微服务实战系列-网关高可用之中间件Keepalived

Posted 软件老王

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了微服务实战系列-网关高可用之中间件Keepalived相关的知识,希望对你有一定的参考价值。

1.场景描述

因为要做网关的高可用,用到了keepalived+nginx,来保证nginx的高可用,如下图:

安装了keepavlived,走了一些弯路,记录下吧,nginx的安装就不多说了,自己博客已经介绍了好几篇了。

2. 解决方案

2.1 安装keepalived

2.1.1 安装相关依赖包

[root@t-ruanjianlaowang ~]# yum install -y libnl*[root@t-ruanjianlaowang ~]# yum install -y libnfnetlink-devel zlib zlib-devel gcc gcc-c++ openssl openssl-devel openssh

假如连不了,网上也有这些包的下载,下载后tar解压也行。

2.1.2 下载并安装keepalived

我们使用的版本:keepalived-2.0.18.tar.gz,993k

tar -zxvf keepalived-2.0.18.tar.gzcd keepalived-2.0.18/./configure --prefix=/usr/local/keepalivedmakemake install

2.1.3 添加keepavlived为系统服务

[root@t-ruanjianlaowang ~]# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/keepalived [root@t-ruanjianlaowang ~]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/keepalived[root@t-ruanjianlaowang ~]# cp /root/tools/keepalived-2.0.18/keepalived/etc/init.d/keepalived /etc/init.d/keepalived#/etc/keepalived下好像有了keepalived文件夹,有了就不用mkdir了,软件老王[root@t-ruanjianlaowang ~]# mkdir /etc/keepalived [root@t-ruanjianlaowang ~]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf

2.1.4 设置开机启动

# 设置开机启动[root@t-ruanjianlaowang ~]# chkconfig keepalived on[root@t-ruanjianlaowang ~]# service keepalived start|stop|restart

到这里仅仅是keepalived安装完成,接下来还要根据项目项目配置keepalived.conf信息。

2.2 配置文件修改

2.2.1 master的conf配置文件

vi cd /etc/keepalived/keepalived.conf
!Configuration File for keepalivedglobal_defs { router_id RUANJIANLAOWANG_MASTER}vrrp_script chk_nginx {script "/etc/keepalived/nginx_check.sh"interval 2weight -20}vrrp_instance VI_1 {state MASTERinterface ens666 #这里必须非常注意,软件老王刚开始没太注意,这里是你的网卡名称virtual_router_id 81 #这个会在backup机器上用到priority 100advert_int 1authentication {auth_type PASSauth_pass 1111}track_script {chk_nginx}virtual_ipaddress {10.192.168.21}}

2.2.2 还有个检查nginx是否挂掉的sh,也上传下

vi nginx_check.sh
#!/bin/bashcounter=$(ps -C nginx --no-heading|wc -l)if [ "${counter}" = "0" ]; then /usr/sbin/nginx sleep 2 counter=$(ps -C nginx --no-heading|wc -l) if [ "${counter}" = "0" ]; then /etc/init.d/keepalived stop fifi

2.2.3 backup机器上conf文件

/bin/bash: Configuration: command not foundbal_defs { router_id RUANJIANLAOWANG2}vrrp_script chk_nginx {script "/etc/keepalived/nginx_check.sh" ## 检测 nginx 状态的脚本路径interval 2 ## 检测时间间隔weight -20 ## 如果条件成立,权重-20}vrrp_instance VI_1 {state BACKUPinterface ens168virtual_router_id 81priority 90advert_int 1authentication {auth_type PASSauth_pass 111track_script { chk_nginx ## 执行 Nginx 监控的服务,软件老王 }virtual_ipaddress {10.192.168.21 }}

这里记着也把检查nginx的sh文件上传上,跟master上的一样。

2.3 启动

(1)配置完成后开始启动

[root@t-ruanjianlaowang ~]# service keepalived start

(2)启动过程中,打开日志看一下(刚开始可能会有问题,看下日志啥都明白了)

[root@t-ruanjianlaowang ~]# tail -f /var/log/messages

(3)假如启动不了,可以尝试以下方式。

[root@t-ruanjianlaowang ~]# systemctl daemon-reload#上面试过后,不行再重新注册服务[root@t-ruanjianlaowang ~]#chkconfig --del keepalived[root@t-ruanjianlaowang ~]# cd /usr/lib/systemd/system/[root@t-ruanjianlaowang ~]#rm -rf keepalived.service[root@t-ruanjianlaowang ~]# chkconfig --add keepalived

2.4 验证

[root@t-ruanjianlaowang ~]#ip addr show ens666[root@t-ruanjianlaowang ~]#ip addr show ens168ens666ens168为网卡名称假如绑定成功,软件老王机器里显示的信息里面会有:10.192.168.21的显示
END/往期推荐:




1.

2.

3.

4.

5

原创不易,如果觉得有点用的话,请毫不留情地素质三连吧,分享、点赞、在看,我不挑,因为这将是我写作更多优质文章的最强动力。

以上是关于微服务实战系列-网关高可用之中间件Keepalived的主要内容,如果未能解决你的问题,请参考以下文章

9.Go语言高并发与微服务实战 --- 微服务网关

.Net微服务实战之可观测性

微服务实战:选择微服务部署策略

SpringCloud Alibaba微服务实战三十四 - 隐私接口禁止外部访问

精通系列)创建 Springboot 项目+基于 ssm 多模块项目案例+微服务实战

重新理解微服务之它还那么纯粹吗?