Nagios监控nginx服务具体过程

Posted jhcelue

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了Nagios监控nginx服务具体过程相关的知识，希望对你有一定的参考价值。

1在nginx 服务器上安装nrpe客户端：

Nginx的服务须要监控起来。不然万一down了而不及时修复，会影响web应用。例如以下web应用上面启动的nginx后台进程
[[email protected] ~]# ps aux|grep nginx
nobody   15294  0.0  0.0  22432  3464 ?        S    Jul03   0:05 nginx: worker process      
nobody   15295  0.0  0.0  22432  3480 ?        S    Jul03   0:05 nginx: worker process      
......      
nobody   15316  0.0  0.0  22432  3468 ?

       S    Jul03   0:05 nginx: worker process      
nobody   15317  0.0  0.0  22432  3480 ?        S    Jul03   0:05 nginx: worker process      
root     16260  0.0  0.0  20584  1684 ?        Ss   Jun18   0:00 nginx: master process /usr/local/nginx/sbin/nginx
root     21211  0.0  0.0 103252   860 pts/1    S+   17:50   0:00 grep nginx

1.1，rpm方式安装nrpe客户端

下载地址：http://download.csdn.net/detail/mchdba/7493875

[[email protected] nagios]# ll

总计 768

-rw-r--r-- 1 root root 713389 12-16 12:08 nagios-plugins-1.4.11-1.x86_64.rpm

-rw-r--r-- 1 root root  32706 12-16 12:09 nrpe-2.12-1.x86_64.rpm

-rw-r--r-- 1 root root  18997 12-16 12:08 nrpe-plugin-2.12-1.x86_64.rpm

[[email protected] nagios]# rpm -ivh *.rpm --nodeps  --force

 

1.2 在配置文件最末尾，加入配置信息以及监控主机服务器ip地址

[[email protected] localhost nagios]# vim /etc/nagios/nrpe.cfg

# add by tim on 2014-06-11

command[check_users]=/usr/local/nagios/libexec/check_users -w 8 -c 15

command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20

command[check_sda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sda

command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z

#command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 50 -c 80

command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 750 -c 800

command[check-host-alive]=/usr/local/nagios/libexec/check_ping -H 10.xx.3.29 -w 3000.0,80% -c 5000.0,100% -p 5

allowed_hosts = 127.0.0.1,10.xx.3.41

check下命令是否生效：

[[email protected] nrpe-2.15]# /usr/local/nagios/libexec/check_users -w 8 -c 15

USERS OK - 2 users currently logged in |users=2;8;15;0

[[email protected] nrpe-2.15]#

看到已经USERS OK -….命令已经生效。

 

1.3 启动nrpe报错例如以下：

[[email protected] ~]# service nrpe restart

Shutting down nrpe:                                        [失败]

Starting nrpe: /usr/sbin/nrpe: error while loading shared libraries: libssl.so.6: cannot open shared object file: No such file or directory

                                                           [失败]

[[email protected] ~]#

[[email protected] nagios_client]# service nrpe start

Starting nrpe: /usr/sbin/nrpe: error while loading shared libraries: libssl.so.6: cannot open shared object file: No such file or directory

                                                           [失败]

[[email protected] nagios_client]#

建立连接

[[email protected] nagios_client]# ln -s /usr/lib64/libssl.so /usr/lib64/libssl.so.6

 (假设没有libssl.so，就採用别的libssl.so.10来做软连接，ln -s /usr/lib64/libssl.so.10 /usr/lib64/libssl.so.6)

[[email protected] nagios_client]#

再又一次启动例如以下：

[[email protected] nagios_client]# service nrpe start

Starting nrpe: /usr/sbin/nrpe: error while loading shared libraries: libcrypto.so.6: cannot open shared object file: No such file or directory

                                                           [失败]

[[email protected] ~]# ll /usr/lib64/libcrypto.so

lrwxrwxrwx. 1 root root 18 10月 13 2013 /usr/lib64/libcrypto.so -> libcrypto.so.1.0.0

