原生RedHat OpenStack搭建

Posted 2023-03-12 坏坏-5

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了原生RedHat OpenStack搭建相关的知识，希望对你有一定的参考价值。

文章目录

OpenStack的搭建方式
实验软件及镜像
实验环境
配置NTP节点
配置Controller控制节点和Compute计算节点
- 初始化配置
安装RedHat OpenStack
- 安装部署OpenStack
配置OVS桥接

OpenStack的搭建方式

Allinone
- 在一台服务节点上安装阉割版的OpenStack，再使用此节点，在其他三个节点上安装不同的组件
TrpileO（OpenStack On OpenStack）
PackStack（RedHat）
Ansbile（自动化运维工具）
原生OpenStack安装时，是手动安装各个组件

实验软件及镜像

镜像【下载】，提取码Bad5

软件	作用
VMware Workstation Pro	用于部署实验主机节点
Xshell/Putty/Mobaxterm	用于远程连接节点主机
WinSCP	用于上传ISO镜像文件至节点主机
rhel-server-7.1-x86_64-dvd.iso	用于安装节点主机的镜像文件
RHEL7OSP-6.0-2015-02-23.2-x86_64.iso	用于安装搭建OpenStack
small.img	用于发放云主机

实验环境

实验使用的为RHEL7.1版本的Linux，网络模式为仅主机模式，桥接到物理主机的VMnet1网卡，VMnnet1网卡的IP作为节点主机的DNS服务器

主机名	IP地址	功能	配置
NTP	192.168.43.128	提供 NTP服务以及网络YUM源	2CPU/1G_RAM/200G_Disk
Controller	192.168.43.129	作为管理节点和计算节点	2CPU/4G_RAM/200G_Disk
Compute	192.168.43.130	作为计算节点	2CPU/4G_RAM/200G_Disk
物理主机VMnet1	192.168.43.1

配置NTP节点

初始化配置

修改主机名为NTP
关闭SeLinux
配置主机的IP地址、子网掩码、网关以及DNS
禁止NetworkManager开机自启
关闭防火墙并禁止防火墙开机自启，检查防火墙的状态
重启节点主机

[root@localhost ~]# vim /etc/hostname
  NTP
[root@localhost ~]# vim /etc/selinux/config
  SELINUX=disabled
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736
  TYPE=Ethernet
  BOOTPROTO=static
  NAME=eno16777736
  DEVICE=eno16777736
  ONBOOT=yes
  IPADDR=192.168.43.128
  NETMASK=255.255.255.0
  GATEWAY=192.168.43.1
  DNS1=192.168.43.1
[root@localhost ~]# systemctl disable NetworkManager
[root@localhost ~]# systemctl stop firewall.service
[root@localhost ~]# systemctl disable firewall.service
[root@localhost ~]# systemctl status firewall.service
firewall.service
   Loaded: not-found (Reason: No such file or directory)
   Active: inactive (dead)
[root@localhost ~]# reboot

配置本地yum仓库

配置本地yum源文件
挂载RHEL7.1的镜像文件到NTP节点主机的/mnt下

[root@NTP ~]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# ls
[root@NTP yum.repos.d]# vim RHEL.repo
  [Base]
  name=RHEL
  baseurl=file:///mnt
  gpgcheck=0
  enable=1
[root@NTP yum.repos.d]# mount /dev/cdrom /mnt/    #将ISO文件挂载到/mnt下
mount: /dev/sr0 is write-protected, mounting read-only
[root@NTP yum.repos.d]# yum clean all     #清除yum缓存
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: InstallMedia Base
Cleaning up everything
[root@NTP yum.repos.d]# yum repolist    #刷新yum仓库
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
(1/2): Base/group_gz                                       | 134 kB   00:00
(2/2): Base/primary_db                                     | 3.4 MB   00:00
repo id                               repo name                           status
Base                                  RHEL                                4,371
repolist: 4,371

上传镜像文件至NTP节点

创建/iso目录，用于存放镜像文件
使用WinSCP或Mobaxterm将镜像文件上传到NTP节点

[root@NTP ~]# mkdir /iso
[root@NTP ~]# cd /iso/
[root@NTP iso]# ls
RHEL7OSP-6.0-2015-02-23.2-x86_64.iso  rhel-server-7.1-x86_64-dvd.iso

