安全工具-curl学习

Posted 2022-04-01 lady_killer9

目录

• curl介绍
• 命令参数
• 无选项
• • 命令
  • 结果
• 请求头
• • 仅显示返回的头部
  • • 命令
    • 结果
  • 保存返回的头部
  • • 命令
    • 结果
  • 添加请求头
  • • 命令
    • 结果
  • 覆盖User-Agent的值
  • • 命令
    • 结果
• GET请求
• POST请求
• • • 表单
    • json
• 显示详细信息
• 输出到文件
• 参考

---

curl介绍

curl是一个命令行工具，常用于发送http请求。在windows下，我常用postman来发送请求，现在常用Linux、Mac系统，因此，今天详细学习一下curl。

命令参数

Usage: curl [options...] <url>
     --abstract-unix-socket <path>  Connect via abstract Unix domain socket
     --alt-svc <file name>  Enable alt-svc with this cache file
     --anyauth       Pick any authentication method
 -a, --append        Append to target file when uploading
     --aws-sigv4 <provider1[:provider2[:region[:service]]]>  Use AWS V4 signature authentication
     --basic         Use HTTP Basic Authentication
     --cacert <file>  CA certificate to verify peer against
     --capath <dir>  CA directory to verify peer against
 -E, --cert <certificate[:password]>  Client certificate file and password
     --cert-status   Verify the status of the server cert via OCSP-staple
     --cert-type <type>  Certificate type (DER/PEM/ENG)
     --ciphers <list of ciphers>  SSL ciphers to use
     --compressed    Request compressed response
     --compressed-ssh  Enable SSH compression
 -K, --config <file>  Read config from a file
     --connect-timeout <fractional seconds>  Maximum time allowed for connection
     --connect-to <HOST1:PORT1:HOST2:PORT2>  Connect to host
 -C, --continue-at <offset>  Resumed transfer offset
 -b, --cookie <data|filename>  Send cookies from string/file
 -c, --cookie-jar <filename>  Write cookies to <filename> after operation
     --create-dirs   Create necessary local directory hierarchy
     --create-file-mode <mode>  File mode (octal) for created files
     --crlf          Convert LF to CRLF in upload
     --crlfile <file>  Use this CRL list
     --curves <algorithm list>  (EC) TLS key exchange algorithm(s) to request
 -d, --data <data>   HTTP POST data
     --data-ascii <data>  HTTP POST ASCII data
     --data-binary <data>  HTTP POST binary data
     --data-raw <data>  HTTP POST data, '@' allowed
     --data-urlencode <data>  HTTP POST data url encoded
     --delegation <LEVEL>  GSS-API delegation permission
     --digest        Use HTTP Digest Authentication
 -q, --disable       Disable .curlrc
     --disable-eprt  Inhibit using EPRT or LPRT
     --disable-epsv  Inhibit using EPSV
     --disallow-username-in-url  Disallow username in url
     --dns-interface <interface>  Interface to use for DNS requests
     --dns-ipv4-addr <address>  IPv4 address to use for DNS requests
     --dns-ipv6-addr <address>  IPv6 address to use for DNS requests
     --dns-servers <addresses>  DNS server addrs to use
     --doh-cert-status  Verify the status of the DoH server cert via OCSP-staple
     --doh-insecure  Allow insecure DoH server connections
     --doh-url <URL>  Resolve host names over DoH
 -D, --dump-header <filename>  Write the received headers to <filename>
     --egd-file <file>  EGD socket path for random data
     --engine <name>  Crypto engine to use
     --etag-compare <file>  Pass an ETag from a file as a custom header
     --etag-save <file>  Parse ETag from a request and save it to a file
     --expect100-timeout <seconds>  How long to wait for 100-continue
 -f, --fail          Fail silently (no output at all) on HTTP errors
     --fail-early    Fail on first transfer error, do not continue
     --fail-with-body  Fail on HTTP errors but save the body
     --false-start   Enable TLS False Start
 -F, --form <name=content>  Specify multipart MIME data
     --form-string <name=string>  Specify multipart MIME data
     --ftp-account <data>  Account data string
     --ftp-alternative-to-user <command>  String to replace USER [name]
     --ftp-create-dirs  Create the remote dirs if not present
     --ftp-method <method>  Control CWD usage
     --ftp-pasv      Use PASV/EPSV instead of PORT
 -P, --ftp-port <address>  Use PORT instead of PASV
     --ftp-pret      Send PRET before PASV
     --ftp-skip-pasv-ip  Skip the IP address for PASV
     --ftp-ssl-ccc   Send CCC after authenticating
     --ftp-ssl-ccc-mode <active/passive>  Set CCC mode
     --ftp-ssl-control  Require SSL/TLS for FTP login, clear for transfer
 -G, --get           Put the post data in the URL and use GET
 -g, --globoff       Disable URL sequences and ranges using  and []
     --happy-eyeballs-timeout-ms <milliseconds>  Time for IPv6 before trying IPv4
     --haproxy-protocol  Send HAProxy PROXY protocol v1 header
 -I, --head          Show document info only
 -H, --header <header/@file>  Pass custom header(s) to server
 -h, --help <category>  Get help for commands
     --hostpubmd5 <md5>  Acceptable MD5 hash of the host public key
     --hsts <file name>  Enable HSTS with this cache file
     --http0.9       Allow HTTP 0.9 responses
