Android 源码分析 Handler 异步消息机制

Posted 2020-12-02 时间碎片

android 源码分析,Handler 异步消息机制

一.Handler 使用方法:

 Handler handler = new Handler() {
        @Override
        public void handleMessage(Message msg) {
            super.handleMessage(msg);
            switch (msg.what) {
                case 1:
                    Log.i(TAG,"UI thread sendEmptyMessage...1");
                    break;
                case 2:
                    Log.i(TAG,"thread sendEmptyMessage...2");
                    break;
                case 3:
                    Log.i(TAG,"thread sendMessage...3");
                    break;
                case 4:
                    Log.i(TAG,"UI thread sendMessage...4");
                    break;
            }
        }
    };
    
    
    handler.sendEmptyMessage(1);

    handler.postDelayed(new Runnable() {
            @Override
            public void run() {
                handler.sendEmptyMessage(2);

                Message msg = new Message();
                msg.what = 3;
                handler.sendMessage(msg);
            }
        }, 1000);

    Message msg2 = new Message();
    msg2.what = 4;
    handler.sendMessage(msg2);

输出结果:

二.源码分析

从handler.sendMessage(msg)进去看看源码怎么调用的.

//Handler.java
        
        //Looper.prepare()方法初始化了一个Looper对象并关联在一个MessageQueue对象，并且一个线程中只有一个Looper对象，只有一个MessageQueue对象。
        //Handler的构造方法则在Handler内部维护了当前线程的Looper对象
    public Handler(Callback callback, boolean async) {
        ......
        mLooper = Looper.myLooper();
        if (mLooper == null) {
            throw new RuntimeException(
                "Can\'t create handler inside thread that has not called Looper.prepare()");
        }
        ......
    }
        
    // if we can get rid of this method, the handler need not remember its loop
    // we could instead export a getMessageQueue() method... 
    public final Looper getLooper() {
        return mLooper;
    }

    /**
     * Pushes a message onto the end of the message queue after all pending messages
     * before the current time. It will be received in {@link #handleMessage},
     * in the thread attached to this handler.
     *  
     * @return Returns true if the message was successfully placed in to the 
     *         message queue.  Returns false on failure, usually because the
     *         looper processing the message queue is exiting.
     */
    public final boolean sendMessage(Message msg)
    {
        //参数 0 代表,无延迟.
        return sendMessageDelayed(msg, 0);
    }
    
     /**
     * Enqueue a message into the message queue after all pending messages
     * before (current time + delayMillis). You will receive it in
     * {@link #handleMessage}, in the thread attached to this handler.
     *  
     * @return Returns true if the message was successfully placed in to the 
     *         message queue.  Returns false on failure, usually because the
     *         looper processing the message queue is exiting.  Note that a
     *         result of true does not mean the message will be processed -- if
     *         the looper is quit before the delivery time of the message
     *         occurs then the message will be dropped.
     */
    public final boolean sendMessageDelayed(Message msg, long delayMillis)
    {
        if (delayMillis < 0) {
            delayMillis = 0;
        }
        return sendMessageAtTime(msg, SystemClock.uptimeMillis() + delayMillis);
    }
    
    /**
     * Enqueue a message into the message queue after all pending messages
     * before the absolute time (in milliseconds) <var>uptimeMillis</var>.
     * <b>The time-base is {@link android.os.SystemClock#uptimeMillis}.</b>
     * Time spent in deep sleep will add an additional delay to execution.
     * You will receive it in {@link #handleMessage}, in the thread attached
     * to this handler.
     * 
     * @param uptimeMillis The absolute time at which the message should be
     *         delivered, using the
     *         {@link android.os.SystemClock#uptimeMillis} time-base.
     *         
     * @return Returns true if the message was successfully placed in to the 
     *         message queue.  Returns false on failure, usually because the
     *         looper processing the message queue is exiting.  Note that a
     *         result of true does not mean the message will be processed -- if
     *         the looper is quit before the delivery time of the message
     *         occurs then the message will be dropped.
     */
    public boolean sendMessageAtTime(Message msg, long uptimeMillis) {
        MessageQueue queue = mQueue;
        if (queue == null) {
            RuntimeException e = new RuntimeException(
                    this + " sendMessageAtTime() called with no mQueue");
            Log.w("Looper", e.getMessage(), e);
            return false;
        }
        return enqueueMessage(queue, msg, uptimeMillis);
    }
    
    private boolean enqueueMessage(MessageQueue queue, Message msg, long uptimeMillis) {
        msg.target = this;
        if (mAsynchronous) {
            msg.setAsynchronous(true);
        }
        return queue.enqueueMessage(msg, uptimeMillis);
    }