搭建基于http的网络yum源

安装http服务，启动http服务，并设置开机自启动
查看http服务的状态
创建发布目录，并配置镜像文件开机自动挂载到发布目录
重新配置基于http的网络yum源仓库，并测试网络yum源的可用性（如果在yum仓库的目录中还有系统自动生成的其他.repo的文件，需要全部删掉，避免影响之后的实验）

[root@NTP ~]# yum  -y install httpd
[root@NTP ~]# systemctl start httpd
[root@NTP ~]# systemctl enable httpd
[root@NTP ~]# systemctl status httpd
httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
   Active: active (running) since Thu 2023-01-12 15:55:35 CST; 19s ago
 Main PID: 10713 (httpd)
  ......
[root@NTP ~]# mkdir /var/www/html/ISO,OpenStack
[root@NTP ~]# cd /var/www/html/
[root@NTP html]# ls
ISO  OpenStack
[root@NTP html]# vim /etc/fstab    #配置开机自动挂载
[root@NTP html]# tail -2 /etc/fstab
/iso/rhel-server-7.1-x86_64-dvd.iso /var/www/html/ISO iso9660 defaults,loop,ro 0 0
/iso/RHEL7OSP-6.0-2015-02-23.2-x86_64.iso /var/www/html/OpenStack iso9660 defaults,loop,ro 0 0
[root@NTP html]# df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/mapper/rhel-root   50G  7.1G   43G  15% /
devtmpfs               481M     0  481M   0% /dev
tmpfs                  490M  140K  490M   1% /dev/shm
tmpfs                  490M  7.1M  483M   2% /run
tmpfs                  490M     0  490M   0% /sys/fs/cgroup
/dev/sda1              497M  124M  373M  25% /boot
/dev/mapper/rhel-home  148G   33M  148G   1% /home
/dev/sr0               3.7G  3.7G     0 100% /mnt
[root@NTP html]# mount -a  #重新读取fstab文件，进行挂载
[root@NTP html]# df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/mapper/rhel-root   50G  7.1G   43G  15% /
devtmpfs               481M     0  481M   0% /dev
tmpfs                  490M  140K  490M   1% /dev/shm
tmpfs                  490M  7.1M  483M   2% /run
tmpfs                  490M     0  490M   0% /sys/fs/cgroup
/dev/sda1              497M  124M  373M  25% /boot
/dev/mapper/rhel-home  148G   33M  148G   1% /home
/dev/sr0               3.7G  3.7G     0 100% /mnt
/dev/loop0             3.7G  3.7G     0 100% /var/www/html/ISO
/dev/loop1             515M  515M     0 100% /var/www/html/OpenStack
[root@NTP html]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# vim RHEL.repo
  [Base]
  name=RHEL
  baseurl=http://192.168.43.128/ISO
  gpgcheck=0
  enable=1
[root@NTP yum.repos.d]# vim OpenStack.repo
  [RH7-RHOS-6.0-Installer]
  name=RH7-RHOS-6.0-Installer
  baseurl=http://192.168.43.128/OpenStack/RH7-RHOS-6.0-Installer
  gpgcheck=0
  enabled=1

  [RH7-RHOS-6.0]
  name=RH7-RHOS-6.0
  baseurl=http://192.168.43.128/OpenStack/RH7-RHOS-6.0
  gpgcheck=0
  enabled=1

  [RHEL-7-RHSCL-1.2]
  name=RHEL-7-RHSCL-1.2
  baseurl=http://192.168.43.128/OpenStack/RHEL-7-RHSCL-1.2
  gpgcheck=0
  enabled=1

