如何计算Hits per second

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了如何计算Hits per second相关的知识,希望对你有一定的参考价值。

当您怀疑计算机硬件是影响SQLServer运行性能的主要原因时,可以通过SQLServerPerformanceMonitor监视相应硬件的负载,以证实您的猜测并找出系统瓶颈。下文将介绍一些常用的分析对象及其参数。  Windows资源监控中,如果%DiskTime和Avg.DiskQueueLength的值很高,而PageReads/sec页面读取操作速率很低,则可能存在磁盘瓶径。  Processor%PrivilegedTime该参数值一直很高,且如果在PhysicalDisk计数器中,只有%Disktime比较大,其他值都比较适中,硬盘可能会是瓶颈。若几个值都比较大,那么硬盘不是瓶颈。若数值持续超过80%,则可能是内存泄露。如果PhysicalDisk计数器的值很高时该计数器的值(Processor%PrivilegedTime)也一直很高,则考虑使用速度更快或效率更高的磁盘子系统。  Disksec/Transfer一般来说,该数值小于15ms为最好,介于15-30ms之间为良好,30-60ms之间为可以接受,超过60ms则需要考虑更换硬盘或是硬盘的RAID方式了.  AverageTransacitonResponseTime(事务平均响应时间)随着测试时间的变化,系统处理事务的速度开始逐渐变慢,这说明应用系统随着投产时间的变化,整体性能将会有下降的趋势  TransactionsperSecond(每秒通过事务数/TPS)当压力加大时,点击率/TPS曲线如果变化缓慢或者有平坦的趋势,很有可能是服务器开始出现瓶颈  HitsperSecond(每秒点击次数)通过对查看“每秒点击次数”,可以判断系统是否稳定。系统点击率下降通常表明服务器的响应速度在变慢,需进一步分析,发现系统瓶颈所在。  Throughput(吞吐率)可以依据服务器的吞吐量来评估虚拟用户产生的负载量,以及看出服务器在流量方面的处理能力以及是否存在瓶颈。  Connections(连接数)当连接数到达稳定状态而事务响应时间迅速增大时,添加连接可以使性能得到极大提高(事务响应时间将降低)  TimetoFirstBufferBreakdown(OverTime)(第一次缓冲时间细分(随时间变化))可以使用该图确定场景或会话步骤运行期间服务器或网络出现问题的时间。 参考技术A Hits per second
点击数

拼音 双语对照
Hits per second
网络点击数; 每秒点击次数

双语例句
1
If the rate exceeds the configured threshold ( 250 hits per 30 second time interval,in this example), the system will transition to stage 3.
如果该速率超过配置的阈值(在本实例中,每30秒时间间隔250次点击)时,该系统将转换到第三阶段。本回答被提问者采纳

ASP.NET Core – 2300% More Requests Served Per Second

http://www.ageofascent.com/asp-net-core-exeeds-1-15-million-requests-12-6-gbps/

ASP.NET Core – Exceeds 1.15 Million request/s, 12.6 Gbps

Congratulations to ASP.NET Core and .NET Core teams and the Open Source .NET community for quite a milestone in performance!

2300% More Requests Served Per Second

技术分享

1.15 Million represents a 2300% gain from ASP.NET 4.6!

Why 2 decimal places? I’m not sure why Scott Hunter chose that level of precision, but to me it’s quite significant…

The third decimal place 0.05 Million (e.g. 50,000) is around the total number of requests per second that ASP.NET 4.6 could perform of the same type, on the same hardware – as shown in the below graph:

技术分享

ASP.NET 4.6 and NodeJs are bottom left. You can see the rapid strides in performance the leaner, more agile and componentized stack has taken (blue Windows, orange Linux) in just a few short months.

ASP.NET Core and .NET Core come with the great advantage of only including the libraries and functions you explicitly want to use in your application rather than bringing in the entire framework. So you only “pay”, programmatically speaking, for what you use.

This ethos is being repeated around Microsoft: Nano Server (Windows Server 2016) is so slim it only has 21 processes running – including your application! In a similar vein, Azure has ‘to the nearest minute’ billing on VMs.

 

 

技术分享

 

 

This also allows easy side by side installation of different versions of the .NET framework on the same machine without version collision – or the fear of “What will happen to all the other apps on the same machine when I upgrade the framework for this app”. While .NET has always had a great version compatibility story, the upgrade fear is real.

More than 12.6 Gbps of Throughput

1,150,000+ requests served per second is for small fine-grained requests; but how does it perform for serving larger requests e.g. video, images, js, fonts and css files?

 

 

技术分享

 

 

Running on an Azure G4 VM you can see we can hit 12.6 Gbps while only using 36% CPU. This is around the network cap for this type of machine – or we’d be going even faster!