[[email protected] nagios_client]#

再建链接：
[[email protected] nagios_client]# ln -s /usr/lib64/libcrypto.so /usr/lib64/libcrypto.so.6

(或者假设没有libcrypto.so，就採用libcrypto.so.10做软连接， ln -s /usr/lib64/libcrypto.so.10 /usr/lib64/libcrypto.so.6)

[[email protected] nagios_client]# service nrpe start

Starting nrpe:                                             [确定]

[[email protected] nagios_client]#

 

1.4 检測下nrpe是否正常执行：

去nagios服务器端check下

[[email protected] ~]#  /usr/local/nagios/libexec/check_nrpe -H 10.xx.3.xx

NRPE v2.12

[[email protected] ~]#

看到返回NRPE v2.15表示已经连接成功，客户端的nrpe服务已经监控完毕。

 

2，比較简单的通过check_http的方式监控

能够在/etc/nagios/nrpe.cfg里面採用check_http的方式来获取nginx是否执行：

(1)     编辑nrpe.cfg

Vim /etc/nagios/nrpe.cfg

command[check_nginx_status]=/usr/lib/nagios/plugins/check_http -I localhost -p 80 -u /nginx_status -e 200 -w 3 -c 10

(2)     重新启动nrpe服务

[[email protected] ~]# service nrpe restart

Shutting down nrpe:                                        [确定]

Starting nrpe:                                             [确定]

[[email protected] ~]#

(3)     在nagios服务器端check。成功。

[[email protected] ~]# /usr/local/nagios/libexec/check_nrpe -H10.xx.1.22 -c check_nginx_status

HTTP OK HTTP/1.1 200 OK - 254 bytes in 0.002 seconds |time=0.002031s;3.000000;10.000000;0.000000 size=254B;;;0

(4)     在services.cfg里面加入check_nginx_status服务

define service{

        host_name               lb-net-2

        service_description     check_nginx_status

        check_command           check_nrpe!check_nginx_status

        max_check_attempts      5

        normal_check_interval   3

        retry_check_interval    2

        check_period            24x7

        notification_interval   10

        notification_period     24x7

        notification_options    w,u,c,r

        contact_groups          opsweb

        }

(5)     在command.cfg加入check_nginx_status服务

define command{

        command_name    check_nginx_status

        command_line    $USER1$/check_nginx_status -I $HOSTADDRESS$ -w $Warning$ -c $Cri$

        }

(6)     又一次载入nagios

[[email protected] objects]# service nagios reload

Running configuration check...

Reloading nagios configuration...

done

[[email protected] objects]#

(7)     查看界面的nginx监控服务。例如以下所看到的：

 技术分享

3 编写脚本来监控nginx服务

3.1 调试具体经过

[[email protected] run]# find / -name nginx.pid

/usr/local/nginx/logs/nginx.pid

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -n /usr/local/nginx/logs/nginx.pid -s nginx_status -o /tmp/ -w 1500 -c 2000

expr: 參数数目错误

expr: 语法错误

(standard_in) 1: syntax error

/usr/lib/nagios/plugins/check_nginxstatus: line 258: [: : integer expression expected

/usr/lib/nagios/plugins/check_nginxstatus: line 262: [: : integer expression expected

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

 

去查看262行。将逻辑运算符  "-a" 改成 "&&"

[[email protected] run]# vim /usr/lib/nagios/plugins/check_nginxstatus

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -n /usr/local/nginx/logs/nginx.pid -s nginx_status -o /tmp/ -w 1500 -c 2000

expr: 參数数目错误

expr: 语法错误

(standard_in) 1: syntax error

/usr/lib/nagios/plugins/check_nginxstatus: line 258: [: missing `]‘

/usr/lib/nagios/plugins/check_nginxstatus: line 262: [: : integer expression expected

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

[[email protected] run]#

看到已经OK了。再改动文件。

 