  [RHEL7-Errata]
  name=RHEL7-Errata
  baseurl=http://192.168.43.128/OpenStack/RHEL7-Errata
  gpgcheck=0
  enabeld=1
[root@NTP yum.repos.d]# yum clean all
[root@NTP yum.repos.d]# yum repolist all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
RH7-RHOS-6.0                                             | 1.3 kB     00:00
RH7-RHOS-6.0-Installer                                   | 1.2 kB     00:00
RHEL-7-RHSCL-1.2                                         | 3.3 kB     00:00
RHEL7-Errata                                             | 2.9 kB     00:00
(1/6): Base/group_gz                                       | 134 kB   00:00
(2/6): Base/primary_db                                     | 3.4 MB   00:00
(3/6): RH7-RHOS-6.0/primary                                | 117 kB   00:00
(4/6): RHEL-7-RHSCL-1.2/primary_db                         | 776 kB   00:00
(5/6): RHEL7-Errata/primary_db                             |  10 kB   00:00
(6/6): RH7-RHOS-6.0-Installer/primary                      |  47 kB   00:00
RH7-RHOS-6.0                                                            393/393
RH7-RHOS-6.0-Installer                                                  194/194
repo id                          repo name                        status
Base                             RHEL                             enabled: 4,371
RH7-RHOS-6.0                     RH7-RHOS-6.0                     enabled:   393
RH7-RHOS-6.0-Installer           RH7-RHOS-6.0-Installer           enabled:   194
RHEL-7-RHSCL-1.2                 RHEL-7-RHSCL-1.2                 enabled: 1,766
RHEL7-Errata                     RHEL7-Errata                     enabled:    11
repolist: 6,735

搭建NTP服务

安装NTP服务
配置NTP服务，将NTP节点主机作为服务端。控制节点和计算节点会向NTP节点进行时间同步
启动NTP服务，并设置开机自启动，查看NTP服务的状态
关闭chrony服务，并禁止开机自启。此服务也可以作为时间同步服务器，会和NTP冲突

[root@NTP yum.repos.d]# cd
[root@NTP ~]# rpm -qa | grep ntp    #查看是否安装了NTP服务
ntpdate-4.2.6p5-19.el7_0.x86_64
fontpackages-filesystem-1.44-8.el7.noarch
[root@NTP ~]# yum -y install ntp
    ....
Installed:
  ntp.x86_64 0:4.2.6p5-19.el7_0

Complete!
[root@NTP ~]# vim /etc/ntp.conf    #将网络时间同步服务器注释，配置自身作为时间同步服务器
  ......
   21 #server 0.rhel.pool.ntp.org iburst
   22 #server 1.rhel.pool.ntp.org iburst
   23 #server 2.rhel.pool.ntp.org iburst
   24 #server 3.rhel.pool.ntp.org iburst
   25
   26 server 127.127.1.0    #配置时间同步服务器为自身
   27 fudge 127.127.1.0 stratum 10    #配置自身作为时间同步服务器
  ......
[root@NTP ~]# systemctl start ntpd
[root@NTP ~]# systemctl enable ntpd    #配置NTP服务开机自启动
ln -s '/usr/lib/systemd/system/ntpd.service' '/etc/systemd/system/multi-user.target.wants/ntpd.service'
[root@NTP ~]# systemctl status ntpd
ntpd.service - Network Time Service
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled)
   Active: active (running) since Thu 2023-01-12 16:24:12 CST; 18s ago
 Main PID: 21546 (ntpd)
   CGroup: /system.slice/ntpd.service
           └─21546 /usr/sbin/ntpd -u ntp:ntp -g
  ......
[root@NTP ~]# systemctl stop chrony
[root@NTP ~]# systemctl disable chronyd.service
rm '/etc/systemd/system/multi-user.target.wants/chronyd.service'
[root@NTP ~]# systemctl status chronyd.service
chronyd.service - NTP client/server
   Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled)
   Active: inactive (dead)
  ......

NTP节点配置完成

配置Controller控制节点和Compute计算节点

初始化配置

修改主机名为Controller
关闭SeLinux
配置主机的IP地址、子网掩码、网关以及DNS（这里回归了网卡传统命名，所以是ifcfg-eth0）
禁止NetworkManager开机自启
关闭防火墙并禁止防火墙开机自启，检查防火墙的状态
重启节点主机

[root@localhost ~]# vim /etc/hostname
  Controller
[root@localhost ~]# vim /etc/selinux/config
  SELINUX=disabled
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0
  TYPE=Ethernet
  BOOTPROTO=static
  NAME=eth0
  DEVICE=eth0
  ONBOOT=yes
  IPADDR=192.168.43.129
  NETMASK=255.255.255.0
  GATEWAY=192.168.43.1
  DNS1=192.168.43.1
[root@localhost ~]# systemctl disable NetworkManager
[root@localhost ~]# systemctl stop firewall.service
[root@localhost ~]# systemctl disable firewall.service
[root@localhost ~]# systemctl status firewall.service
firewall.service
   Loaded: not-found (Reason: No such file or directory)
   Active: inactive (dead)
[root@localhost ~]# reboot