 -0, --http1.0       Use HTTP 1.0
     --http1.1       Use HTTP 1.1
     --http2         Use HTTP 2
     --http2-prior-knowledge  Use HTTP 2 without HTTP/1.1 Upgrade
     --http3         Use HTTP v3
     --ignore-content-length  Ignore the size of the remote resource
 -i, --include       Include protocol response headers in the output
 -k, --insecure      Allow insecure server connections when using SSL
     --interface <name>  Use network INTERFACE (or address)
 -4, --ipv4          Resolve names to IPv4 addresses
 -6, --ipv6          Resolve names to IPv6 addresses
 -j, --junk-session-cookies  Ignore session cookies read from file
     --keepalive-time <seconds>  Interval time for keepalive probes
     --key <key>     Private key file name
     --key-type <type>  Private key file type (DER/PEM/ENG)
     --krb <level>   Enable Kerberos with security <level>
     --libcurl <file>  Dump libcurl equivalent code of this command line
     --limit-rate <speed>  Limit transfer speed to RATE
 -l, --list-only     List only mode
     --local-port <num/range>  Force use of RANGE for local port numbers
 -L, --location      Follow redirects
     --location-trusted  Like --location, and send auth to other hosts
     --login-options <options>  Server login options
     --mail-auth <address>  Originator address of the original email
     --mail-from <address>  Mail from this address
     --mail-rcpt <address>  Mail to this address
     --mail-rcpt-allowfails  Allow RCPT TO command to fail for some recipients
 -M, --manual        Display the full manual
     --max-filesize <bytes>  Maximum file size to download
     --max-redirs <num>  Maximum number of redirects allowed
 -m, --max-time <fractional seconds>  Maximum time allowed for the transfer
     --metalink      Process given URLs as metalink XML file
     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
 -n, --netrc         Must read .netrc for user name and password
     --netrc-file <filename>  Specify FILE for netrc
     --netrc-optional  Use either .netrc or URL
 -:, --next          Make next URL use its separate set of options
     --no-alpn       Disable the ALPN TLS extension
 -N, --no-buffer     Disable buffering of the output stream
     --no-keepalive  Disable TCP keepalive on the connection
     --no-npn        Disable the NPN TLS extension
     --no-progress-meter  Do not show the progress meter
     --no-sessionid  Disable SSL session-ID reusing
     --noproxy <no-proxy-list>  List of hosts which do not use proxy
     --ntlm          Use HTTP NTLM authentication
     --ntlm-wb       Use HTTP NTLM authentication with winbind
     --oauth2-bearer <token>  OAuth 2 Bearer Token
 -o, --output <file>  Write to file instead of stdout
     --output-dir <dir>  Directory to save files in
 -Z, --parallel      Perform transfers in parallel
     --parallel-immediate  Do not wait for multiplexing (with --parallel)
     --parallel-max <num>  Maximum concurrency for parallel transfers
     --pass <phrase>  Pass phrase for the private key
     --path-as-is    Do not squash .. sequences in URL path
     --pinnedpubkey <hashes>  FILE/HASHES Public key to verify peer against
     --post301       Do not switch to GET after following a 301
     --post302       Do not switch to GET after following a 302
     --post303       Do not switch to GET after following a 303
     --preproxy [protocol://]host[:port]  Use this proxy first
 -#, --progress-bar  Display transfer progress as a bar
     --proto <protocols>  Enable/disable PROTOCOLS
     --proto-default <protocol>  Use PROTOCOL for any URL missing a scheme
     --proto-redir <protocols>  Enable/disable PROTOCOLS on redirect
 -x, --proxy [protocol://]host[:port]  Use this proxy
     --proxy-anyauth  Pick any proxy authentication method
     --proxy-basic   Use Basic authentication on the proxy
     --proxy-cacert <file>  CA certificate to verify peer against for proxy
     --proxy-capath <dir>  CA directory to verify peer against for proxy
     --proxy-cert <cert[:passwd]>  Set client certificate for proxy
     --proxy-cert-type <type>  Client certificate type for HTTPS proxy
     --proxy-ciphers <list>  SSL ciphers to use for proxy
     --proxy-crlfile <file>  Set a CRL list for proxy
     --proxy-digest  Use Digest authentication on the proxy
     --proxy-header <header/@file>  Pass custom header(s) to proxy
     --proxy-insecure  Do HTTPS proxy connections without verifying the proxy
     --proxy-key <key>  Private key for HTTPS proxy
     --proxy-key-type <type>  Private key file type for proxy
     --proxy-negotiate  Use HTTP Negotiate (SPNEGO) authentication on the proxy
     --proxy-ntlm    Use NTLM authentication on the proxy
     --proxy-pass <phrase>  Pass phrase for the private key for HTTPS proxy
     --proxy-pinnedpubkey <hashes>  FILE/HASHES public key to verify proxy with
     --proxy-service-name <name>  SPNEGO proxy service name
