Android 6.0 修改模具
Posted 王睿丶
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了Android 6.0 修改模具相关的知识，希望对你有一定的参考价值。
kernel\\arch\\arm\\boot\\dts\\rk3126-86v-r2.dts
sensor@4c
compatible = "gs_mc3230";
reg = <0x4c>;
type = <2>;
irq_enable = <0>;
poll_delay_ms = <100>;
-- layout = <6>;
++ layout = <7>;//90 6->7
reprobe_en = <1>;
power-off-in-suspend = <1>;
;
sensor@18
compatible = "gs_sc7a20";
reg = <0x18>;
type = <SENSOR_TYPE_ACCEL>;
//irq_enable = <0>;
//pinctrl-names = "default";
//pinctrl-0 = <&sensor_gpio>;
//irq-gpio = <&gpio3 RK_PA2 IRQ_TYPE_EDGE_RISING>;
poll_delay_ms = <100>;
-- layout = <3>;
++ layout = <4>;
;
以上是关于Android 6.0 修改模具的主要内容，如果未能解决你的问题，请参考以下文章