重启完成后，测试与NTP节点主机的连通性

在NTP节点主机，将配置好的网络yum源仓库文件传给Controller控制节点

[root@NTP ~]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# ls
OpenStack.repo  redhat.repo  RHEL.repo
[root@NTP yum.repos.d]# rm -rf redhat.repo
[root@NTP yum.repos.d]# ls
OpenStack.repo  RHEL.repo
[root@NTP yum.repos.d]# scp ./* root@192.168.43.129:/etc/yum.repos.d/
The authenticity of host '192.168.43.129 (192.168.43.129)' can't be established.
ECDSA key fingerprint is e9:ee:b8:50:13:9b:f7:de:70:ef:44:1f:11:35:cb:54.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.43.129' (ECDSA) to the list of known hosts.
root@192.168.43.129's password:
OpenStack.repo                                100%  473     0.5KB/s   00:00
RHEL.repo                                     100%   71     0.1KB/s   00:00

在控制节点测试网络yum源仓库的可用性

[root@Controller ~]# cd /etc/yum.repos.d/
[root@Controller yum.repos.d]# ls
OpenStack.repo  redhat.repo  RHEL.repo
[root@Controller yum.repos.d]# yum clean all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: Base RH7-RHOS-6.0 RH7-RHOS-6.0-Installer RHEL-7-RHSCL-1.2
              : RHEL7-Errata
Cleaning up everything
[root@Controller yum.repos.d]# yum repolist all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
RH7-RHOS-6.0                                             | 1.3 kB     00:00
RH7-RHOS-6.0-Installer                                   | 1.2 kB     00:00
RHEL-7-RHSCL-1.2                                         | 3.3 kB     00:00
RHEL7-Errata                                             | 2.9 kB     00:00
(1/6): Base/group_gz                                       | 134 kB   00:00
(2/6): RHEL7-Errata/primary_db                             |  10 kB   00:00
(3/6): RH7-RHOS-6.0-Installer/primary                      |  47 kB   00:00
(4/6): RH7-RHOS-6.0/primary                                | 117 kB   00:00
(5/6): Base/primary_db                                     | 3.4 MB   00:00
(6/6): RHEL-7-RHSCL-1.2/primary_db                         | 776 kB   00:00
RH7-RHOS-6.0                                                            393/393
RH7-RHOS-6.0-Installer                                                  194/194
repo id                          repo name                        status
Base                             RHEL                             enabled: 4,371
RH7-RHOS-6.0                     RH7-RHOS-6.0                     enabled:   393
RH7-RHOS-6.0-Installer           RH7-RHOS-6.0-Installer           enabled:   194
RHEL-7-RHSCL-1.2                 RHEL-7-RHSCL-1.2                 enabled: 1,766
RHEL7-Errata                     RHEL7-Errata                     enabled:    11
repolist: 6,735

在Compute计算节点同样的初始化配置节点主机，并测试连通性
将NTP节点主机的yum源仓库文件上传到Compute计算节点上，并测试网络yum源仓库的可用性

安装RedHat OpenStack

在控制节点安装packstack工具，用于安装部署OpenStack
安装完成后，检查控制节点的DNS是否配置正确。如果配置不正确，需要在网卡的配置文件中重新配置DNS

[root@Controller ~]# yum -y install openstack-packstack
   ......
Installed:
  openstack-packstack.noarch 0:2014.2-0.16.dev1401.gdd19d48.el7ost

Dependency Installed:
  PyYAML.x86_64 0:3.10-11.el7
  libyaml.x86_64 0:0.1.4-11.el7_0
  openstack-packstack-puppet.noarch 0:2014.2-0.16.dev1401.gdd19d48.el7ost
  openstack-puppet-modules.noarch 0:2014.2.8-2.el7ost
    ......
Complete!
[root@Controller ~]# cat /etc/resolv.conf
nameserver 192.168.43.1