[[email protected] run]# vim /usr/lib/nagios/plugins/check_nginxstatus

[[email protected] run]#

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -n /usr/local/nginx/logs/nginx.pid -s nginx_status -o /tmp/ -w 1500 -c 2000

expr: 參数数目错误

expr: 语法错误

(standard_in) 1: syntax error

/usr/lib/nagios/plugins/check_nginxstatus: line 258: [: missing `]‘

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

[[email protected] run]#

将[]改成使用"[[]]"。 就可以！

 

[[email protected] run]# vim /usr/lib/nagios/plugins/check_nginxstatus

[[email protected] run]#

[[email protected] run]#

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -n /usr/local/nginx/logs/nginx.pid -s nginx_status -o /tmp/ -w 1500 -c 2000

expr: 參数数目错误

expr: 语法错误

(standard_in) 1: syntax error

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

[[email protected] run]#

 

凝视掉#reqpcon=`echo "scale=2; $reqpsec / $conpsec" | bc -l`之后。就不会报(standard_in) 1: syntax error错误，例如以下所看到的：

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -s nginx_status -n nginx.pid -w 15000 -c 20000

expr: 參数数目错误

expr: 语法错误

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

[[email protected] run]#

 

凝视掉# reqpsec=`expr $tmp2_reqpsec - $tmp1_reqpsec` 就不会再报 expr: 參数数目错误，例如以下所看到的：

报错：

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -s nginx_status -n nginx.pid -w 15000 -c 20000

expr: 语法错误

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

 

再次凝视掉 #reqpcon=`echo "scale=2; $reqpsec / $conpsec" | bc -l` 后。执行不会报expr: 语法错误。例如以下所看到的：

[[email protected] run]# /usr/lib/nagios/plugins/check_nginxstatus -H localhost -P 80 -p /usr/local/nginx/logs/ -s nginx_status -n nginx.pid -w 15000 -c 20000

OK - nginx is running.  requests per second,  connections per second ( requests per connection) | ‘reqpsec‘= ‘conpsec‘= ‘conpreq‘= ]

[[email protected] run]#

 

看到这里发现‘reqpsec‘= ‘conpsec‘= ‘conpreq‘=都没有值，可是nginx又是在启动执行着，问题出在哪里？经过排查，原来是nginx_status服务没有启动。须要在/usr/local/nginx/conf/nginx.conf配置文件中面加入例如以下配置：

# 加入pid參数

pid        logs/nginx.pid;

#charset koi8-r;

        access_log  logs/host.access.log  main;

        location /nginx_status {

                stub_status on;

                access_log   off;

                                     deny all;

         }

 

然后又一次载入nginx，看到新的nginx-status文件是生成了。可是文件内容为空，例如以下所看到的：

[[email protected] logs]# ll /tmp/nginx*

-rw-r--r--. 1 root root 0 7月   3 15:06 /tmp/nginx-status.1

[[email protected] logs]#

 

去查看ngins后台日志

[[email protected] logs]# cd /usr/local/nginx/

[[email protected] logs]# tail -n 300 error.log

……

2014/07/03 15:05:47 [error] 4285#0: *1851293 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

2014/07/03 15:05:48 [error] 4285#0: *1851294 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

2014/07/03 15:06:12 [error] 4282#0: *1851362 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

2014/07/03 15:06:13 [error] 4282#0: *1851363 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

2014/07/03 15:06:55 [error] 4285#0: *1851509 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

2014/07/03 15:06:56 [error] 4285#0: *1851519 access forbidden by rule, client: 127.0.0.1, server: localhost, request: "GET /nginx_status HTTP/1.0", host: "localhost"

 

查看nginx编译參数

[[email protected] logs]# /usr/local/nginx/sbin/nginx -V

nginx version: nginx/1.4.2

built by gcc 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC)

configure arguments: --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_realip_module

 

证明白实是载入了stub_status插件，之后去改动配置文件。凝视掉deny all;又一次载入nginx。

[[email protected] logs]# vim /usr/local/nginx/conf/nginx.conf

#deny all;

[[email protected] logs]# service nginx reload

reload nginx

[[email protected] logs]#

[[email protected] logs]# ll /tmp/nginx*

ls: 无法訪问/tmp/nginx*: 没有那个文件或文件夹

[[email protected] logs]#

还是没有看到/tmp/nginx-status.1状态文件生成。因为nagios下监控nginx的脚本是从nginx-status.1获取数据，假设没有这个文件，没有办法获取数据。

