duilib 给List表头增加百分比控制宽度的功能

Posted 2022-07-31 Redrain

转载请说明原出处，谢谢~~：http://blog.csdn.net/zhuhongshu/article/details/42503147

       最近项目里需要用到包含表头列表，而窗体大小改变后，每个列表项的宽度不会自动改变，这样窗体变宽后列表就出现了一大片空白，非常难看。所以给列表头增加了属性，可以控制让每个列表项的宽度根据百分比来计算。这样再配合我之前写的对List控件的增强代码，就能让列表项的每列按照百分比控制宽度。

      分别要给CListHeaderUI类和CListHeaderItemUI类增加函数和属性。

      给CListHeaderUI增加scaleheader属性，只有scaleheader为真时才开启百分比功能，否则还是根据width属性来控制宽度

   <Attribute name="scaleheader" default="false" type="BOOL" comment="每个表头的宽度是否按照百分比来设置"/>

     给CListHeaderItemUI增加scale属性，设置本子表头的宽度百分比

   <Attribute name="scale" default="0" type="INT" comment="设置子表头所占总表头的百分比宽度，如40（代表占40%的宽度）"/>

     给CListHeaderItemUI增加属性的代码很简单，我就不贴了。给CListHeaderUI控件增加SetPos成员函数，写入如下代码，加入百分比功能。

void CListHeaderUI::SetPos(RECT rc)

	CControlUI::SetPos(rc);
	rc = m_rcItem;

	// Adjust for inset
	rc.left += m_rcInset.left;
	rc.top += m_rcInset.top;
	rc.right -= m_rcInset.right;
	rc.bottom -= m_rcInset.bottom;

	if( m_items.GetSize() == 0) 
		return;
	


	// Determine the width of elements that are sizeable
	SIZE szAvailable =  rc.right - rc.left, rc.bottom - rc.top ;

	int nAdjustables = 0;
	int cxFixed = 0;
	int nEstimateNum = 0;
	for( int it1 = 0; it1 < m_items.GetSize(); it1++ ) 
		CControlUI* pControl = static_cast<CControlUI*>(m_items[it1]);
		if( !pControl->IsVisible() ) continue;
		if( pControl->IsFloat() ) continue;
		SIZE sz = pControl->EstimateSize(szAvailable);
		if( sz.cx == 0 ) 
			nAdjustables++;
		
		else 
			if( sz.cx < pControl->GetMinWidth() ) sz.cx = pControl->GetMinWidth();
			if( sz.cx > pControl->GetMaxWidth() ) sz.cx = pControl->GetMaxWidth();
		
		cxFixed += sz.cx +  pControl->GetPadding().left + pControl->GetPadding().right;
		nEstimateNum++;
	
	cxFixed += (nEstimateNum - 1) * m_iChildPadding;

	int cxExpand = 0;
	int cxNeeded = 0;
	if( nAdjustables > 0 ) cxExpand = MAX(0, (szAvailable.cx - cxFixed) / nAdjustables);
	// Position the elements
	SIZE szRemaining = szAvailable;
	int iPosX = rc.left;

	int iAdjustable = 0;
	int cxFixedRemaining = cxFixed;

	for( int it2 = 0; it2 < m_items.GetSize(); it2++ ) 
		CControlUI* pControl = static_cast<CControlUI*>(m_items[it2]);
		if( !pControl->IsVisible() ) continue;
		if( pControl->IsFloat() ) 
			SetFloatPos(it2);
			continue;
		
		RECT rcPadding = pControl->GetPadding();
		szRemaining.cx -= rcPadding.left;

		SIZE sz = 0,0;
		if (m_bIsScaleHeader)
		
			CListHeaderItemUI* pHeaderItem = static_cast<CListHeaderItemUI*>(pControl);
			sz.cx = int(GetWidth() * (float)pHeaderItem->GetScale() / 100);
		
		else
		
			sz = pControl->EstimateSize(szRemaining);
		

		if( sz.cx == 0 ) 
			iAdjustable++;
			sz.cx = cxExpand;
			// Distribute remaining to last element (usually round-off left-overs)
			if( iAdjustable == nAdjustables ) 
				sz.cx = MAX(0, szRemaining.cx - rcPadding.right - cxFixedRemaining);
			
			if( sz.cx < pControl->GetMinWidth() ) sz.cx = pControl->GetMinWidth();
			if( sz.cx > pControl->GetMaxWidth() ) sz.cx = pControl->GetMaxWidth();
		
		else 
			if( sz.cx < pControl->GetMinWidth() ) sz.cx = pControl->GetMinWidth();
			if( sz.cx > pControl->GetMaxWidth() ) sz.cx = pControl->GetMaxWidth();

			cxFixedRemaining -= sz.cx;
		

		sz.cy = pControl->GetFixedHeight();
		if( sz.cy == 0 ) sz.cy = rc.bottom - rc.top - rcPadding.top - rcPadding.bottom;
		if( sz.cy < 0 ) sz.cy = 0;
		if( sz.cy < pControl->GetMinHeight() ) sz.cy = pControl->GetMinHeight();
		if( sz.cy > pControl->GetMaxHeight() ) sz.cy = pControl->GetMaxHeight();

		RECT rcCtrl =  iPosX + rcPadding.left, rc.top + rcPadding.top, iPosX + sz.cx + rcPadding.left + rcPadding.right, rc.top + rcPadding.top + sz.cy;
		pControl->SetPos(rcCtrl);
		iPosX += sz.cx + m_iChildPadding + rcPadding.left + rcPadding.right;
		cxNeeded += sz.cx + rcPadding.left + rcPadding.right;
		szRemaining.cx -= sz.cx + m_iChildPadding + rcPadding.right;
	
	cxNeeded += (nEstimateNum - 1) * m_iChildPadding;

总结：

       完整的代码可以在我的库里下载到：点击打开链接

   Redrain  2015.1.7