[kubernetes] 跨云厂商使用公网IP搭建k8s v1.20.9集群

Posted 2022-04-01 运维少年

    最近双11，各大云厂家都在搞活动，所以我在腾讯云和阿里云都各买了一台服务器玩玩。之前的实验环境都是在家里的笔记本用虚拟机搭的，想着搭一套云上的玩一下，本文参照https://blog.csdn.net/chen645800876/article/details/105833835进行操作，搭建后暂时没有遇到问题，配置前一定要配置安全组/防火墙放通端口哦!

    两台服务器均使用了Centos 7.6的操作系统，环境如下：

​​0x01 安装docker（所有主机）​​

    1）配置yum源

sudo yum install -y yum-utils
sudo yum-config-manager \\
--add-repo \\
http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

    2）安装docker

sudo yum install -y docker-ce docker-ce-cli containerd.io


#以下是在安装k8s的时候使用
yum install -y docker-ce-20.10.7 docker-ce-cli-20.10.7  containerd.io-1.4.6

    3）启动docker

systemctl enable docker --now

    4）配置加速

sudo mkdir -p /etc/docker
sudo tee /etc/docker/daemon.json <<-EOF

  "registry-mirrors": ["https://82m9ar63.mirror.aliyuncs.com"],
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": 
    "max-size": "100m"
  ,
  "storage-driver": "overlay2"

EOF
sudo systemctl daemon-reload
sudo systemctl restart docker

​​0x02 配置基础环境（所有主机）
​    1）配置参数
​

# 将 SELinux 设置为 permissive 模式（相当于将其禁用）
sudo setenforce 0
sudo sed -i s/^SELINUX=enforcing$/SELINUX=permissive/ /etc/selinux/config

#关闭swap
swapoff -a  
sed -ri s/.*swap.*/#&/ /etc/fstab

#允许 iptables 检查桥接流量
cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOF

cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sudo sysctl --system

    2）下载镜像

sudo tee ./images.sh <<-EOF
#!/bin/bash
images=(
kube-apiserver:v1.20.9
kube-proxy:v1.20.9
kube-controller-manager:v1.20.9
kube-scheduler:v1.20.9
coredns:1.7.0
etcd:3.4.13-0
pause:3.2
)
for imageName in $images[@] ; do
docker pull registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images/$imageName
done
EOF

chmod +x ./images.sh && ./images.sh

​​0x03 安装kubernetes​​

    1）安装kubelet、kubeadm、kubectl（所有主机）

cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
   http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
exclude=kubelet kubeadm kubectl
EOF


sudo yum install -y kubelet-1.20.9 kubeadm-1.20.9 kubectl-1.20.9 --disableexcludes=kubernetes

sudo systemctl enable --now kubelet

    2）建立虚拟机网卡（重要！所有机器都需要做）

# step1 ，注意替换你的公网IP进去
cat > /etc/sysconfig/network-scripts/ifcfg-eth0:1 <<EOF
BOOTPROTO=static
DEVICE=eth0:1
IPADDR=你的公网IP
PREFIX=32
TYPE=Ethernet
USERCTL=no
ONBOOT=yes
EOF
# step2 如果是centos8，需要重启
systemctl restart network
# step3 查看新建的IP是否进去
ip addr

    3）修改kubelet启动参数文件（所有节点）

# 此文件安装kubeadm后就存在了
vim /usr/lib/systemd/system/kubelet.service.d/10-kubeadm.conf

# 注意，这步很重要，如果不做，节点仍然会使用内网IP注册进集群
# 在末尾添加参数 --node-ip=公网IP
ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_KUBEADM_ARGS $KUBELET_EXTRA_ARGS --node-ip=xx.xx.xx.xx

    4）添加配置文件（master）

# step1 添加配置文件，注意替换下面的IP
cat > kubeadm-config.yaml <<EOF
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.20.9
apiServer:
  certSANs:    #填写所有kube-apiserver节点的hostname、IP、VIP
  - master    #请替换为hostname
  - xx.xx.xx.xx   #请替换为公网IP
  - xx.xx.xx.xx  #请替换为私网IP
  - 10.96.0.1   #不要替换，此IP是API的集群地址，部分服务会用到
controlPlaneEndpoint: 119.91.201.51:6443 #替换为公网IP
imageRepository: registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images
networking:
  podSubnet: 10.244.0.0/16
  serviceSubnet: 10.96.0.0/12
--- 
apiVersion: kubeproxy-config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
featureGates:
  SupportIPVSProxyMode: true
mode: ipvs
EOF

# step2 如果是1核心或者1G内存的请在末尾添加参数（--ignore-preflight-errors=all），否则会初始化失败
# 同时注意，此步骤成功后，会打印，两个重要信息
kubeadm init --config=kubeadm-config.yaml

