ini XAMPP httpd.conf

Posted 2021-05-24

    
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
    #
    # Example:  
    # LoadModule foo_module modules/mod_foo.so
    #
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User daemon
    Group daemon

    </IfModule>
    </IfModule>
  
    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file. 
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [e-mail]
    #
    ServerAdmin postmaster@localhost

    #
    # ServerName gives the name and port that the server uses to identify itself.This can often be determined automatically, but we recommend you specify it explicitly to   prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    ServerName localhost:80

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "C:/xampp/htdocs"

    #
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories). 
    #
    # First, we configure the "default" to be a very restrictive set of 
    # features.  
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    </Directory>

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
    </IfModule>

    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog "logs/error.log"

    #ScriptLog "logs/cgi.log"

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    <IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
    </IfModule>

    <IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

    </IfModule>

    <IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock "logs/cgi.sock"
    </IfModule>

    #
    # "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "C:/xampp/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    <IfModule mime_module>
        #
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        #
        TypesConfig "conf/mime.types"

        #
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #
        #AddType application/x-gzip .tgz
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        #
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz

        #
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        #
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #
        AddHandler cgi-script .cgi .pl .asp .py

        # For type maps (negotiated resources):
        #AddHandler type-map var

        #
        # Filters allow you to process content before it is sent to the client.
        #
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #
        AddType text/html .shtml
        AddOutputFilter INCLUDES .shtml
    </IfModule>

    <IfModule mime_magic_module>
        #
        # The mod_mime_magic module allows the server to use various hints from the
        # contents of the file itself to determine its type.  The MIMEMagicFile
        # directive tells the module where the hint definitions are located.
        #
        MIMEMagicFile "conf/magic"
    </IfModule>

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://localhost/subscription_info.html
    #

    #
    # EnableMMAP and EnableSendfile: On systems that support it,  
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted 
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    #EnableMMAP off
    #EnableSendfile off
 
    # Supplemental configuration
    #
    # The configuration files in the conf/extra/ directory can be 
    # included to add extra features or to modify the default configuration of 
    # the server, or you may simply copy their contents here and change as 
    # necessary.

    # XAMPP specific settings
    Include "conf/extra/httpd-xampp.conf"

    # Perl settings
    Include "conf/extra/httpd-perl.conf"

    # Server-pool management (MPM specific)
    Include "conf/extra/httpd-mpm.conf"

    # Multi-language error messages
    Include "conf/extra/httpd-multilang-errordoc.conf"

    # Fancy directory listings
    Include "conf/extra/httpd-autoindex.conf"

    # Language settings
    Include "conf/extra/httpd-languages.conf"

    # User home directories
    Include "conf/extra/httpd-userdir.conf"

    # Real-time info on requests and configuration
    Include "conf/extra/httpd-info.conf"

    # Virtual hosts 
    Include "conf/extra/httpd-vhosts.conf"

    # Distributed authoring and versioning (WebDAV)
    # Attention! WEB_DAV is a security risk without a new userspecific configuration for a      secure authentifcation 
    # Include "conf/extra/httpd-dav.conf"

    # Implements a proxy/gateway for Apache.
    Include "conf/extra/httpd-proxy.conf"

    # Various default settings
    Include "conf/extra/httpd-default.conf"

    # Secure (SSL/TLS) connections
    Include "conf/extra/httpd-ssl.conf"  
    #
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
        SSLRandomSeed startup builtin
        SSLRandomSeed connect builtin
        SSLSessionCache "shmcb:logs/ssl.scache(512000)"
        SSLSessionCacheTimeout 300
    </IfModule>

    # AJP13 Proxy
    <IfModule mod_proxy.c>
    <IfModule mod_proxy_ajp.c>
    Include "conf/extra/httpd-ajp.conf"
    </IfModule>
    </IfModule>