar(40) );
Query OK, 0 rows affected (0.05 sec)
mysql> insert into test01 values (001,‘zhangsan‘,20,‘Male‘,‘Beijing‘);
Query OK, 1 row affected (0.00 sec)
mysql> insert into test01 values (002,‘lisi‘,25,‘Male‘,‘Shanghai‘);
Query OK, 1 row affected (0.00 sec)
mysql> insert into test01 values (003,‘wangwu‘,28,‘Female‘,‘Shenzhen‘);
Query OK, 1 row affected (0.00 sec)
mysql> select * from test01;
+----+----------+------+--------+----------+
| id | name     | age  | sex    | city     |
+----+----------+------+--------+----------+
|  1 | zhangsan |   20 | Male   | Beijing  |
|  2 | lisi     |   25 | Male   | Shanghai |
|  3 | wangwu   |   28 | Female | Shenzhen |
+----+----------+------+--------+----------+
3 rows in set (0.00 sec)

然后到Slave上去查看,是否存在对应的表和数据:

[[email protected] ~]# mysql -uroot -p123456
mysql> use tb01;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> show tables;
+----------------+
| Tables_in_tb01 |
+----------------+
| staff          |
+----------------+
1 row in set (0.00 sec)
mysql> show tables;
+----------------+
| Tables_in_tb01 |
+----------------+
| staff          |
| test01         |
+----------------+
2 rows in set (0.00 sec)
mysql> select * from test01;
+----+----------+------+--------+----------+
| id | name     | age  | sex    | city     |
+----+----------+------+--------+----------+
|  1 | zhangsan |   20 | Male   | Beijing  |
|  2 | lisi     |   25 | Male   | Shanghai |
|  3 | wangwu   |   28 | Female | Shenzhen |
+----+----------+------+--------+----------+
3 rows in set (0.00 sec)

在Slave上可以看到Master上创建的表和插入的数据,说明主从复制正常。

三、MySQL的Master节点故障切换测试

1、首先停止heartbeat01上的heartbeat服务

[[email protected] ~]# /etc/init.d/heartbeat stop

Stopping High-Availability services: Done.


[[email protected] ~]# 

此时,heartbeat01上的状态为:

[[email protected] ~]# ip a |grep 49.100

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r-----

    ns:1004 nr:416 dw:1420 dr:3981 al:7 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data/

total 0

[[email protected] ~]# /etc/init.d/mysqld status

mysqld is stopped

heartbeat02上的状态为:

[[email protected] ~]# ip a |grep 49.100

    inet 192.168.49.100/24 scope global eth1

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----

    ns:340 nr:1004 dw:1344 dr:3937 al:6 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data

total 16

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 lib

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:21 lock

drwxr-xr-x 2 mysql mysql 4096 Sep 27 01:18 log

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 run

[[email protected] ~]# /etc/init.d/mysqld status

mysqld (pid  2629) is running...

[[email protected] ~]# lsof -i :3306

COMMAND  PID  USER   FD   TYPE DEVICE SIZE/OFF NODE NAME

mysqld  2629 mysql   18u  IPv4  14300      0t0  TCP *:mysql (LISTEN)

2、检查主从同步状态

1)在Slave节点上查看Slave状态

mysql> show slave status\G
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.49.100
                  Master_User: replication
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: mysql-bin.000002
          Read_Master_Log_Pos: 106
               Relay_Log_File: mysqld-relay-bin.000007
                Relay_Log_Pos: 251
        Relay_Master_Log_File: mysql-bin.000002
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
              Replicate_Do_DB: 
          Replicate_Ignore_DB: 
           Replicate_Do_Table: 
       Replicate_Ignore_Table: 
      Replicate_Wild_Do_Table: 
  Replicate_Wild_Ignore_Table: 
                   Last_Errno: 0
                   Last_Error: 
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 106
              Relay_Log_Space: 552
              Until_Condition: None
               Until_Log_File: 
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File: 
           Master_SSL_CA_Path: 
              Master_SSL_Cert: 
            Master_SSL_Cipher: 
               Master_SSL_Key: 
        Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 0
                Last_IO_Error: 
               Last_SQL_Errno: 0
               Last_SQL_Error: 
1 row in set (0.00 sec)

2)在heartbeat02上进入MySQL新增一条数据,查看从库能否同步

[[email protected] ~]# mysql -uroot -p123456
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.1.73-log Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql> select * from tb01.test01;
+----+----------+------+--------+----------+
| id | name     | age  | sex    | city     |
+----+----------+------+--------+----------+
|  1 | zhangsan |   20 | Male   | Beijing  |
|  2 | lisi     |   25 | Male   | Shanghai |
|  3 | wangwu   |   28 | Female | Shenzhen |
+----+----------+------+--------+----------+
3 rows in set (0.04 sec)
mysql> use tb01;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> insert into test01 values(4,‘zhaosi‘,40,‘Male‘,‘Tieling‘);
Query OK, 1 row affected (0.00 sec)
mysql> insert into test01 values(5,‘xiaoshenyang‘,34,‘Male‘,‘Shenyang‘);
Query OK, 1 row affected (0.00 sec)
mysql> select * from tb01.test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  2 | lisi         |   25 | Male   | Shanghai |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
5 rows in set (0.01 sec)

然后到Slave上进行查看同步状况:

mysql> show tables;
+----------------+
| Tables_in_tb01 |
+----------------+
| staff          |
| test01         |
+----------------+
2 rows in set (0.00 sec)
mysql> select * from test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  2 | lisi         |   25 | Male   | Shanghai |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
5 rows in set (0.00 sec)

在Slave上能看到Master上新插入的两条数据,说明主从同步没有问题,主节点的切换不影响Slave的同步。

3、再次开启heartbeat01上的heartbeat服务,查看heartbeat01上是否有heartbeat02上插入的数据

[[email protected] ~]# /etc/init.d/heartbeat start

Starting High-Availability services: INFO:  Resource is stopped

Done.