 

继续google，”nginx stub_status没有生成nginx-status.1”文件。看到有人说仅仅要配置好了这个状态文件有没有无所谓，我就试着直接执行脚本看看是否能生效。

[[email protected] logs]# ll /tmp/nginx*

ls: 无法訪问/tmp/nginx*: 没有那个文件或文件夹

[[email protected] logs]# /root/check_nginx2.sh  -H localhost -P 80 -p /usr/local/nginx/logs/ -n nginx.pid -s nginx_status -w 15000 -c 20000

OK - nginx is running. 1 requests per second, 2 connections per second (.50 requests per connection) | ‘reqpsec‘=1 ‘conpsec‘=2 ‘conpreq‘=.50 ]

[[email protected] logs]#

看到‘reqpsec‘=1 ‘conpsec‘=2 ‘conpreq‘=.50里面有数据了，再去check下文件有没有生成，例如以下所看到的：

[[email protected] logs]# ll /tmp/nginx*

ls: 无法訪问/tmp/nginx*: 没有那个文件或文件夹

[[email protected] logs]#

还是没有文件生成，可是check已经有数据了，证明不一定要拘泥于是否在/tmp/文件夹下是否有nginx-status.1文件。

通过脚本分析例如以下：

[[email protected] logs]# vim /usr/lib/nagios/plugins/check_nginxstatus

180 get_status() {

181     if [ "$secure" = 1 ]

182     then

183         wget_opts="-O- -q -t 3 -T 3 --no-check-certificate"

184         out1=`wget ${wget_opts} http://${hostname}:${port}/${status_page}`

185         sleep 1

186         out2=`wget ${wget_opts} http://${hostname}:${port}/${status_page}`

187     else

188         wget_opts="-O- -q -t 3 -T 3"

189         out1=`wget ${wget_opts} http://${hostname}:${port}/${status_page}`

190         sleep 1

191         out2=`wget ${wget_opts} http://${hostname}:${port}/${status_page}`

192     fi

193

194     if [ -z "$out1" -o -z "$out2" ]

195     then

196         echo "UNKNOWN - Local copy/copies of $status_page is empty."

197         exit $ST_UK

198     fi

199 }

 

是通过訪问`wget -O- -q -t 3 -T 3 --no-check-certificate http://10.xx.xx.xx:80/nginx_status`这个链接来获取status的数据记录的，而不是去载入/tmp/nginx-status.1文件来获取数据的。

直接訪问 http://10.xx.xx.xx:80/nginx_status 地址就能获取nginx执行数据，例如以下图所看到的：
技术分享

在nagios服务器上check下。报错：

[[email protected] ~]# /usr/local/nagios/libexec/check_nrpe -H10.xx.xx.xx -c check_nginx_status

UNKNOWN - Local copy/copies of nginx_status is empty.

[[email protected] ~]#

检查监控脚本，搜索 ‘Local copy/copies of nginx_status is empty.’在第197行，有例如以下代码：

195     if [ -z "$out1" -o -z "$out2" ]

196     then

197         echo "UNKNOWN - Local copy/copies of $status_page is empty."

198         exit $ST_UK

199     fi

看出是因为if [ -z "$out1" -o -z "$out2" ]这个推断生效。导致监控脚本执行到这里就exit了。继续调试。发现用nagios服务器调用脚本的时候。执行到下面第190行到第192行

out1=`/usr/bin/wget ${wget_opts} http://${hostname}:${port}/${status_page}`

        sleep 1

        out2=`/usr/bin/wget ${wget_opts} http://${hostname}:${port}/${status_page}`

的时候。out1为空，out2也为空，所以在后面的if [ -z "$out1" -o -z "$out2" ]推断通过报出信息为：UNKNOWN - Local copy/copies of $status_page is empty. 然后直接exit。

 

