请帮忙翻译一下（急用）

Posted 2023-05-17

COMBINING PARALLEL LIFTING AND RETIMING ARCHITECTURE FOR DISCRETE WAVELET TRANSFORM
ABSTRACT
The implementation based on lifting scheme of discrete wavelet transform has great advantages compared with that based on convolution. However, the critical path of the conventional lifting algorithm based implementation is potentially longer than that of convolution-based implementation. In this paper, an improved lifting algorithm for the (6,101 wavelet filters and its VLSI architecture are presented, in which parallelism of arithmetic operations in each lifting step is exploited, and a retiming technique is employed to optimize design. Compared with the other works reported in previous literature, the proposed architecture is a more efficient altemative in reducing critical path and hardware cost.
1.introduction
The discrete wavelet transform (DWT) is widely used in many areas, such as signal analysis and image compression etc. The DWT has been adopted to be an ingredient in many image compression standards, such as JPEG2000 [I], because it can decompose the signals into different subbands with both time and frequency information and facilitate to arrive a high compression ratio. Hardware implementation for the DWT is efficient to meet real-time. Recently, a number of works [2-81 have been reported that focus on reducing complexity and latency of the VLSI architecture for DWT. The implementation based on lifting
scheme of discrete wavelet transform has great advantages compared with that based on convolution [2]. However, the critical path of the conventional
lifting algorithm based implementation (CLABI) [4] is potentially longer than that of convolution-based implementation (CBI) [4]. Despite the delay can be reduced by employing pipeline technique 191, it wIll increase the complexity of hardware implementation. A reschedule technique was employed in [6] to increase working frequency. A flipping structure has
been presented in [SI to reduce efficiently the critical path with lower hardware complexity. In this paper, an improved lifting algorithm for the (6,iO) wavelet filters and its VLSI architecture are presented, in which parallelism of arithmetic operations in each lifting step is exploited, and a retiming technique is employed to optimize design. Compared with the other works reported in previous literature, the proposed architecture is a more efficient altemative in reducing critical path and hardware cost. The rest of the paper is organized as follows. In Section 2, a brief review for lifting scheme of discrete wavelet transform is described, followed by a new lifting scheme for the (6,lO) discrete wavelet filters is presented in Section 3. The proposed architectures for the (6,lO) wavelet filters are illustrated in Section 4. followed by the performance analysis and comparison with other designs. Conclusions for this paper are drawn in Section 5.
2. LIFTING SCHEME OF DWT
Lifting scheme is a new method to construct wavelet bases, which was first introduced by Sweldens in 1990s
[Z]. It was originally developed from the eartier work of Donoho to build the wavelet from interpolating scaling functions and the work of Lounsbery et al., which constructed the wavelet for a polyhedral surface. The main difference with such classical constructions as [2] and [3] is that it entirely relies on the spatial domain. Therefore, it is suitable for constructing wavelets that lack translation and dilation, and thus, the Fourier transform is no longer available.
有追加

结合平行的举和RETIMING建筑学为分离小波变换

实施根据分离小波举的计划变换有巨大好处和那相比根据卷积的摘要。 然而，常规举的算法基于实施的关键路程比那潜在地长基于卷积的实施。 在本文，一种被改进的举的算法为(提出6,101小波过滤器和它的VLSI建筑学，算术运算平行性在每举的步被利用，并且一个retiming的技术被使用优选设计。 比较其他工作在早先文学报告了，提出的建筑学是一更加高效率altemative在减少关键路程和硬件费用。