    //msg.target就是Handler对象本身；而这里的queue对象就是我们的Handler内部维护的Looper对象关联的MessageQueue对象.

//MessageQueue.java
    boolean enqueueMessage(Message msg, long when) {
        if (msg.target == null) {
            throw new IllegalArgumentException("Message must have a target.");
        }
        if (msg.isInUse()) {
            throw new IllegalStateException(msg + " This message is already in use.");
        }

        synchronized (this) {
            if (mQuitting) {
                IllegalStateException e = new IllegalStateException(
                        msg.target + " sending message to a Handler on a dead thread");
                Log.w(TAG, e.getMessage(), e);
                msg.recycle();
                return false;
            }

            msg.markInUse();
            msg.when = when;
            Message p = mMessages;
            boolean needWake;
            if (p == null || when == 0 || when < p.when) {
                // New head, wake up the event queue if blocked.
                msg.next = p;
                mMessages = msg;
                needWake = mBlocked;
            } else {
                // Inserted within the middle of the queue.  Usually we don\'t have to wake
                // up the event queue unless there is a barrier at the head of the queue
                // and the message is the earliest asynchronous message in the queue.
                needWake = mBlocked && p.target == null && msg.isAsynchronous();
                Message prev;
                for (;;) {
                    prev = p;
                    p = p.next;
                    if (p == null || when < p.when) {
                        break;
                    }
                    if (needWake && p.isAsynchronous()) {
                        needWake = false;
                    }
                }
                msg.next = p; // invariant: p == prev.next
                prev.next = msg;
            }

            // We can assume mPtr != 0 because mQuitting is false.
            if (needWake) {
                nativeWake(mPtr);
            }
        }
        return true;
    }

//Looper.java
    /**
     * Run the message queue in this thread. Be sure to call
     * {@link #quit()} to end the loop.
     */
    public static void loop() {
        final Looper me = myLooper();
        if (me == null) {
            throw new RuntimeException("No Looper; Looper.prepare() wasn\'t called on this thread.");
        }
        final MessageQueue queue = me.mQueue;

        // Make sure the identity of this thread is that of the local process,
        // and keep track of what that identity token actually is.
        Binder.clearCallingIdentity();
        final long ident = Binder.clearCallingIdentity();

        //Looper.loop()方法里起了一个死循环，不断的判断MessageQueue中的消息是否为空，如果为空则直接return掉，然后执行queue.next()方法：
        for (;;) {
            Message msg = queue.next(); // might block
            if (msg == null) {
                // No message indicates that the message queue is quitting.
                return;
            }

            // This must be in a local variable, in case a UI event sets the logger
            final Printer logging = me.mLogging;
            if (logging != null) {
                logging.println(">>>>> Dispatching to " + msg.target + " " +
                        msg.callback + ": " + msg.what);
            }

            final long slowDispatchThresholdMs = me.mSlowDispatchThresholdMs;

            final long traceTag = me.mTraceTag;
            if (traceTag != 0 && Trace.isTagEnabled(traceTag)) {
                Trace.traceBegin(traceTag, msg.target.getTraceName(msg));
            }
            final long start = (slowDispatchThresholdMs == 0) ? 0 : SystemClock.uptimeMillis();
            final long end;
            try {
                //msg.target就是Handler对象本身
                msg.target.dispatchMessage(msg);
                end = (slowDispatchThresholdMs == 0) ? 0 : SystemClock.uptimeMillis();
            } finally {
                if (traceTag != 0) {
                    Trace.traceEnd(traceTag);
                }
            }
            if (slowDispatchThresholdMs > 0) {
                final long time = end - start;
                if (time > slowDispatchThresholdMs) {
                    Slog.w(TAG, "Dispatch took " + time + "ms on "
                            + Thread.currentThread().getName() + ", h=" +
                            msg.target + " cb=" + msg.callback + " msg=" + msg.what);
                }
            }

            if (logging != null) {
                logging.println("<<<<< Finished to " + msg.target + " " + msg.callback);
            }