     --proxy-ssl-allow-beast  Allow security flaw for interop for HTTPS proxy
     --proxy-ssl-auto-client-cert  Use auto client certificate for proxy (Schannel)
     --proxy-tls13-ciphers <ciphersuite list>  TLS 1.3 proxy cipher suites
     --proxy-tlsauthtype <type>  TLS authentication type for HTTPS proxy
     --proxy-tlspassword <string>  TLS password for HTTPS proxy
     --proxy-tlsuser <name>  TLS username for HTTPS proxy
     --proxy-tlsv1   Use TLSv1 for HTTPS proxy
 -U, --proxy-user <user:password>  Proxy user and password
     --proxy1.0 <host[:port]>  Use HTTP/1.0 proxy on given port
 -p, --proxytunnel   Operate through an HTTP proxy tunnel (using CONNECT)
     --pubkey <key>  SSH Public key file name
 -Q, --quote <command>  Send command(s) to server before transfer
     --random-file <file>  File for reading random data from
 -r, --range <range>  Retrieve only the bytes within RANGE
     --raw           Do HTTP "raw"; no transfer decoding
 -e, --referer <URL>  Referrer URL
 -J, --remote-header-name  Use the header-provided filename
 -O, --remote-name   Write output to a file named as the remote file
     --remote-name-all  Use the remote file name for all URLs
 -R, --remote-time   Set the remote file's time on the local output
 -X, --request <command>  Specify request command to use
     --request-target <path>  Specify the target for this request
     --resolve <[+]host:port:addr[,addr]...>  Resolve the host+port to this address
     --retry <num>   Retry request if transient problems occur
     --retry-all-errors  Retry all errors (use with --retry)
     --retry-connrefused  Retry on connection refused (use with --retry)
     --retry-delay <seconds>  Wait time between retries
     --retry-max-time <seconds>  Retry only within this period
     --sasl-authzid <identity>  Identity for SASL PLAIN authentication
     --sasl-ir       Enable initial response in SASL authentication
     --service-name <name>  SPNEGO service name
 -S, --show-error    Show error even when -s is used
 -s, --silent        Silent mode
     --socks4 <host[:port]>  SOCKS4 proxy on given host + port
     --socks4a <host[:port]>  SOCKS4a proxy on given host + port
     --socks5 <host[:port]>  SOCKS5 proxy on given host + port
     --socks5-basic  Enable username/password auth for SOCKS5 proxies
     --socks5-gssapi  Enable GSS-API auth for SOCKS5 proxies
     --socks5-gssapi-nec  Compatibility with NEC SOCKS5 server
     --socks5-gssapi-service <name>  SOCKS5 proxy service name for GSS-API
     --socks5-hostname <host[:port]>  SOCKS5 proxy, pass host name to proxy
 -Y, --speed-limit <speed>  Stop transfers slower than this
 -y, --speed-time <seconds>  Trigger 'speed-limit' abort after this time
     --ssl           Try SSL/TLS
     --ssl-allow-beast  Allow security flaw to improve interop
     --ssl-auto-client-cert  Use auto client certificate (Schannel)
     --ssl-no-revoke  Disable cert revocation checks (Schannel)
     --ssl-reqd      Require SSL/TLS
     --ssl-revoke-best-effort  Ignore missing/offline cert CRL dist points
 -2, --sslv2         Use SSLv2
 -3, --sslv3         Use SSLv3
     --stderr <file>  Where to redirect stderr
     --styled-output  Enable styled output for HTTP headers
     --suppress-connect-headers  Suppress proxy CONNECT response headers
     --tcp-fastopen  Use TCP Fast Open
     --tcp-nodelay   Use the TCP_NODELAY option
 -t, --telnet-option <opt=val>  Set telnet option
     --tftp-blksize <value>  Set TFTP BLKSIZE option
     --tftp-no-options  Do not send any TFTP options
 -z, --time-cond <time>  Transfer based on a time condition
     --tls-max <VERSION>  Set maximum allowed TLS version
     --tls13-ciphers <ciphersuite list>  TLS 1.3 cipher suites to use
     --tlsauthtype <type>  TLS authentication type
     --tlspassword <string>  TLS password
     --tlsuser <name>  TLS user name
 -1, --tlsv1         Use TLSv1.0 or greater
     --tlsv1.0       Use TLSv1.0 or greater
     --tlsv1.1       Use TLSv1.1 or greater
     --tlsv1.2       Use TLSv1.2 or greater
     --tlsv1.3       Use TLSv1.3 or greater
     --tr-encoding   Request compressed transfer encoding
     --trace <file>  Write a debug trace to FILE
     --trace-ascii <file>  Like --trace, but without hex output
     --trace-time    Add time stamps to trace/verbose output
     --unix-socket <path>  Connect through this Unix domain socket
 -T, --upload-file <file>  Transfer local FILE to destination
     --url <url>     URL to work with
 -B, --use-ascii     Use ASCII/text transfer
 -u, --user <user:password>  Server user and password
 -A, --user-agent <name>  Send User-Agent <name> to server
 -v, --verbose       Make the operation more talkative
 -V, --version       Show version number and quit
 -w, --write-out <format>  Use output FORMAT after completion
     --xattr         Store metadata in extended file attributes