分离小波变换的1.introduction (DWT)是用途广泛在许多区域，例如信号分析和图像压分离小波变换(DWT)是用途广泛在许多区域，例如信号分析和图像压缩等。 因为它可能分解信号入不同的次能带以时间和频率信息和促进到达高压缩比， DWT在许多图像压缩标准被采取是一种成份，例如JPEG2000 [I]。 硬件实现为DWT是高效率见面实时。 最近，一定数量的工作[2-81在减少VLSI建筑学的复杂和潜在因素报告了那个焦点为DWT。 根据分离小波举的计划
的实施变换有巨大好处比较根据卷积的那[2]。 然而，常规举的算法基于实施
(CLABI) [4的]关键路程比那潜在地长基于卷积的实施(CBI) [4]。 尽管延迟可以被使用管道技术减少191，它将增加硬件实现的复杂。 重新编排技术被使用[6]增加运作的频率。 提出了一个
翻转的结构[高效率地减少关键路程的SI以更低的硬件复杂。 在本文，一种被改进的举的算法为(6， iO)小波过滤器和它的VLSI建筑学被提出，算术运算平行性在每举的步被利用，并且一个retiming的技术被使用优选设计。 比较在早先文学报告的其他工作，提出的建筑学是一更加高效率altemative在减少关键路程和硬件费用。 本文的其余如下被组织。在第2部分，简要的回顾为分离小波举的计划在第3部分变换由一份新的举的计划描述，跟随为(6， lO)分离小波过滤器被提出。 提出的建筑学为(6， lO)小波过滤器在第4部分被说明。 由性能分析和比较跟随与其他设计。 结论为本文在第5部分被总结。
问题补充：2.DWT举的计划举的计划是修建小波基地的一个新的方法，由Sweldens在90年代。
[Z]首先介绍。 它从Donoho eartier工作最初被开发修造小波从等内插结垢作用和Lounsbery工作，修建小波为polyhedral表面。 主要区别与这样古典建筑象[2]和[3]是它整个地依靠空间领域。 所以，它为修建缺乏翻译和扩张的小波是适当的，并且因而，傅立叶变换不再是可利用的。 参考技术A 结合并行的起吊和定时结构的离散小波变换
摘要
实施基于提升计划的离散小波变换有很大的优势相比，与基于卷积。但是，关键路径的传统的基于提升算法的执行是有潜在长于卷积为基础的执行情况。在这方面的文件，提出了一种改进提升算法为（ 6101小波滤波器及其VLSI结构介绍，在这种并行算术运算，在每一个步骤是取消剥削，并定时技术是受聘的优化设计。相比，与其他工程的报道在过去的文献，建议建筑是一个更有效率的altemative在减少关键路径和硬件成本。
1.introduction
离散小波变换（ DWT ）是广泛使用在许多领域，如信号分析和图像压缩等载重吨已通过成为一个成分，在许多图像压缩标准，如JPEG2000的[一] ，因为它可以分解信号分成不同的子带都与时间和频率的信息和方便到达的高压缩比。硬件实现，为载重吨，是有效率，以满足实时时间。最近，一些工程[ 2-81已报告说，重点是减少复杂性和潜伏期的VLSI结构载重吨。实施基于提升
计划离散小波变换有很大的优势相比，与基于卷积[ 2 ] 。但是，关键路径的传统
基于提升算法的执行情况（ clabi ） [ 4 ]是有潜在长于卷积为基础的执行情况（工业联盟） [ 4 ] 。尽管延误可减少雇用管道技术191 ，它会增加复杂的硬件实现。一改技术，受聘于[ 6 ] ，以增加工作频率。一翻开结构
已提交的在[硅，以减少有效的关键路径与较低的硬件复杂度。在这方面的文件，提出了一种改进提升算法为（ 6 ，印务局）小波滤波器及其VLSI结构介绍，在这种并行算术运算，在每一个步骤是取消剥削，并定时技术是受聘的优化设计。相比，与其他工程的报道，在过去的文献，建议建筑是一个更有效率的altemative在减少关键路径和硬件成本。其余的文件，是有组织如下。在第2条中，简要回顾了取消计划的离散小波变换的描述，其次是一种新的提升方案为（ 6 ，卢）离散小波过滤器是在第3 。建议的架构为（ 6 ，卢）小波滤波器，说明在第4节。其次是性能分析和比较，与其他的设计。结论本文得出在第5 。
取消计划载重吨
取消计划是一个新的方法构建小波基地，这是首次推出的sweldens在20世纪90年代
[ z ] 。它本来是发达国家从eartier工作donoho建设小波从插值尺度的职能和工作lounsbery等人，其中兴建小波一个多面体的表面。主要区别与这种古典建筑，作为[ 2 ] [ 3 ]是，它完全依赖于空间域。因此，这是适合建设小波缺乏翻译和扩张，因此，傅立叶变换是不再可用。 参考技术B This scheme is called the second-generation wavelets. Obviously, it can be used to build first-generation wavelets and leads to a faster, full in-place implementation of the wavelet transform. The basic idea behind the lifting scheme is a relationship among all biorthogonal wavelets that share the same scaling function such that one can construct the desired wavelet from a simple one. Daubechies and Sweldens proved [3] that any wavelet with FIR filters can be factorized into a finite number of alternating lifting and dual lifting steps starting from the Lazy wavelet. This implies that any wavelet can be derived from arbitrary wavelet, including the Lazy wavelet, by a finite number of lifting and dual lifting.
The main feature of the lifting-based DWT scheme is to break up the high-pass and low-pass filters into a sequence of upper and lower triangular matrices and convert the filter implementation into banded matrix
multiplications [ 3 ] . Such a scheme has several advantages, including "in-place'' computation of DWT,
integer-to-integer wavelet (IWT), symmetric forward and inverse transform etc. Therefore, it comes as no surprise that lifting has been chosen in the new still image compression standard JPEG2000 [ 1].

