kubeadm方式部署k8s集群
Posted _雪辉_
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了kubeadm方式部署k8s集群相关的知识，希望对你有一定的参考价值。
文章目录
一、基础配置
1.1 将master节点和node节点配置到/etc/hosts
略
1.2 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
setenforce 0 && sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
1.3 关闭swap缓存
cat>>/etc/sysctl.conf <<EOF
vm.swappiness = 0
二、 软件部署
2.1 内核配置
modprobe br_netfilter
lsmod | grep br_netfilter
cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOF
cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sudo sysctl --system
2.2 启动kubelet
# 启动docker
mkdir /etc/docker
cat >> /etc/docker/daemon.json <<EOF
"exec-opts": ["native.cgroupdriver=systemd"],
"log-driver": "json-file",
"log-opts":
"max-size": "100m"
,
"storage-driver": "overlay2",
"storage-opts": [
"overlay2.override_kernel_check=true"
],
"data-root": "/data/docker"
EOF
#要保持docker和kubelet cgroup一致
systemctl enable docker.service
systemctl start docker.service
# 配置镜像源
cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
#安装相关软件
yum install -y kubelet kubeadm kubectl --nogpgcheck
# 设置开机自启动
systemctl enable kubelet
systemctl start kubelet
三、 部署kubernetes集群
3.1 部署kubeadm(master节点执行)
# 初始化kubeadm
kubeadm init --kubernetes-version=1.23.3 --apiserver-advertise-address=10.0.213.157 --image-repository registry.aliyuncs.com/google_containers --service-cidr=10.1.0.0/16 --pod-network-cidr=10.2.0.0/16
[init] Using Kubernetes version: v1.23.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local sysmessage-mydb01] and IPs [10.1.0.1 10.0.213.157]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [localhost sysmessage-mydb01] and IPs [10.0.213.157 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [localhost sysmessage-mydb01] and IPs [10.0.213.157 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 6.003525 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.23" in namespace kube-system with the configuration for the kubelets in the cluster
NOTE: The "kubelet-config-1.23" naming of the kubelet ConfigMap is deprecated. Once the UnversionedKubeletConfigMap feature gate graduates to Beta the default name will become just "kubelet-config". Kubeadm upgrade will handle this transition transparently.
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node sysmessage-mydb01 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node sysmessage-mydb01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 13bqa9.ohrw3s09v53yks8p
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 10.0.213.157:6443 --token 13bqa9.ohrw3s09v53yks8p \\
--discovery-token-ca-cert-hash sha256:1a59bb40d2682bb6dc9c90c402d30de268eea76fe76e251a5c5cb0f575200354
export KUBECONFIG=/etc/kubernetes/admin.conf
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >>/etc/profile
[root@sysmessage-mydb01 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
sysmessage-mydb01 NotReady control-plane,master 2m10s v1.23.3
3.2 安装Pod网络插件
#kubectl apply -f https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml
Warning: policy/v1beta1 PodSecurityPolicy is deprecated in v1.21+, unavailable in v1.25+
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
wait...
# kubectl get node
NAME STATUS ROLES AGE VERSION
sysmessage-mydb01 Ready control-plane,master 8m34s v1.23.3
3.3 添加node节点(每个node节点执行)
kubeadm join 10.0.213.157:6443 --token 13bqa9.ohrw3s09v53yks8p --discovery-token-ca-cert-hash sha256:1a59bb40d2682bb6dc9c90c402d30de268eea76fe76e251a5c5cb0f575200354
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
#kubectl get node
NAME STATUS ROLES AGE VERSION
sysmessage-mydb01 Ready control-plane,master 135m v1.23.3
sysmessage-mydb02 Ready <none> 13m v1.23.3
sysmessage-sh05-mydb01 Ready <none> 72m v1.23.3
sysmessage-sh05-mydb02 Ready <none> 51s v1.23.3
四、 部署dashboard
kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v2.4.0/aio/deploy/recommended.yaml
kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system coredns-6d8c4cb4d-2nzbm 1/1 Running 0 136m
kube-system coredns-6d8c4cb4d-rqgxg 1/1 Running 0 136m
kube-system etcd-sysmessage-mydb01 1/1 Running 1 136m
kube-system kube-apiserver-sysmessage-mydb01 1/1 Running 1 136m
kube-system kube-controller-manager-sysmessage-mydb01 1/1 Running 1 136m
kube-system kube-flannel-ds-hjsbg 1/1 Running 0 14m
kube-system kube-flannel-ds-kdl24 1/1 Running 0 128m
kube-system kube-flannel-ds-knfzn 1/1 Running 1 83m
kube-system kube-flannel-ds-tn4jf 1/1 Running 0 2m15s
kube-system kube-proxy-4bffc 1/1 Running 0 2m15s
kube-system kube-proxy-5c2f9 1/1 Running 1 83m
kube-system kube-proxy-k9j9f 1/1 Running 1 14m
kube-system kube-proxy-tvb4r 1/1 Running 0 136m
kube-system kube-scheduler-sysmessage-mydb01 1/1 Running 1 136m
kubernetes-dashboard dashboard-metrics-scraper-799d786dbf-q4z44 1/1 Running 0 26s
kubernetes-dashboard kubernetes-dashboard-6b6b86c4c5-df2sb 1/1 Running 0 26s
以上是关于kubeadm方式部署k8s集群的主要内容，如果未能解决你的问题，请参考以下文章