Why is this important?

At a business level it means we can do more with less – which directly effects our bottom line.

I often hear the defeatist argument that performance like this doesn’t matter because (eg) “my database is slow”. That’s like saying I might as well use php in interpreted mode because “my database is slow” (has any one ever said that? I hope not). There is so much more potential, and it’s not just about raw throughput!

Looking at the simplistic case; I’d hope you aren’t serving your assets from a slow database… If you are, maybe you should reexamine your architecture choices or at least revisit what you are doing in the caching space. Everyone caches, even your CPU.

Moving to the cloud with on-demand scaling will also save you money. Or you can spend the same amount of money – but do a lot more.

Customer Delight

If you can leverage it, the question you should ask is whether the hugely improved response times of ASP.NET Core will delight your users.

Steve Desmond in his post Performance is Paramount; saw his page response times from upgrading from Beta8 (Oct 2015) to RC1 (Nov 2015) decrease from 20ms to 4ms.

 

Bear in mind ASP.NET Core beta8 was already 800% faster than ASP.NET 4.6, which itself was pretty nippy compared to many web frameworks and languages. RC2 is shaping up to be even faster – throw in some caching and you’ll be going back in time! 技术分享

Microsoft, Open Source & the .NET Foundation

Parts of ASP.NET have been open source awhile and the .NET source has been viewable also, but at the Build 2014 conference Microsoft announced the creation of the .NET Foundation as an independent forum to provide stewardship and to foster open development and collaboration for the growing collection of open source technologies of .NET.

In November 2014, they then announced that .NET Core was Open Source under the .NET Foundation and accepting contributions. It rapidly became cross-platform, running on Windows, Mac and Linux – with Mono and Xamarinproviding even wider platform support – including Android and iOS.

Is open source good for .NET? Has it changed anything? As an example of what is different is myself, Ben Adams at Illyriad Games and Stephen Halter at Microsoft jostling for the top spot on contributions to Kestrel, ASP.NET’s Web Server. This wouldn’t have happened previously!

技术分享

Contributing to .NET OSS

We like open source because it gives us the best of both worlds: a great diversity of minds from all around the world with wider viewpoints than our own – including specialists in their field – with the ability to contribute if we need changes or fixes to suit our more particular needs.

Generally the community will build (and often improve) upon our contribution; enriching it for better code for all. Much like life; diversity is a good thing!

It also has the fringe bonus that Microsoft checks and reviews our code and – once it gets into a release build – they offer an Enterprise support agreement for it if anything goes wrong 技术分享

Why Is a High Performance ASP.NET Important to Illyriad Games?

We are building Age Of Ascent – an ultra-MMO; a new scale of game. Born in the cloud, it enables tens of thousands of pilots to be in the same battle; and millions of players to be in the same single-sharded universe – which can be accessed anywhere at any time, on any device.

It has real-time twitch combat, and yet is playable in a browser using HTML5 and WebGL.

 

 

 

 

So we need a high performance, high throughput, low latency web server. This might be a bit of a niche case and the world of a high speed real-time web may not be applicable to everyone.

However, this is not our only use case, and not the only reason we contribute back to improve ASP.NET and .NET Core’s performance. Age of Ascent is a lot more than a twitch space combat game.

Our other main component is likely more applicable to a wider audience.

Micro-services

Age Of Ascent is composed of multiple independent, dynamically scalable, stateful and stateless micro-services hosted and orchestrated with Service Fabric on Microsoft Azure. Service Fabric allows us to have a high density micro-service cluster which both scales to unexpected demands and grows as we grow.

技术分享

Our communication mechanism between these micro-services is entirely ASP.NET Core based on David Zhao’s excellentService Fabric ASP.NET Core Hosting example.

This means our entire system’s responsiveness and performance hinges on the performance of ASP.NET Core. This is why it is important; and why we strive for performance. The more we can do; the richer an experience we can create for our players – at a lower cost.

Its important also because the days of Moore’s law performance improvements for single CPU cores are long gone; yet we also need to do more, and we are going big – really big. We need to get smarter, more efficient, cut the unnecessary, and scale across cores, sockets, containers and clusters of machines better.

.NET Core and ASP.NET Core are really shaping up to be the frameworks that we not only want, but also need.

Congratulations to the team!

以上是关于如何计算Hits per second的主要内容,如果未能解决你的问题,请参考以下文章

计算pi的位数

在python的IDLE中计算Π值的代码错误在哪?

用python计算圆周率

LR性能测试衡量指标

计算思维:蒙特卡罗方法求“圆周率”

zabbix自定义脚本监控pps(Packets per Second,包转发率)_下