通过curl --help all帮助命令，我们可以看到所有的选项，这里学几个常用的选项

无选项

命令

curl http://httpbin.org

结果

命令行结果

可以看到返回了html页面
wireshark抓包结果

可以看到curl发送了一个HTTP1.1的GET请求，添加了请求头HOST、User-Agent和Accept。其中User-Agent是版本。

可以看到httpbin.org的响应包含了头部和数据，数据就是curl显示的html页面代码。那么头部curl如何显示呢？请继续阅读。

请求头

仅显示返回的头部

-I选项

命令

curl http://httpbin.org -I

结果

可以看到仅显示了头部

保存返回的头部

-D <filename>

命令

curl http://httpbin.org -D recv_head.txt

结果

可以看到添加了将返回数据包的头部保存到E盘下recv_head.txt文件的选项，打开文件

可以看到和前面抓包的结果一样。

添加请求头

 -H <header/@file>

请求头使用key: value的形式

命令

curl -H "blog: lady_killer9" -H "User-Agent: firefox" http://httpbin.org

结果

可以看到覆盖了自带的User-Agent，添加了新的请求头部blog

覆盖User-Agent的值

UserAgent是经常用的，可以使用-A直接替换value

-A <name>

命令

curl -A chrome http://httpbin.org

结果

可以看到User-Agent修改了

GET请求

默认发送的就是GET请求，这里说一下如何添加参数。一般在url上使用?添加参数即可，注意，如果不转义的话，使用双引号。


也可以使用-G选项配合-d选项添加

POST请求

-X指定请求，-d添加数据

-X <command>
-d <data>

表单

curl -X POST -d "blog=lady_killer&name=9" http://httpbin.org/post

可以看到添加了curl相比GET又添加了两个请求头Content-Length和Content-Type

json

在学http协议的时候，我们学习了http的很多头部，其中Content-Type头部指定了类型，postman能够发送很多类型，如下图所示

其中，json格式的数据是最常用的，对应的Content-Type是"application/json"

curl -H "Content-Type:application/json" -X POST -d "blog:lady_killer,name:9" http://httpbin.org/post

显示详细信息

-v 选项

输出到文件

-o选项

-o <file>

参考

网络-http协议学习笔记（消息结构、请求方法、状态码等）
curl官网
21个curl命令练习
21个curl命令练习答案参考

更多内容查看：网络安全-自学笔记

喜欢本文的请动动小手点个赞，收藏一下，有问题请下方评论，转载请注明出处，并附有原文链接，谢谢！如有侵权，请及时联系。如果您感觉有所收获，自愿打赏，可选择支付宝18833895206（小于），您的支持是我不断更新的动力。
**关注博主公众号，获取网络安全知识、大厂内推等更多福利、加我微信，备注 CSDN 为什么加我 你的名字 **