1)heartbeat01的状态

[[email protected] ~]# ip a |grep 49.100

    inet 192.168.49.100/24 scope global eth1

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----

    ns:1256 nr:740 dw:1996 dr:7918 al:8 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data/

total 16

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 lib

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:21 lock

drwxr-xr-x 2 mysql mysql 4096 Sep 27 01:18 log

drwxr-xr-x 3 mysql mysql 4096 Sep 27 01:17 run

[[email protected] ~]# /etc/init.d/mysqld status

mysqld (pid  4211) is running...

[[email protected] ~]# lsof -i :3306

COMMAND  PID  USER   FD   TYPE DEVICE SIZE/OFF NODE NAME

mysqld  4211 mysql   19u  IPv4  16116      0t0  TCP *:mysql (LISTEN)

mysqld  4211 mysql   39u  IPv4  16163      0t0  TCP 192.168.49.100:mysql->192.168.49.136:36693 (ESTABLISHED)

2)heartbeat02的状态:

[[email protected] ~]# ip a|grep 49.100

[[email protected] ~]# cat /proc/drbd

version: 8.3.16 (api:88/proto:86-97)

GIT-hash: a798fa7e274428a357657fb52f0ecf40192c1985 build by [email protected], 2014-11-24 14:51:37

 0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r-----

    ns:740 nr:1360 dw:2100 dr:4005 al:8 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

[[email protected] ~]# ll /data

total 0

[[email protected] ~]# /etc/init.d/mysqld status

mysqld is stopped

3)在heartbeat01上登录MySQL查看是否有heartbeat02上插入的数据

[[email protected] ~]# mysql -uroot -p123456

mysql> select * from tb01.test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  2 | lisi         |   25 | Male   | Shanghai |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
5 rows in set (0.03 sec)

可以看到,heartbeat02上插入的数据也已经通过drbd同步成功了。

4)再次检查Slave节点上的主从同步状态

mysql> show slave status\G;
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.49.100
                  Master_User: replication
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: mysql-bin.000003
          Read_Master_Log_Pos: 106
               Relay_Log_File: mysqld-relay-bin.000009
                Relay_Log_Pos: 251
        Relay_Master_Log_File: mysql-bin.000003
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
              Replicate_Do_DB: 
          Replicate_Ignore_DB: 
           Replicate_Do_Table: 
       Replicate_Ignore_Table: 
      Replicate_Wild_Do_Table: 
  Replicate_Wild_Ignore_Table: 
                   Last_Errno: 0
                   Last_Error: 
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 106
              Relay_Log_Space: 552
              Until_Condition: None
               Until_Log_File: 
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File: 
           Master_SSL_CA_Path: 
              Master_SSL_Cert: 
            Master_SSL_Cipher: 
               Master_SSL_Key: 
        Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 0
                Last_IO_Error: 
               Last_SQL_Errno: 0
               Last_SQL_Error: 
1 row in set (0.00 sec)

在server136上可以看到,主从状态依然正常。

5)在heartbeat01上删除一条记录

mysql> select * from tb01.test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  2 | lisi         |   25 | Male   | Shanghai |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
5 rows in set (0.03 sec)
mysql> delete from tb01.test01 where name = ‘lisi‘;
Query OK, 1 row affected (0.00 sec)
mysql> select * from tb01.test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
4 rows in set (0.00 sec)

6)在Slave节点(server136)上进行查询

[[email protected] ~]# mysql -uroot -p123456
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 6
Server version: 5.1.73 Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql> select * from tb01.test01;
+----+--------------+------+--------+----------+
| id | name         | age  | sex    | city     |
+----+--------------+------+--------+----------+
|  1 | zhangsan     |   20 | Male   | Beijing  |
|  3 | wangwu       |   28 | Female | Shenzhen |
|  4 | zhaosi       |   40 | Male   | Tieling  |
|  5 | xiaoshenyang |   34 | Male   | Shenyang |
+----+--------------+------+--------+----------+
4 rows in set (0.00 sec)
mysql> quit
Bye
[[email protected] ~]#

可以看到,数据已经同步,说明主从同步没有问题。至此,heartbeat+drbd+MySQL主从高可用的部署完成。

本文出自 “IT小二郎” 博客,请务必保留此出处http://jerry12356.blog.51cto.com/4308715/1857391

以上是关于Heartbeat+Drbd+Mysql主从高可用实现的主要内容,如果未能解决你的问题,请参考以下文章

Heartbeat+DRBD+MySQL高可用方案

Heartbeat+Drbd+MySQL高可用

MySQL之高可用架构—MHA

15 Heartbeat+DRBD+MySQL高可用架构方案与实施过程细节

mysql高可用集群方案

MySQL+Heartbeat+DRBD+LVS+keepalived实现数据库高可用群集