Let h(z) and g(z) denote the low-pass and high-pass analysis filters, h(z) and g(z) the low-pass
and high-pass synthesis filters, respectively, then the corresponding decomposition and reconstruction
poIyphase matrices, denoted as p(z) and p(z) , respectively, are defined as follows:
[图]（略）
where he(z) and ge(z) [ho(z) and go(z)] represent the even parts [odd parts] of the Iowpass and highpass wavelet filters, respectively. It has been shown in [2] and [3] that if the h(z) and g(z) are a pair of complementary filters for each other, then the p(z)is always factorized by lifting
scheme as follows [3]:
[图]（略）
in which K is a constant, ;i(z)and s ; ( z ) are denoted as primary lifting and dual lifting polynomial (or vice versa) respectively, and m represents the total lifting steps required.
3. NEW LIFTING SCHEME
The polyphase matrix of the (6,lO) filter can be decomposed as (3) [SI.
[图]（略）
where a, b, c, d, e, f; K2, K, are the corresponding lifting coefficients and scale normalization coefficients,
respectively, which can be referred to [I]. From (1), the parallel-based lifting scheme for forward transform of (6,lO) filter can be obtained as (4):
[图]（略）
We use x[n] to represent the original input sequence, and x[Zn] (x[2n+ I]) to represent even (odd) indexed samples, the intermediate values computed during lifting are denoted as &"'[n] and L'")[n] (m=Z,2), and the lowand high- frequency coefficients are expressed as the sequence L[n] and H[n], respectively. Hence, from (2), the implementation of forward transform for (6, IO) filter can be written as (3) by using mathematical notations.
[图]（略）
4. PROPOSED ARCHITECTURE
From (3), the flow diagram of lifting-based architecture for the (6,lO) filter can be proposed as shown in Fig.1, in which the critical path is calculated as (4T, + U,). While according to (5), The flow diagram of a VLSI architecture based on the proposed PLS (named as PLSAj for the (6,lO)
DWT is illustrated as shown in Fig.Z(a). It can be calculated that the critical path latency of the proposed
PLSA is (T,,, + 4T,) if only the order of addition operations is optimized. The critical path of the architecture shown in Fig.l(a) can be further reduced by pipelining. The proposed PLSA with 2 stages of pipeline denoted as dot lines is shown in Fig.2(b), in which 4 additional pipeline registers are used and the critical path is reduced from (T', + 4T0) to (T, + ZT,). The proposed PLSA with 5 stages of pipeline is shown in Fig.Z(c), in which 11 additional pipeline registers are used and the critical path is reduced to T,. The total number of registers required can be efficiently reduced if the retiming technique is employed. Equations (5a)-(5d) can be rewritten as (6a)-(6d) if retiming is employed. Following (6), a PLS-based architecture combining retiming and 5 stages of pipeline for the (6,lO) 1-D DWT can be proposed as shown in
Fig.2(d). Compared with the architecture shown in Fig.2(c), the total number of register required is reduced from I5 to 14. Performance comparison for the architectures of the (6,iO) filter is illustrated in Table 1. Comparison results demonstrate the PLS-based architectures gains better performance than the flipping structure in the case of (6,lO) filter chosen, and the later is a special case of PLSA
[图]（略）
[图]（略）
Fig.2 Proposed PLS-based architecture (PLSA) of (6,lO) 1-D DWT. (a) PLSA without pipeline, (b) PLSA with 2 stages of pipeline, (c) PLSA with 5 stages of pipeline, (d) PLSA with combining retiming and 5 stages of pipeline

TABLE 1
PERFORMANCE COMPARISON OF ARCHITECTURES FOR
THE (6,lO) I-D DWT
[图]（略）
5. CONCLUSIONS
A modified lifting algorithm for the (6,lO) wavelet filters, as well as the fast VLSI architectures, have been proposed, in which parallelism of arithmetic operations in each lifting step is exploited, and a retiming technique is employed to optimize design. Compared with the previous lifting-based designs, the new implementations is a more efficient altemative in reducing critical path and hardware cost.
郁闷，一次还发不完。本回答被提问者采纳