说明：因为nginx是要调用wget命令来获取nginx_status状态的，而wget命令是仅仅能以root用户来执行的, 所以须要将nagios用户设置成能够无需password直接su成root，这样就能以nagios用户执行命令sudo /usr/lib/nagios/plugins/check_nginxstatus 。在centos系统中。无法直接调用sudo命令，须要改动/etc/sudoers, 找到 #Defaults requiretty 并取消凝视，另外新增一行。表示nagios用户不须要登陆终端就能够调用命令。例如以下所看到的：

Defaults    requiretty

Defaults:nagios    !requiretty

#加入nagios 请求sudo，同意特定指令时（可跟參数），不须要password（如）。

nagios ALL=(ALL) NOPASSWD: ALL

改动完后。再check，数据出来了：

[[email protected] ~]# /usr/local/nagios/libexec/check_nrpe -H10.xx.xx.xx -c check_nginx_status

OK - nginx is running. 1 requests per second, 1 connections per second (1.00 requests per connection) | ‘reqpsec‘=1 ‘conpsec‘=1 ‘conpreq‘=1.00 ]

[[email protected] ~]#

 

3.2  share下check_nginxstatus脚本

 

  1. #!/bin/sh

  3. PROGNAME=`basename $0`
  4. VERSION=\\\"Version 1.1,\\\"
  5. AUTHOR=\\\"tim man\\\"

  7. ST_OK=0
  8. ST_WR=1
  9. ST_CR=2
  10. ST_UK=3
  11. hostname=\\\"localhost\\\"
  12. port=80
  13. path_pid=/var/run
  14. name_pid=\\\"nginx.pid\\\"
  15. status_page=\\\"nginx_status\\\"
  16. pid_check=1
  17. secure=0

  19. print_version() {
  20.     echo \\\"$VERSION $AUTHOR\\\"
  21. }

  23. print_help() {
  24.     print_version $PROGNAME $VERSION
  25.     echo \\\"\\\"
  26.     echo \\\"$PROGNAME is a Nagios plugin to check whether nginx is running.\\\"
  27.     echo \\\"It also parses the nginx\\\‘s status page to get requests and\\\"
  28.     echo \\\"connections per second as well as requests per connection. You\\\"
  29.     echo \\\"may have to alter your nginx configuration so that the plugin\\\"
  30.     echo \\\"can access the server\\\‘s status page.\\\"
  31.     echo \\\"The plugin is highly configurable for this reason. See below for\\\"
  32.     echo \\\"available options.\\\"
  33.     echo \\\"\\\"
  34.     echo \\\"$PROGNAME -H localhost -P 80 -p /var/run -n nginx.pid \\\"
  35.     echo \\\" -s nginx_statut -o /tmp [-w INT] [-c INT] [-S] [-N]\\\"
  36.     echo \\\"\\\"
  37.     echo \\\"Options:\\\"
  38.     echo \\\" -H/--hostname)\\\"
  39.     echo \\\" Defines the hostname. Default is: localhost\\\"
  40.     echo \\\" -P/--port)\\\"
  41.     echo \\\" Defines the port. Default is: 80\\\"
  42.     echo \\\" -p/--path-pid)\\\"
  43.     echo \\\" Path where nginx\\\‘s pid file is being stored. You might need\\\"
  44.     echo \\\" to alter this path according to your distribution. Default\\\"
  45.     echo \\\" is: /var/run\\\"
  46.     echo \\\" -n/--name_pid)\\\"
  47.     echo \\\" Name of the pid file. Default is: nginx.pid\\\"
  48.     echo \\\" -N/--no-pid-check)\\\"
  49.     echo \\\" Turn this on, if you don\\\‘t want to check for a pid file\\\"
  50.     echo \\\" whether nginx is running, e.g. when you\\\‘re checking a\\\"
  51.     echo \\\" remote server. Default is: off\\\"
  52.     echo \\\" -s/--status-page)\\\"
  53.     echo \\\" Name of the server\\\‘s status page defined in the location\\\"
  54.     echo \\\" directive of your nginx configuration. Default is:\\\"
  55.     echo \\\" nginx_status\\\"
  56.     echo \\\" -S/--secure)\\\"
  57.     echo \\\" In case your server is only reachable via SSL, use this\\\"
  58.     echo \\\" this switch to use HTTPS instead of HTTP. Default is: off\\\"
  59.     echo \\\" -w/--warning)\\\"
  60.     echo \\\" Sets a warning level for requests per second. Default is: off\\\"
  61.     echo \\\" -c/--critical)\\\"
  62.     echo \\\" Sets a critical level for requests per second. Default is:\\\"
  63.     echo \\\" off\\\"
  64.     exit $ST_UK
  65. }

