数字信号调制基于matlab GUI PCM编码和QAM调制系统含Matlab源码 2080期

Posted 2022-09-09 海神之光

一、PCM编码+QAM调制简介

1 PCM
数字信号是对连续变化的模拟信号进行抽样、量化和编码产生的，称为PCM（Pulse Code Modulation），即脉冲编码调制。
脉冲编码调制就是把一个时间连续，取值连续的模拟信号变换成时间离散，取值离散的数字信号后在信道中传输。脉冲编码调制就是对模拟信号先抽样，再对样值幅度量化，编码的过程。
抽样，就是对模拟信号进行周期性扫描，把时间上连续的信号变成时间上离散的信号。该模拟信号经过抽样后还应当包含原信号中所有信息，也就是说能无失真的恢复原模拟信号。它的抽样速率的下限是由抽样定理确定的。抽样速率采用8Kbit/s。
量化，就是把经过抽样得到的瞬时值将其幅度离散，即用一组规定的电平，把瞬时抽样值用最接近的电平值来表示。
一个模拟信号经过抽样量化后，得到已量化的脉冲幅度调制信号，它仅为有限个数值。编码，就是用一组二进制码组来表示每一个有固定电平的量化值。然而，实际上量化是在编码过程中同时完成的，故编码过程也称为模/数变换，可记作A/D。
话音信号先经防混叠低通滤波器，进行脉冲抽样，变成8KHz重复频率的抽样信号（即离散的脉冲调幅PAM信号），然后将幅度连续的PCM信号用“四舍五入”办法量化为有限个幅度取值的信号，再经编码后转换成二进制码。对于电话，CCITT规定抽样率为8KHz，每抽样值编8位码，即共有2^8=256个量化值，因而每话路PCM编码后的标准数码率是64kb/s。为解决均匀量化时小信号量化误差大，音质差的问题，在实际中采用不均匀选取量化间隔的非线性量化方法，即量化特性在小信号时分层密，量化间隔小，而在大信号时分层疏，量化间隔大。均匀量化的小信号的信噪比小。
非均匀量化: 由于一些信源信号, 如语音信号, 小幅度信号发生的概率大于大幅度信号的概率, 采用非均匀量化(即小幅度信号的量化步长小于大幅度信号的的量化步长) 效果更好好 (表现在语音信号上, 可以使信号具有足够的信噪比)。非均匀量化特性通常是把信号通过一个非线性的设备, 小信号幅度进行放大, 大信号幅度进行压缩, 再通过均匀量化实现。

2 常规双边带调幅AM
t 域：已调信号的波形，调制/解调方法
f 域：已调信号的频谱，带宽B
AM信号的包络正比于消息信号的规律，因此可以采用简单的**包络检波方法（非相干解调）**解调；
频谱由载波、上边带USB、下边带LSB组成。带宽BAM=2fH；
幅度调制又称为线性调制；
应用：中短波调幅广播。
缺点：功率利用率低，最多达到50%

二、源代码

function varargout = test(varargin)
% TEST M-file for test.fig
%      TEST, by itself, creates a new TEST or raises the existing
%      singleton*.
%
%      H = TEST returns the handle to a new TEST or the handle to
%      the existing singleton*.
%
%      TEST('CALLBACK',hObject,eventData,handles,...) calls the local
%      function named CALLBACK in TEST.M with the given input arguments.
%
%      TEST('Property','Value',...) creates a new TEST or raises the
%      existing singleton*.  Starting from the left, property value pairs are
%      applied to the GUI before test_OpeningFunction gets called.  An
%      unrecognized property name or invalid value makes property application
%      stop.  All inputs are passed to test_OpeningFcn via varargin.
%
%      *See GUI Options on GUIDE's Tools menu.  Choose "GUI allows only one
%      instance to run (singleton)".
%
% See also: GUIDE, GUIDATA, GUIHANDLES

% Edit the above text to modify the response to About test

% Last Modified by GUIDE v2.5 04-Jul-2021 19:27:45

% Begin initialization code - DO NOT EDIT
gui_Singleton = 1;
gui_State = struct('gui_Name',       mfilename, ...
                   'gui_Singleton',  gui_Singleton, ...
                   'gui_OpeningFcn', @test_OpeningFcn, ...
                   'gui_OutputFcn',  @test_OutputFcn, ...
                   'gui_LayoutFcn',  [] , ...
                   'gui_Callback',   []);
if nargin && ischar(varargin1)
    gui_State.gui_Callback = str2func(varargin1);
end

if nargout
    [varargout1:nargout] = gui_mainfcn(gui_State, varargin:);
else
    gui_mainfcn(gui_State, varargin:);
end
% End initialization code - DO NOT EDIT


% --- Executes just before test is made visible.
function test_OpeningFcn(hObject, eventdata, handles, varargin)
% This function has no output args, see OutputFcn.
% hObject    handle to figure
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
% varargin   command line arguments to test (see VARARGIN)

% Choose default command line output for test
handles.output = hObject;

% Update handles structure
guidata(hObject, handles);

% UIWAIT makes test wait for user response (see UIRESUME)
% uiwait(handles.figure1);


% --- Outputs from this function are returned to the command line.
function varargout = test_OutputFcn(hObject, eventdata, handles) 
% varargout  cell array for returning output args (see VARARGOUT);
% hObject    handle to figure
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)