中-》英，帮翻译下，thanks，急用

Ppt
一..FLOWER SHOU
我的名字学号之类的
二．Sponsor:xx行业协会
Organizer：123 International Expo Co，。Ltd
Co-organizer:xx公司
Supporters：xx公司
1-3 May 2009
SNIES
三.展会的创意
此次展会不仅有各种花各样的鲜花及盆栽艺术。还首次推出了剪纸等手工艺制作及插花艺术展区。
四，市场信息分析
1. 环境的破坏使许多的珍贵花草消失了。
2. 人们的收入和生活水平都提高了，相应的生活质量也在不短的提高，鲜花作为一个装饰和环保的产品，越来越多的收到人们的关注。
3. 鲜花市场越来越多和规范化
五．基本情况
时间-2009年5月1-3号
地点：SNIES
展区；w1-w3 鲜花展区
W4手工艺展区
布展时间：2009年4月29-30
撤展时间：2009年5月3日下午4；30分到五月4号
六：定价和预算
区域 标准展位 室内光地
外贸 A区 Us ￥（ 美元符号）2，600/9m2 Us ￥（美元符号）260/m2
内资 A区 RMB 10,800/9M2 RMB 1,080/m2
B区 RMB 8,800/9M2(M的平方) RMB 880/m2
展会前：20万元RMB
展会中：10万RMB
展会后：4万
七：人员安排：
总负责：总经理
招展：项目经理
现场活动和赞助：市场部经理
服务商和总务：总经理助理
八．进度计划
2008年11月到2009年3月招展和做宣传
2009年2月份：媒体合作和赞助，及确定服务商
2009年四月宣传，邀请观众，安排各项活动
2009年五月。展后跟踪
九服务供应商
2009年1月份联系运输商，搭建商和现场服务商。
2009年2月确定
十，展后跟踪
展后一周安排展会旅游
展会后两周电话回访和市场调查
十一
现场管理
南大厅和北大厅各设办公室一个。每个馆设服务台（问寻处）一个
没人保持电话联系的到
十二
THANKS!
名字，学号，时间

把中文都译成英文，急用，谢了，我还要做成ppt，机器就不用来了，我看得出来
你们很强，两个一样，谁抄谁的呢？

1. FLOWER SHOU
My name, student ID, etc
2. Sponsor:xx industry association
Organizer：123 International Expo Co，。Ltd
Co-organizer:xx company
Supporters：xx company
1-3 May 2009
SNIES
3. Purpose of Exibit
This show not only exibits various flowers and banzai arts, also promotes for the first time a district of the arts and handcrafts of paper cutting and flower arrangements.

4. Market Information and Research Analysis
1) The damage to the environment has caused many extinction of plants.
2) With increase of people's income and level of lifestyle, the quality of living has accordingly improved as well. Living flowers have attracted more and more attention and likings as a decorative and environment friendly product.
3) The expansion and standards of flower and floral markets

5. Ground and basic information
Date: May 1, 2009 through May 3, 2009
Venue: SNIES
Exibition Areas；w1-w3 Floral Show
W4 Handcrafts Show
Time of Preparation：April 29 and 30, 2009
Allowed Period to disassemble show booths：Starting at 4:30PM, May 3, 2009, ending on May 4, 2009

6. Pricing and Budgeting
Region Standard Show Booth Indoor Floor Space
International/Foreign Tradings Area A US$2，600/9m2 US$260/m2
Domestic Invested Area A RMB 10,800/9M2 RMB 1,080/m2
Area B RMB 8,800/9M2(M的平方) RMB 880/m2

Prior to Exibition：200,000RMB
During Exibition: 100,000RMB
Post Exibition：40,000RMB

7. Accountable Personnel
Director：General Manager
Recruitment of Exibitors：Project Manager
Activities and Sponsorship：Marketing Department Manager
Service Operator and General Operation：Assistant to General Manager

8. Progressive Planning
November 2008 - March 2009: Recuitment and promotion of the Exibition
February 2009：Media collaboration and sponsorship, confirmation of service operators
April 2009: Marketing and promoting，send out audience and guests invitation, plan and arrange various events
May 2009: Post show follow ups

9. Service Operators and Providers
January 2009: contact and recruite service providers for freights, construction and on-site services
February 2009: confirmation of above

10. Post Show Follow Up
One week post show: Arrangement of leisure tours and trips
Two weeks post show: Telephone follow up and marketing survey

11. On-Site Management
Offices will be set up in South lobby and North lobby; Reception and Help Desk at each function room.