  67. while test -n \\\"$1\\\"; do
  68.     case \\\"$1\\\" in
  69.         -help|-h)
  70.             print_help
  71.             exit $ST_UK
  72.             ;;
  73.         --version|-v)
  74.             print_version $PROGNAME $VERSION
  75.             exit $ST_UK
  76.             ;;
  77.         --hostname|-H)
  78.             hostname=$2
  79.             shift
  80.             ;;
  81.         --port|-P)
  82.             port=$2
  83.             shift
  84.             ;;
  85.         --path-pid|-p)
  86.             path_pid=$2
  87.             shift
  88.             ;;
  89.         --name-pid|-n)
  90.             name_pid=$2
  91.             shift
  92.             ;;
  93.         --no-pid-check|-N)
  94.             pid_check=0
  95.             ;;
  96.         --status-page|-s)
  97.             status_page=$2
  98.             shift
  99.             ;;
  100.         --secure|-S)
  101.             secure=1
  102.             ;;
  103.         --warning|-w)
  104.             warning=$2
  105.             shift
  106.             ;;
  107.         --critical|-c)
  108.             critical=$2
  109.             shift
  110.             ;;
  111.         *)
  112.             echo \\\"Unknown argument: $1\\\"
  113.             print_help
  114.             exit $ST_UK
  115.             ;;
  116.         esac
  117.     shift
  118. done

  120. get_wcdiff() {
  121.     if [ ! -z \\\"$warning\\\" -a ! -z \\\"$critical\\\" ]
  122.     then
  123.         wclvls=1

  125.         if [ ${warning} -ge ${critical} ]
  126.         then
  127.             wcdiff=1
  128.         fi
  129.     elif [ ! -z \\\"$warning\\\" -a -z \\\"$critical\\\" ]
  130.     then
  131.         wcdiff=2
  132.     elif [ -z \\\"$warning\\\" -a ! -z \\\"$critical\\\" ]
  133.     then
  134.         wcdiff=3
  135.     fi
  136. }

  138. val_wcdiff() {
  139.     if [ \\\"$wcdiff\\\" = 1 ]
  140.     then
  141.         echo \\\"Please adjust your warning/critical thresholds. The warning \\\\
  142. must be lower than the critical level!\\\"
  143.         exit $ST_UK
  144.     elif [ \\\"$wcdiff\\\" = 2 ]
  145.     then
  146.         echo \\\"Please also set a critical value when you want to use \\\\
  147. warning/critical thresholds!\\\"
  148.         exit $ST_UK
  149.     elif [ \\\"$wcdiff\\\" = 3 ]
  150.     then
  151.         echo \\\"Please also set a warning value when you want to use \\\\
  152. warning/critical thresholds!\\\"
  153.         exit $ST_UK
  154.     fi
  155. }

  157. check_pid() {
  158.     if [ -f \\\"$path_pid/$name_pid\\\" ]
  159.     then
  160.         retval=0
  161.     else
  162.         retval=1
  163.     fi
  164. }

