sh 在GCE上安装vpn

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了sh 在GCE上安装vpn相关的知识,希望对你有一定的参考价值。

#!/bin/sh
#
# Automatic configuration of a VPN on GCE debian-7-wheezy server. 
# Tested only on debian-7-wheezy.
#
# This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 
# Unported License: http://creativecommons.org/licenses/by-sa/3.0/
#
# Thx to: https://github.com/sarfata/voodooprivacy/blob/master/voodoo-vpn.sh for the code/idea
#

# TODO:
IPSEC_PSK=YOUR-KEY
VPN_USER=yourName
VPN_PASSWORD=yourPASSWORD

# Get the 2 ips from: https://console.developers.google.com and click on your instance
PRIVATE_IP=YOUR_PRIVATE_IP
PUBLIC_IP=YOUR_PUBLIC_IP

# start with the basic and install openswan
apt-get install -y openswan xl2tpd

cat > /etc/ipsec.conf <<EOF
version 2.0

config setup
  dumpdir=/var/run/pluto/
  nat_traversal=yes
  virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10
  oe=off
  protostack=netkey
  nhelpers=0
  interfaces=%defaultroute

conn vpnpsk
  auto=add
  left=$PRIVATE_IP
  leftid=$PUBLIC_IP
  leftsubnet=$PRIVATE_IP/32
  leftnexthop=%defaultroute
  leftprotoport=17/1701
  rightprotoport=17/%any
  right=%any
  rightsubnetwithin=0.0.0.0/0
  forceencaps=yes
  authby=secret
  pfs=no
  type=transport
  auth=esp
  ike=3des-sha1
  phase2alg=3des-sha1
  dpddelay=30
  dpdtimeout=120
  dpdaction=clear
EOF

cat > /etc/ipsec.secrets <<EOF
$PUBLIC_IP  %any  : PSK "$IPSEC_PSK"
EOF

cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[global]
port = 1701

;debug avp = yes
;debug network = yes
;debug state = yes
;debug tunnel = yes

[lns default]
ip range = 192.168.42.10-192.168.42.250
local ip = 192.168.42.1
require chap = yes
refuse pap = yes
require authentication = yes
name = l2tpd
;ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
EOF

cat > /etc/ppp/options.xl2tpd <<EOF
ipcp-accept-local
ipcp-accept-remote
ms-dns 8.8.8.8
ms-dns 8.8.4.4
noccp
auth
crtscts
idle 1800
mtu 1280
mru 1280
lock
connect-delay 5000
EOF

cat > /etc/ppp/chap-secrets <<EOF
# Secrets for authentication using CHAP
# client	server	secret			IP addresses

$VPN_USER	l2tpd   $VPN_PASSWORD   *
EOF

iptables -t nat -A POSTROUTING -s 192.168.42.0/24 -o eth0 -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward

iptables-save > /etc/iptables.rules

cat > /etc/network/if-pre-up.d/iptablesload <<EOF
#!/bin/sh
iptables-restore < /etc/iptables.rules
echo 1 > /proc/sys/net/ipv4/ip_forward
exit 0
EOF

chmod a+x /etc/network/if-pre-up.d/iptablesload

/etc/init.d/ipsec restart
/etc/init.d/xl2tpd restart

以上是关于sh 在GCE上安装vpn的主要内容,如果未能解决你的问题,请参考以下文章

sh 安装softether vpn服务器

sh centos6安装VPN脚本

sh centos6安装VPN脚本

sh GCE每日调度快照备份

sh 在debian上使用strongSwan建立安全的VPN

sh 关于GCE自动化脚本的Shadowsocks