12.
THANKS!

Name, Student ID, Date 参考技术A Ppt
A .. FLOWER SHOU
My name school, like
二. Sponsor: xx Industry Association
Organizer: 123 International Expo Co,. Ltd
Co-organizer: xx Inc.
Supporters: xx Inc.
1-3 May 2009
SNIES
III. Exhibition of creativity
The exhibition is not only a variety of flowers and potted flowers on a wide range of art. For the first time introduced the production of handicrafts, such as paper-cutting art exhibition and flower arranging.
Fourth, market information and analysis
1. Damage to the environment so that many precious flowers disappeared.
2. People's incomes and living standards have improved, the quality of life is less than the increase in flowers as a decorative and environmentally friendly products, received more and more attention.
3. Flower market and an increasing number of standardized
五. Basic information
-2009 Time in May, 1-3
Location: SNIES
Pavilion; w1-w3 flowers Pavilion
W4 handicraft exhibition
As far as the exhibit: April 2009 29-30
Dismantling Time: May 3, 2009 at 4; 30 share on May 4
VI: Pricing and Budget
Regional indoor standard booths and light
A foreign trade zone ￥ Us (dollar sign) 2,600 / 9m2 Us U.S. (dollar sign) 260/m2
A district capital RMB 10,800 / 9M2 RMB 1,080 / m2
B district RMB 8,800 / 9M2 (M squared) RMB 880/m2
Before the show: 200,000 yuan RMB
Exhibition: 100,000 RMB
After the show: 40,000
Seven: Staff:
General in charge: General Manager
The breeze: Project Manager
On-site activities and sponsors: Marketing Manager
And the General Service: Assistant General Manager
VIII. Progress of the plan
In November 2008 to March 2009 and the breeze publicity
February 2009: Media and co-sponsors, and service providers to identify
Publicity in April 2009, invited the audience to arrange activities
In May 2009. After the show to track
Nine service providers
January 2009 transport links, and to build on-site service provider.
In February 2009 to determine
10, after the show to track
Show one week after the travel arrangements for the show
After a two-week exhibition and return telephone market research
11
On-site management
South Hall and North Hall, each with an Office. Museum set up in each desk (look for Office to ask) a
No one telephone contact to the
12
THANKS!
Names, places, times 参考技术B III. Exhibition of creativity
The exhibition is not only a variety of flowers and potted flowers on a wide range of art. For the first time introduced the production of handicrafts, such as paper-cutting art exhibition and flower arranging.
Fourth, market information and analysis
1. Damage to the environment so that many precious flowers disappeared.
2. People's incomes and living standards have improved, the quality of life is less than the increase in flowers as a decorative and environmentally friendly products, received more and more attention.
3. Flower market and an increasing number of standardized
五. Basic information
-2009 Time in May, 1-3
Location: SNIES
Pavilion; w1-w3 flowers Pavilion
W4 handicraft exhibition
As far as the exhibit: April 2009 29-30
Dismantling Time: May 3, 2009 at 4; 30 share on May 4
VI: Pricing and Budget
Regional indoor standard booths and light
A foreign trade zone ￥ Us (dollar sign) 2,600 / 9m2 Us U.S. (dollar sign) 260/m2
A district capital RMB 10,800 / 9M2 RMB 1,080 / m2
B district RMB 8,800 / 9M2 (M squared) RMB 880/m2
Before the show: 200,000 yuan RMB
Exhibition: 100,000 RMB
After the show: 40,000
Seven: Staff:
General in charge: General Manager
The breeze: Project Manager
On-site activities and sponsors: Marketing Manager
And the General Service: Assistant General Manager
VIII. Progress of the plan
In November 2008 to March 2009 and the breeze publicity
February 2009: Media and co-sponsors, and service providers to identify
Publicity in April 2009, invited the audience to arrange activities
In May 2009. After the show to track
Nine service providers
January 2009 transport links, and to build on-site service provider.
In February 2009 to determine
10, after the show to track
Show one week after the travel arrangements for the show
After a two-week exhibition and return telephone market research
11
On-site management
South Hall and North Hall, each with an Office. Museum set up in each desk (look for Office to ask) a
No one telephone contact to the
12
THANKS!
Names, places, times 参考技术C III. Exhibition of creativity
The exhibition is not only a variety of flowers and potted flowers on a wide range of art. For the first time introduced the production of handicrafts, such as paper-cutting art exhibition and flower arranging.
Fourth, market information and analysis
1. Damage to the environment so that many precious flowers disappeared.
2. People's incomes and living standards have improved, the quality of life is less than the increase in flowers as a decorative and environmentally friendly products, received more and more attention.
3. Flower market and an increasing number of standardized
五. Basic information
-2009 Time in May, 1-3
Location: SNIES
Pavilion; w1-w3 flowers Pavilion
W4 handicraft exhibition
As far as the exhibit: April 2009 29-30
Dismantling Time: May 3, 2009 at 4; 30 share on May 4
VI: Pricing and Budget
Regional indoor standard booths and light
A foreign trade zone ￥ Us (dollar sign) 2,600 / 9m2 Us U.S. (dollar sign) 260/m2
A district capital RMB 10,800 / 9M2 RMB 1,080 / m2
B district RMB 8,800 / 9M2 (M squared) RMB 880/m2
Before the show: 200,000 yuan RMB
Exhibition: 100,000 RMB
After the show: 40,000
Seven: Staff:
General in charge: General Manager
The breeze: Project Manager
On-site activities and sponsors: Marketing Manager
And the General Service: Assistant General Manager
VIII. Progress of the plan
In November 2008 to March 2009 and the breeze publicity
February 2009: Media and co-sponsors, and service providers to identify
Publicity in April 2009, invited the audience to arrange activities
In May 2009. After the show to track
Nine service providers
January 2009 transport links, and to build on-site service provider.
In February 2009 to determine
10, after the show to track
Show one week after the travel arrangements for the show
After a two-week exhibition and return telephone market research
11
On-site management
South Hall and North Hall, each with an Office. Museum set up in each desk (look for Office to ask) a
No one telephone contact to the
12
THANKS! 参考技术D 看来我的最好了啊，我找我们公司的英语八级的女生帮你翻译的，不要忘记了，人家可是专业翻译哦，有事情找我吧
[img]http://wpa.qq.com/pa?p=1:357208848:11[/img][url=http://sighttp.qq.com/cgi-bin/check?sigkey=6cb29444853799dd5f3ed4bdd77f76e9f68ffa3f718c979716e9ad1765ae7276]点击这里给我发消息[/url]