  166. get_status() {
  167.     if [ \\\"$secure\\\" = 1 ]
  168.     then
  169.         wget_opts=\\\"-O- -q -t 3 -T 3 --no-check-certificate\\\"
  170.         #out1=`/usr/bin/wget ${wget_opts} http://${hostname}:${port}/${status_page}`
  171.        out1=`/usr/bin/wget -O- -q -t 3 -T 3 http://localhost:80/nginx_status`
  172.      sleep 1
  173.     out2=`/usr/bin/wget -O- -q -t 3 -T 3 http://localhost:80/nginx_status`
  174.     else 
  175.         wget_opts=\\\"-O- -q -t 3 -T 3\\\"
  176.     out1=`/usr/bin/wget -O- -q -t 3 -T 3 http://localhost:80/nginx_status` 
  177.     sleep 1
  178.         out2=`/usr/bin/wget -O- -q -t 3 -T 3 http://localhost:80/nginx_status`
  179.     fi
  180.     if [ -z \\\"$out1\\\" -o -z \\\"$out2\\\" ]
  181.     then
  182.         echo \\\"out1:$out1 out2:$out2, UNKNOWN - Local copy/copies of $status_page is empty.\\\"
  183.     exit $ST_UK
  184.     fi
  185. }

  187. get_vals() {
  188.     tmp1_reqpsec=`echo ${out1}|awk \\\‘{print $10}\\\‘`
  189.     tmp2_reqpsec=`echo ${out2}|awk \\\‘{print $10}\\\‘`
  190.     reqpsec=`expr $tmp2_reqpsec - $tmp1_reqpsec`

  192.     tmp1_conpsec=`echo ${out1}|awk \\\‘{print $9}\\\‘`
  193.     tmp2_conpsec=`echo ${out2}|awk \\\‘{print $9}\\\‘`
  194.     conpsec=`expr $tmp2_conpsec - $tmp1_conpsec`

  196.     reqpcon=`echo \\\"scale=2; $reqpsec / $conpsec\\\" | bc -l`
  197.     if [ \\\"$reqpcon\\\" = \\\".99\\\" ]
  198.     then
  199.         reqpcon=\\\"1.00\\\"
  200.     fi
  201. }

  203. do_output() {
  204.     output=\\\"nginx is running. $reqpsec requests per second, $conpsec connections per second ($reqpcon requests per connection)\\\"
  205. }

  207. do_perfdata() {
  208.     perfdata=\\\"\\\‘reqpsec\\\‘=$reqpsec \\\‘conpsec\\\‘=$conpsec \\\‘conpreq\\\‘=$reqpcon\\\"
  209. }

  211. # Here we 
  212. get_wcdiff
  213. val_wcdiff

  215. if [ ${pid_check} = 1 ]
  216. then
  217.     check_pid
  218.     if [ \\\"$retval\\\" = 1 ]
  219.     then
  220.         echo \\\"There\\\‘s no pid file for nginx. Is nginx running? Please also make sure whether your pid path and name is correct.\\\"
  221.         exit $ST_CR
  222.     fi
  223. fi

  225. get_status
  226. get_vals
  227. do_output
  228. do_perfdata

  230. if [[ -n \\\"$warning\\\" ]] && [[ -n \\\"$critical\\\" ]]
  231. then
  232.     if [[ \\\"$reqpsec\\\" -ge \\\"$warning\\\" ]] && [[ \\\"$reqpsec\\\" -lt \\\"$critical\\\" ]]
  233.     then
  234.         echo \\\"WARNING - ${output} | ${perfdata}\\\"
  235.     exit $ST_WR
  236.     elif [ \\\"$reqpsec\\\" -ge \\\"$critical\\\" ]
  237.     then
  238.         echo \\\"CRITICAL - ${output} | ${perfdata}\\\"
  239.     exit $ST_CR
  240.     else
  241.         echo \\\"OK - ${output} | ${perfdata} ]\\\"
  242.     exit $ST_OK
  243.     fi
  244. else
  245.     echo \\\"OK - ${output} | ${perfdata}\\\"
  246.     exit $ST_OK
  247. fi



以上是关于Nagios监控nginx服务具体过程的主要内容，如果未能解决你的问题，请参考以下文章

Nagios监控工具

Nagios 简介

监控之--Nagios如何监控本地主机及本地服务

监控之--Nagios如何监控本地主机及本地服务

SECURITY 04： Nagios监控实战 监控概述 Nagios监控服务

nagios配置过程详解