    安装成功后会出现以下信息，请保存一下：

    5）安装后配置（master）

# 信息1 上面初始化成功后，将会生成kubeconfig文件，用于请求api服务器，请执行下面操作
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

    6）修改kube-apiserver参数（master，只修改注释项，其余的不要动）

# 修改两个信息，添加--bind-address和修改--advertise-address
vim /etc/kubernetes/manifests/kube-apiserver.yaml

apiVersion: v1
kind: Pod
metadata:
  annotations:
    kubeadm.kubernetes.io/kube-apiserver.advertise-address.endpoint: 10.0.20.8:6443
  creationTimestamp: null
  labels:
    component: kube-apiserver
    tier: control-plane
  name: kube-apiserver
  namespace: kube-system
spec:
  containers:
  - command:
    - kube-apiserver
    - --advertise-address=xx.xx.xx.xx # 修改为公网IP
    - --bind-address=0.0.0.0  # 新增参数
    - --allow-privileged=true
    - --authorization-mode=Node,RBAC
    - --client-ca-file=/etc/kubernetes/pki/ca.crt
    - --enable-admission-plugins=NodeRestriction
    - --enable-bootstrap-token-auth=true
    - --etcd-cafile=/etc/kubernetes/pki/etcd/ca.crt
    - --etcd-certfile=/etc/kubernetes/pki/apiserver-etcd-client.crt
    - --etcd-keyfile=/etc/kubernetes/pki/apiserver-etcd-client.key
    - --etcd-servers=https://127.0.0.1:2379
    - --insecure-port=0
    - --kubelet-client-certificate=/etc/kubernetes/pki/apiserver-kubelet-client.crt
    - --kubelet-client-key=/etc/kubernetes/pki/apiserver-kubelet-client.key
    - --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
    - --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.crt
    - --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client.key
    - --requestheader-allowed-names=front-proxy-client
    - --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt
    - --requestheader-extra-headers-prefix=X-Remote-Extra-
    - --requestheader-group-headers=X-Remote-Group
    - --requestheader-username-headers=X-Remote-User
    - --secure-port=6443
    - --service-account-issuer=https://kubernetes.default.svc.cluster.local
    - --service-account-key-file=/etc/kubernetes/pki/sa.pub
    - --service-account-signing-key-file=/etc/kubernetes/pki/sa.key
    - --service-cluster-ip-range=10.96.0.0/12
    - --tls-cert-file=/etc/kubernetes/pki/apiserver.crt
    - --tls-private-key-file=/etc/kubernetes/pki/apiserver.key
    image: registry.cn-hangzhou.aliyuncs.com/lfy_k8s_images/kube-apiserver:v1.20.9
    imagePullPolicy: IfNotPresent
    livenessProbe:
      failureThreshold: 8
      httpGet:
        host: 10.0.20.8
        path: /livez
        port: 6443
        scheme: HTTPS
      initialDelaySeconds: 10
      periodSeconds: 10
      timeoutSeconds: 15
    name: kube-apiserver
    readinessProbe:
      failureThreshold: 3
      httpGet:
        host: 10.0.20.8
        path: /readyz
        port: 6443
        scheme: HTTPS
      periodSeconds: 1
      timeoutSeconds: 15
    resources:
      requests:
        cpu: 250m
    startupProbe:
      failureThreshold: 24
      httpGet:
        host: 10.0.20.8
        path: /livez
        port: 6443
        scheme: HTTPS
      initialDelaySeconds: 10
      periodSeconds: 10
      timeoutSeconds: 15
    volumeMounts:
    - mountPath: /etc/ssl/certs
      name: ca-certs
      readOnly: true
    - mountPath: /etc/pki
      name: etc-pki
      readOnly: true
    - mountPath: /etc/kubernetes/pki
      name: k8s-certs
      readOnly: true
  hostNetwork: true
  priorityClassName: system-node-critical
  volumes:
  - hostPath:
      path: /etc/ssl/certs
      type: DirectoryOrCreate
    name: ca-certs
  - hostPath:
      path: /etc/pki
      type: DirectoryOrCreate
    name: etc-pki
  - hostPath:
      path: /etc/kubernetes/pki
      type: DirectoryOrCreate
    name: k8s-certs
status: 

    7）保存后kube-apiserver会被自动重启，确认pod被重启

    8）node节点加入集群（命令用安装后输出的那一段）

# 信息2 此信息用于后面工作节点加入主节点使用
kubeadm join xx.xx.xx.xx:6443 --token sdfs.dsfsdfsdfijdth \\
    --discovery-token-ca-cert-hash sha256:sdfsdfsdfsdfsdfsdfsdfsdfg9a460f44b118050091245c1d

    9）安装flannel网络插件

[root@txy201-51 ~]# cat flannel.yaml 
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
  - configMap
  - secret
  - emptyDir
  - hostPath
  allowedHostPaths:
  - pathPrefix: "/etc/cni/net.d"
  - pathPrefix: "/etc/kube-flannel"
  - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: [NET_ADMIN, NET_RAW]
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: RunAsAny
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
rules:
- apiGroups: [extensions]
  resources: [podsecuritypolicies]
  verbs: [use]
  resourceNames: [psp.flannel.unprivileged]
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        
          "type": "flannel",
          "delegate": 
            "hairpinMode": true,
            "isDefaultGateway": true
          
        ,
        
          "type": "portmap",
          "capabilities": 
            "portMappings": true
          
        
      ]
    
  net-conf.json: |
    
      "Network": "10.244.0.0/16",  # 这里是kubeadm-config.yaml配置的podsnetwork
      "Backend": 
        "Type": "vxlan"
      
    
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.14.0
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.14.0
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        - --public-ip=$(PUBLIC_IP)  # 新增
        - --iface=eth0   # 新增
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: PUBLIC_IP #新增
          valueFrom:   #新增
            fieldRef: #新增
              fieldPath: status.podIP #新增
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg

    10）创建

#创建flannel
kubectl apply -f flannel.yaml
# 查看flannel是否正常运行
[root@txy201-51 ~]# kubectl get pods -A| grep flannel

‍

​​0x04 测试​​

    1）查看nodes

    2）查看pods

    3）创建测试pod

# 创建deployment
kubectl create deployment nginx --image=nginx
# 查看pod信息
kubectl get pods -o wide

    4）测试网络可达性