III. Exhibition of creativity
The exhibition is not only a variety of flowers and potted flowers on a wide range of art. For the first time introduced the production of handicrafts, such as paper-cutting art exhibition and flower arranging.
Fourth, market information and analysis
1. Damage to the environment so that many precious flowers disappeared.
2. People's incomes and living standards have improved, the quality of life is less than the increase in flowers as a decorative and environmentally friendly products, received more and more attention.
3. Flower market and an increasing number of standardized
五. Basic information
-2009 Time in May, 1-3
Location: SNIES
Pavilion; w1-w3 flowers Pavilion
W4 handicraft exhibition
As far as the exhibit: April 2009 29-30
Dismantling Time: May 3, 2009 at 4; 30 share on May 4
VI: Pricing and Budget
Regional indoor standard booths and light
A foreign trade zone ￥ Us (dollar sign) 2,600 / 9m2 Us U.S. (dollar sign) 260/m2
A district capital RMB 10,800 / 9M2 RMB 1,080 / m2
B district RMB 8,800 / 9M2 (M squared) RMB 880/m2
Before the show: 200,000 yuan RMB
Exhibition: 100,000 RMB
After the show: 40,000
Seven: Staff:
General in charge: General Manager
The breeze: Project Manager
On-site activities and sponsors: Marketing Manager
And the General Service: Assistant General Manager
VIII. Progress of the plan
In November 2008 to March 2009 and the breeze publicity
February 2009: Media and co-sponsors, and service providers to identify
Publicity in April 2009, invited the audience to arrange activities
In May 2009. After the show to track
Nine service providers
January 2009 transport links, and to build on-site service provider.
In February 2009 to determine
10, after the show to track
Show one week after the travel arrangements for the show
After a two-week exhibition and return telephone market research。
11. On-Site Management
Offices will be set up in South lobby and North lobby; Reception and Help Desk at each function room