安装部署OpenStack

生成应答文件，并修改该应答文件
利用应答文件，使用packstack工具安装OpenStack

[root@Controller ~]# packstack --gen-answer-file=/root/ans.txt
Packstack changed given value  to required value /root/.ssh/id_rsa.pub
[root@Controller ~]# cd /root/
[root@Controller ~]# ls
anaconda-ks.cfg  Desktop    Downloads             Music     Public     Videos
ans.txt          Documents  initial-setup-ks.cfg  Pictures  Templates
[root@Controller ~]# vim ans.txt
  ......
  67 CONFIG_NTP_SERVERS=192.168.43.128  #配置NTP服务器节点
  ......
  85 CONFIG_CONTROLLER_HOST=192.168.43.129  #配置控制节点
  ......
  89 CONFIG_COMPUTE_HOSTS=192.168.43.129,192.168.43.130  #配置多计算节点，控制节点复用
  ......
  93 CONFIG_NETWORK_HOSTS=192.168.43.129  #配置网络节点，控制节点暂代
  ......
  246 CONFIG_KEYSTONE_ADMIN_PW=badboy  #配置Web界面管理员登录密码 
  ......
  560 CONFIG_HORIZON_SSL=y   #配置加密通信的Web界面
  ......
  629 CONFIG_PROVISION_DEMO=n  #配置不创建演示环境
  ......
[root@Controller ~]# packstack --answer-file=/root/ans.txt
Welcome to the Packstack setup utility

The installation log file is available at: /var/tmp/packstack/20230112-173134-eqBcat/openstack-setup.log

Installing:
Clean Up                                             [ DONE ]
root@192.168.43.129's password:
root@192.168.43.130's password:
Setting up ssh keys                                  [ DONE ]
Discovering hosts' details                           [ DONE ]
  ......
Applying 192.168.43.130_postscript.pp
192.168.43.130_postscript.pp:                        [ DONE ]
192.168.43.129_postscript.pp:                        [ DONE ]
Applying Puppet manifests                            [ DONE ]
Finalizing                                           [ DONE ]

 **** Installation completed successfully ******

Additional information:
  ......

登录OpenStack首页测试：https://192.168.43.129/dashboard，登录成功后无需做配置

配置OVS桥接

修改控制节点的网卡配置文件
先将网卡配置文件做备份，防止出现故障时无法恢复
创建OVS桥接，修改网卡配置文件
修改网卡桥接，重启网络服务

[root@Controller ~]# cd /etc/sysconfig/network-scripts/
[root@Controller network-scripts]# cp ifcfg-eth0 ifcfg-eth0.bak
[root@Controller network-scripts]# cp ifcfg-eth0 ifcfg-br-ex
[root@Controller network-scripts]# vim ifcfg-br-ex
  TYPE=OVSBridge
  NAME=br-ex
  DEVICE=br-ex
  ONBOOT=yes
  DEVICETYPE=ovs
  OVS_BRIDGE=br-ex
  IPADDR=192.168.43.129
  NETMASK=255.255.255.0
  GATEWAY=192.168.43.1
  DNS1=192.168.43.1
[root@Controller network-scripts]# vim ifcfg-eth0
  TYPE=OVSPort
  NAME=eth0
  DEVICE=eth0
  ONBOOT=yes
  DEVICETYPE=ovs
  OVS_BRIDGE=br-ex
[root@Controller network-scripts]# service network restart
Restarting network (via systemctl):                        [  OK  ]
[root@Controller network-scripts]# ifconfig
br-ex: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.43.129  netmask 255.255.255.0  broadcast 192.168.43.255
        inet6 fe80::742d:32ff:fe73:e74f  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:52:94:1d  txqueuelen 0  (Ethernet)
        RX packets 93  bytes 7953 (7.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 137  bytes 17053 (16.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-int: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::14b6:b1ff:fe67:294e  prefixlen 64  scopeid 0x20<link>
        ether 16:b6:b1:67:29:4e  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 648 (648.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::20c:29ff:fe52:941d  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:52:94:1d  txqueuelen 1000  (Ethernet)
        RX packets 212126  bytes 219696484 (209.5 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 106409  bytes 18842452 (17.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 496279  bytes 74615394 (71.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 496279  bytes 74615394 (71.1 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

以上内容均属原创，如有不详或错误，敬请指出。

以上是关于原生RedHat OpenStack搭建的主要内容，如果未能解决你的问题，请参考以下文章

原生RedHat OpenStack搭建

OpenStack组件系列?Keystone搭建

云计算与Open Stack概述+架构详解