% Get default command line output from handles structure
varargout1 = handles.output;


% --- Executes on button press in LOAD.
function LOAD_Callback(hObject, eventdata, handles)
% hObject    handle to LOAD (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
global x fs t
[x,fs] = audioread('test.wav');
t = (1:length(x))/fs;
t8 = length(x)*8;
t8 = (1:t8)/fs;
Bs =  0.5*fs;
save('data.mat','x','fs','t','t8');

N = length(x); 
X=fft(x,N);%进行fft变换
mag=abs(X);%求幅值
f=(0:length(X)-1)'*fs/length(X);%进行对应的频率转换

subplot(2,1,1,'position',[0.3 0.57 0.6 0.3]);
plot(t,x)   %时域图
xlabel('时间');
ylabel('幅值');
axis([min(t) max(t) min(x) max(x)]);
subplot(2,1,2,'position',[0.3 0.2 0.6 0.3]);
plot(f,mag);%做频谱图
xlabel('频率');
ylabel('幅值');
axis([0 max(f) 0 1.1*max(abs(X)) ]);

set(handles.LOAD,'enable','off');
set(handles.PCM,'enable','on');
%set(handles.Play_origin,'enable','on');
set(handles.text1,'String','测试音频文件波形如图所示');


% --- Executes on button press in PCM.
function PCM_Callback(hObject, eventdata, handles)
% hObject    handle to PCM (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
load data.mat;
x1 = x./max(abs(x));
sxx = floor( x1 * 4096 );
y = pcm_encode(sxx);
save('data.mat','y','-append');
subplot(1,1,1,'position',[0.3 0.2 0.6 0.65]);
plot(t8,y);
xlabel('时间');
ylabel('幅值');
axis([0 0.1 -1 2]);
set(handles.dePCM,'enable','on');
set(handles.QAM,'enable','on');
set(handles.text1,'String','经过PCM编码后，形成二进制码流');


% --- Executes on button press in QAM.
function QAM_Callback(hObject, eventdata, handles)
% hObject    handle to QAM (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
prompt='信道SNR:';
name='Input';
numlines=1;
defaultanswer='20';
answer=inputdlg(prompt,name,numlines,defaultanswer);
if  ~isempty(answer) ,
result = str2num(answer1,1);
load data.mat;
Qt = my_qammod(y);
Qr = awgn(Qt,result);
yy= my_qamdemod(Qr);
save('data.mat','yy','-append');
subplot(1,1,1,'position',[0.3 0.2 0.6 0.65]);
plot(t8,yy);
xlabel('时间');
ylabel('幅值');
axis([0 0.1 -1 2]);
set(handles.compare2,'enable','on');
set(handles.text1,'String','PCM信号通过QAM调制，送到AWGN信道，再经过解调还原为PCM信号');
end

% --- Executes on button press in dePCM.
function dePCM_Callback(hObject, eventdata, handles)
% hObject    handle to dePCM (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
load data.mat;
xx = pcm_decode(y,max(abs(x)));
save('data.mat','xx','-append');
N = length(xx); 
XX=fft(xx,N);%进行fft变换
mag=abs(XX);%求幅值
f=(0:length(XX)-1)'*fs/length(XX);%进行对应的频率转换
function qt = my_qammod(b)

[nrow,ncol]=size(b);
col=ncol/4;
b_2=reshape(b,4,col);
b_2=b_2';
b_str2=int2str(b_2);
b_10=bin2dec(b_str2);
b_10=b_10';  
% --- Executes on button press in Play_arrive.
%function Play_arrive_Callback(hObject, eventdata, handles)
% hObject    handle to Play_arrive (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
%load data.mat;
%wavplay(xx);



% --- Executes on button press in BYE.
function BYE_Callback(hObject, eventdata, handles)
% hObject    handle to BYE (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
close



% --------------------------------------------------------------------
function About_Callback(hObject, eventdata, handles)
% hObject    handle to About (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
msgbox('        本程序完成对简单音频信号的取样，' 'PCM编码，QAM调制， 通过AWGN信道， ' 'QAM解调，PCM解码的一系列方针操作。'  '作者：吕非彼' '电信工程学院 05114班 ' '学号:050430 序号:12','About','Help') 


% --- Executes during object creation, after setting all properties.
%function Play_origin_CreateFcn(hObject, eventdata, handles)
% hObject    handle to Play_origin (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    empty - handles not created until after all CreateFcns called


% --- Executes during object deletion, before destroying properties.
%function Play_origin_DeleteFcn(hObject, eventdata, handles)
% hObject    handle to Play_origin (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)


% --- If Enable == 'on', executes on mouse press in 5 pixel border.
% --- Otherwise, executes on mouse press in 5 pixel border or over Play_origin.
%function Play_origin_ButtonDownFcn(hObject, eventdata, handles)
% hObject    handle to Play_origin (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)

三、运行结果

四、matlab版本及参考文献

1 matlab版本
2014a

2 参考文献
[1] 沈再阳.精通MATLAB信号处理[M].清华大学出版社，2015.
[2]高宝建,彭进业,王琳,潘建寿.信号与系统——使用MATLAB分析与实现[M].清华大学出版社，2020.
[3]王文光,魏少明,任欣.信号处理与系统分析的MATLAB实现[M].电子工业出版社，2018.

3 备注
简介此部分摘自互联网，仅供参考，若侵权，联系删除