            // Make sure that during the course of dispatching the
            // identity of the thread wasn\'t corrupted.
            final long newIdent = Binder.clearCallingIdentity();
            if (ident != newIdent) {
                Log.wtf(TAG, "Thread identity changed from 0x"
                        + Long.toHexString(ident) + " to 0x"
                        + Long.toHexString(newIdent) + " while dispatching to "
                        + msg.target.getClass().getName() + " "
                        + msg.callback + " what=" + msg.what);
            }

            msg.recycleUnchecked();
        }
    }

又回到Handler.java

//Handle.java
    /**
     * Handle system messages here.
     */
    public void dispatchMessage(Message msg) {
        if (msg.callback != null) {
            handleCallback(msg);
        } else {
            if (mCallback != null) {
                if (mCallback.handleMessage(msg)) {
                    return;
                }
            }
            handleMessage(msg);
        }
    }

    private static void handleCallback(Message message) {
        message.callback.run();
    }
    

补充: UI线程 调用 Loop.

    //ActivityThread.java
    public static void main(String[] args) {
        Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "ActivityThreadMain");
        SamplingProfilerIntegration.start();

        // CloseGuard defaults to true and can be quite spammy.  We
        // disable it here, but selectively enable it later (via
        // StrictMode) on debug builds, but using DropBox, not logs.
        CloseGuard.setEnabled(false);

        Environment.initForCurrentUser();

        // Set the reporter for event logging in libcore
        EventLogger.setReporter(new EventLoggingReporter());

        // Make sure TrustedCertificateStore looks in the right place for CA certificates
        final File configDir = Environment.getUserConfigDirectory(UserHandle.myUserId());
        TrustedCertificateStore.setDefaultUserDirectory(configDir);

        Process.setArgV0("<pre-initialized>");

        Looper.prepareMainLooper();

        ActivityThread thread = new ActivityThread();
        thread.attach(false);

        if (sMainThreadHandler == null) {
            sMainThreadHandler = thread.getHandler();
        }

        if (false) {
            Looper.myLooper().setMessageLogging(new
                    LogPrinter(Log.DEBUG, "ActivityThread"));
        }

        // End of event ActivityThreadMain.
        Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
        //主线程启动就调用了loop().
        Looper.loop();

        throw new RuntimeException("Main thread loop unexpectedly exited");
    }

三.总结:

一.Handler,Looper,MessageQue三者关系        

　　1.Looper：相当于消息的载体

     　　1) 它的内部有一个消息队列，也就是MessageQueue，Handler发送的所有消息都会走向这个消息队里。

     　　2) 它的Looper.loop方法是一个死循环，不断的从消息队列MessageQueue中取出消息。如果有消息存在就处理该消息，否则就阻塞。

    2.MessageQue：就是一个消息队列，可以向其中添加消息并处理消息。

    3.Handler其实就是发送消息处理消息的封装。它与Looper相关联，也就是说在Handler的内部可以找到Looper，找到了Looper就找到了相应的消息队列。因此Handler发送的消息都会走向MessageQueue。
      

 二.为什么不能在子线程中更新UI    

        如果在子线程更新UI，那么就会出现这样子的一种况：其中一个子线程更新界面还没有完成，另外一个子线程就又去更新UI了，这样子会造成子UI界面错乱。那么你可能会说，我们可以实行加锁机制啊，让更新UI的代码不能并发执行。如果每一个子线程都加锁，那么 毫无疑问程序的性能将会大大下降。因此主要的原因总结起来就是两点：

    （1）为了防止界面错乱

    （2）为了防止程序性能下降

     因此android不允许在子线程中更新UI。为了解决这个这个问题，android就设计出这样子的一套消息处理机制，让我们尽管在子线程中发送更新UI的消息，而不用去关心多线程问题。在主线程的消息队里中采取轮询更新处理。